Stainless Steel Hydraulic Tubing
ASTM A213 A269 304L 316L 316Ti 321 Stainless Steel Hydraulic Tubing Manufacturer
Stainless Steel Hydraulic Tubing | Stainless Steel Hydraulic Tubing Specifications | Hydraulic Precision Tubes Pipes and Hydraulic Hoses | Hydrostatic Test Pressure Flange Fittings | Stainless Steel Instrumentation Tubing
Stainless Steel Hydraulic Tubing, selected prime raw materials, finished in cold drawn or cold rolled, tight tolerance in Outside Diameter and Inside Diameter, clean and smooth surface on inside and outside surface. Withstand high pressure, no deformation after cold bending, no crack and break after flattening and flaring.
Stainless Steel Hydraulic Tubing Specifications:
- EN 10216-5 TC1
- ASTM A213-AWT (Average Wall Thickness)
- ASTM A269
- PED 2014/68/EU
- OD < 6 mm according to ASTM A632
- NACE MR0175/ISO 15156 Available materials widely used in the following fields: Hydraulic and instrumentations Precision mechanical engineering Automotive Industries.
| Grade EN / ASTM TP / UNS | Sizes | Tolerances | Testing |
| 1.4307 | Not standardized; Some sizes acc. to EN ISO 1127 | EN ISO 1127 | DIN 17458 TC1; Corrosion test acc. to. DIN 50914 SS 219711, Condition 22 ASTM A213/A269/A450 |
| 1.4362 | Not standardized; Some sizes acc. to EN ISO 1127 | EN ISO 1127 | ASTM A789/A450 NGS 1607 (SS219713) |
| 1.4435, ø 3 mm | Not standardized | ASTM A632 | ASTM A632 |
| 1.4435 ø 6-80 mm | Not standardized; Some sizes acc. to EN ISO 1127 | EN ISO 1127 | DIN 17458 TC1; Corrosion test acc. to. DIN 50914 SS 219711, Condition 22 ASTM A213/ A269 /A450 |
| 1.4541 | DIN 2462 (DIN 2391) / EN ISO 1127 | DIN 2642 / EN ISO 1127 | DIN 17458 TC1 Corrosion test acc. to. DIN 50914 |
| 1.4571,ø 3 mm | Not standardized | ASTM A632 | DIN 17458 TC1 Corrosion test acc. to. DIN 50914 |
| 1.4571/ 316Ti, ø 6-80 mm | DIN 2462 (DIN 2391) / EN ISO 1127 | DIN 2642 / EN ISO 1127 | DIN 17458 TC1 Corrosion test acc. to. DIN 50914 |
Stainless Steel Hydraulic Tubing Tolerance:
- Standard
- OD(mm)
- WT(mm)
- ASTM A269
- < 38.1 ± 0.13mm
- OD/AD < 12.7 mm +/- 15%
- 38.1-88.9 ± 0.25mm
- OD/AD ≥12.7 mm+/- 10%
- EN 10216-5
- D2 ± 1.0 % / ± 0.5 mm
- T2 ± 12.5 % /± 0.4 mm
- D 3 ± 0.75 % /± 0.3 mm
- T3 ±10 % /± 0.2 mm
- D4 ± 0.5 % /± 0.1 mm
- T4 ± 7.5 % /± 0.15 mm
- DIN 2391-1
- 6-30 mm +/- 0,08mm
- +/- 10%
- GB 14976-2
- (6-10) ± 0.2 mm
- (0.5-1.0)± 0.15mm
- (10-30) ± 0.3mm
- (1.0-3.0) ± 14%
- (30-50) ± 0.4mm
- ≥ 3 +12%/-10%
Stainless Steel Hydraulic Tubing
Stainless Steel Hydraulic Tubing Specifications
Hydraulic Precision Tubes Pipes and Hydraulic Hoses
Hydrostatic Test Pressure Flange Fittings
Stainless Steel Instrumentation Tubing
1/4 Stainless Steel Tubing
3/8 Stainless Steel Tubing
1/2 Stainless Steel Tubing