Jiangyin Donghao Stainless Steel Tubing  
  Portugal | Japanese | Русский | España | Deutsch | English | Chinese Sitemap | Contact US



Carbon Steel 1010

1010 - General purpose steel. Good weldability and forming and extruding chrematistics. Often used for general structural and automotive bodies. AISI 1010 is a Standard grade Carbon Steel. It is composed of (in weight percentage) 0.08-0.13% Carbon (C), 0.30-0.60% Manganese (Mn), 0.04%(max) Phosphorus (P), 0.05%(max) Sulfur (S), and the base metal Iron (Fe). Other designations of AISI 1010 carbon steel include UNS G10100 and AISI 1010.

Steel is the common name for a large family of iron alloys. Steel can either be cast directly to shape, or into ingots which are reheated and hot worked into a wrought shape by forging, extrusion, rolling, or other processes. Wrought steel are the most common engineering material used, and come in a variety of forms with different finishes and properties. Carbon steel alloying elements do not exceed these limits: 1% carbon, 0.6% copper, 1.65% manganese, 0.4% phosphorus, 0.6% silicon, and 0.05% sulfur.

The typical elastic modulus of carbon steel at room temperature (25°C) ranges from 190 to 210 GPa. The typical density of carbon steel is about 7.85 g/cm3. The typical tensile strength varies between 276 and 1882 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions

Sometimes referred to as Shim Stock, Cold Rolled 1010 Steel is oiled to resist rust and stain. Typically utilized in tool and die shops, machine repair and bearing adjustments, Cold Rolled 1010 Steel is rolled to precision tolerances. Cold Rolled 1010 Steel is used in low strength applications. Overall, it has good machinability and can be hardened. It is also suitable for magnet core applications.

Principal Design Features
CS 1010 is a plain carbon steel with a nominal 0.10% carbon content. It is a relatively low strength steel but it may be quenched and tempered for increased strength.

The low carbon steels, such as 1010, are used for applications such as cold headed fasteners and bolts.

Machinability of 1010 steel is fairly good, especially in the cold drawn or cold worked condition. Based upon carbon steel 1112 as a reference that is considered 100% machinable (easily machined) the 1010 steel has a rating of 55%.

Formability of 1010 steel is good. The alloy has good ductility and is readily formed by conventional means.

1010 steel may be welded by all of the standard welding techniques.

Heat Treatment
This steel is generally used in the annealed or case hardened condition. It may be heat treated, quenched and tempered but the cost for so doing is generally not worth the result.

Forging may be done in the range of 2300 F down to 1800 F.

Hot Working
The alloy may be hot worked in the range of 900 F to 200 F.

Cold Working
1010 is easily cold worked by traditional means. Following severe cold working a stress relief, or full, anneal should be performed.

A full anneal is done at 1600 to 1800 F followed by slow cooling in the furnace. A stress relief anneal may be done at 1000 F and slow cooled. In the full annealed condition 1010 steel has a tensile strength of about 45 ksi.

Tempering may be done, after hardening, at 600 to 1100 F depending upon the strength level desired. Tempering at 1000 F will give a tensile strength on the order of 75 ksi.

Hardens by cold working or heat treatment. See "Heat Treatment" and "Tempering".
Chemical Composition
Carbon 0.08 - 0.13
Iron Balance
Manganese 0.3 - 0.6
Phosphorus 0.04 max
Sulphur 0.05 max
Physical Properties
Density (lb / cu. in.) 0.284
Specific Gravity 7.86
Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) 0.107
Melting Point (Deg F) 2760
Poissons Ratio 0.3
Thermal Conductivity 360
Mean Coeff Thermal Expansion 6.7
Modulus of Elasticity Tension 30
Modulus of Elasticity Torsion 11.2

1008 | 1010 | 1015 | 1018 | 1020 | 1025 | 1035 | 1040 | 1045 | 1050 | 1117 | 1141 | 1144 | 12L14 | 1215 | 4140 | 4150 | 4340 | 8620 | A36 | A653 | A513 | Mechanical Properties | Physical Properties | Carbon Steel Pipe Standards | ASTM A53 B Working Pressure | ASTM A106 B Pressure Temperature Rating | Carbon Steel | Steel Alloy Designations | Chemical Composition Analysis of Carbon Steel Table | UNS Number G1 | UNS Number G2 | UNS Number G3 | UNS Number G4 | UNS Number G5 | UNS Number G6 | UNS Number G7

Pipes Tubes Plates Bars Square Tubes Weight Calculation Calculator
Pipe Working Pressure Calculation
Conversion Calculator Calculation-Pressure|Weight|Temperature|Volume|Length
Conversion Table-Pressure|Stress|Mass|Length|Temperature|SI Prelxes
Metals Weight Calculator-Aluminum|Brass|Bronze|Copper|Magnesium|Plastic|Nickel|Stainless Steel|Steel|Titanium|Zinc

Share TubingChina.com All Rights Reserved

Directory | Standard | Heat | Heat Exchanger | Temperature | Pressure | Corrosion | Hardness | Surface | Properties | Selection of Stainless Steel | Contact US

Useful Tools:

Metals weight Calculator
Stainless Steel Weight Calculator
Nickel Alloy Tubing Weight Calculator
Sheet Plate Weight Calculator
Hardness Values Conversion Calculator
Hardness Conversion Calculator
Length Weight Temperature Volume Pressure Conversion
Pipe Working Pressure Calculation
Pressure Conversion Converter Calculator
Gauge Sizes - Wire Sheet Plate Tube
Stainless Steel Pipe Schdule
Nominal Pipe Size
ANSI Pipe Chart

Stainless Steel Tubing and Pipe:

Heat Exchanger Tubes
U Bend Stainless Steel Tubing
Duplex Stainless Steel Pipe
Boiler Tubes, Condenser Tubes
Stainless Steel Seamless Pipes Corrugated Seamless Stainless Steel Pipe Tube
Cold Drawn Bright Annealing Stainless Steel Tubes
Heat resistant Stainless Steel Tubes
Welded Stainless Steel Pipe
Corrosion Resistant Stainless Steel Tube
Corrosion Resistance of Stainless Steel Tubes
Nickel Alloy Seamless Tubes:

UNS N08020 2.4600 Nickel Alloy 20 Seamless Tubing
UNS N02200 2.4066 200 Nickel Alloy Seamless Tubing
UNS N04400 400 Nickel Alloy 2.4360 Nickel Alloy Tubing
UNS N08800 800 Nickel Alloy Seamless Tubes
UNS N08810 800H UNS N08810 Nickel Alloy Seamless Tubes
UNS N08811 800HT Nickel Alloy Seamless Tubes
UNS N08825 825 2.4858 Nickel Alloy Seamless Tubes
UNS N06600 600 2.4816 Nickel Alloy Seamless Tubes
UNS N06625 625 2.4856 Nickel Alloy Seamless Tubes
UNS N10276 C-276 2.4819 Nickel Alloy Seamless Tubing
Why Choose Donghao Steel?

Production Equipment
Testing Equipement
Qualification and Certificates
Quality Control Systerm
Service Range and Procedure

Contact With US:
Tel: +86-159-61185386
Fax: +86-510-86982929