Inconel Tubing Inconel Alloy Tubes 600 601 617 625 690 706 718 X750 6020 MA754 783 792 825

Inconel Alloys Synonyms:

Inconel alloy, Nickel chromium alloys, Inconel powder, Inconel seamless tube, Inconel foil, Inconel strip, Inconel sheet, Inconel plate, Inconel bar, Inconel rod, Inconel wire, Inconel 600, Inconel 617, Inconel 690, Inconel 706, Inconel 718 SPF, Inconel X-750, Inconel MA754, Inconel 783, Inconel 792, Inconel 825, Inconel HX, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625, Nicrofer 6020, Inconel 601, Inconel 625, Inconel 706, Inconel 718, Inconel X-750

Inconel Alloys Grades Available:

Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 625 LCF, Inconel 706, Inconel 718, Inconel 718 SPF, Inconel X-750, Inconel MA754, Inconel 783, Inconel 792, Inconel HX

Inconel General Description:

Nickel hromium alloys. The twelve or so different Inconel® alloys have good resistance to oxidation, reducing environments, corrosive environments, high temperature environments, cryogenic temperature, relaxation resistance and good mechanical properties.

Inconel Alloy Specification:

ASME SB163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

ASME SB165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

ASME SB167 Standard Specification for Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube

ASME SB407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

ASME SB423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

ASME SB444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

ASME SB622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

ASME SB668 UNS N08028 Seamless Pipe and Tube

ASME SB690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

ASME SB729 Standard Specification for seamless UNS N08020, UNS N08026, and UNS N08024 nickel alloy pipe and Tube

Inconel Chemical Composition:

Different Inconels have widely varying compositions, but all are predominantly nickel, with chromium as the second element.Inconel Alloy Chemical Composition Element (Typical % by mass)

Inconel	Ni	Cr	Iron	Mo	Nb	Co	Mn	Cu	Al	Ti	Si	C	S	P	Boron
600 N06600	72.0	14.0-17.0	6.0-10.0				1.0	0.5			0.5	0.15	0.015
625 N06625	58.0	20.0-23.0	5.0	8.0-10.0	3.15 -4.15	1.0	0.5		0.4	0.4	0.5	0.1	0.015	0.015
718 N07718	50.0-55.0	17.0-21.0	balance	2.8-3.3	4.75 -5.5	1.0	0.35	0.2-0.8	0.65-1.15	0.3	0.35	0.08	0.015	0.015	0.006

Inconel Alloys Physical Characteristics Available:

Powder, Foil, Strip, Sheet, Plate, Bar, Wire, Seamless tube and Wire to your specificationInconel Alloys Typical Applications:

Furnace muffles, electronic components, heat treating equipment, steam generator tubing, heat exchangers, radiant tubes, aircraft engine parts, spray bars, nuclear reactors, hot extrusion tooling, bolts, etc.Inconel Trademark Acknowledgement:

Inconel is the registered trademark of the Special Metals Corporation