TP317L Stainless Steel Tube | ASTM A213 TP317L | ASME SA213 TP317L
Guanyu Tube is Specialized Manufacturer of ASTM A213 TP317L 317LMN S31700 S31703 Stainless Steel Tube, ASTM A312 SA 312 TP 317L Stainless Steel pipe. EN 10216-5 1.4439 EN 10217-7 1.4438 317L Pipe, TP317L Stainless Steel Pipe, TP317L Stainless Steel Tube, 317L Tube, TP 317L Stainless Steel Tube, TP 317L Stainless Steel Pipe Supplier, TP317L Stainless Steel Tube Manufacturer.
- TP317L Stainless Steel Tubing and Tubes Properties and Character
- TP317L Stainless Steel Tubing Tubes Sizes
- ASME SA 213 317L Chemical Composition
- TP317L Stainless Steel Mechanical Properties
- TP317L Stainless Steel Physical Properties
- TP317L Stainless Steel Tubing Standard Specifications
- TP317L Stainless Steel Tubes and Pipes Applications
- Maximum internal pressure of 317L Stainless Steel Tubing
- TP317L Stainless Steel Pipe Marking and Packing
- TP317L Stainless Steel Tube Exported Countries
- TP317L Stainless Steel Tubes Related Links
TP317L Stainless Steel Tubing and Tubes Properties and Character
TP317L Stainless Steel is a molybdenum-bearing austenitic stainless steel with greatly increased resistance to chemical attack as compared to the conventional chromium-nickel austenitic stainless steel such as Alloy 304 and 316L. In addition, Alloy 317L offers higher creep, stress-to-rupture, and tensile strength at elevated temperature than normal stainless steels. 317L is a low carbon “L” grade which provides resistance to sensitization during welding and other thermal processes.
TP317L Stainless Steel is a low carbon version of 317 stainless steel. It possesses the same high strength and corrosion resistance and will produce stronger welds due to its low carbon content. 317L is similar to 316L stainless steel but provides improved resistance to atmospheric corrosion, to many organic and inorganic acids and to food and beverages. 317L’s molybdenum content increases to 3 to 4% from the 2 to 3% in 316 and 316L. Many users are shifting over to this alloy in lieu of 304 and 316 as availability and cost improves.
Molybdenum-bearing austenitic stainless steel which are more resistant to general corrosion and pitting corrosion and crevice corrosion than the normal chromium-nickel austenitic steel. 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.
TP317L Stainless Steel Properties:
- Molybdenum bearing austenitic chromium nickel steel with an alloy content somewhat higher than the 316L grades.
- Superior corrosion resistance in difficult environments.
- Higher creep, stress-to-rupture and tensile strengths than other stainless steel.
- Reduced intergranular precipitation of chromium carbides during welding and stress relieving as well as minimized possibility of corrosion failure from intergranular attack due to low carbon content.
- Resistance to pitting corrosion and crevice corrosion making 317L a successful life-cost product in a variety of highly corrosive environments.
Chemical Composition of ASTM A213 / ASME SA 213 TP317 TP317L 317LM 317LMN Stainless Steel
| Grade | C | Mn | P | Sulphur | Si | Cr | Nickel | Mo | N | Cu | Weight % |
| 317 S31700 | 18.00 | 11.00 | 3.00 | Min. | |||||||
| 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 20.00 | 15.00 | 4.00 | Max. | |||
| 317L S31703 | 18.00 | 11.00 | 3.00 | Min. | |||||||
| 0.035 | 2.00 | 0.045 | 0.030 | 1.00 | 20.00 | 15.00 | 4.00 | Max. | |||
| 317LM S31725 | 18.00 | 13.50 | 4.00 | Min. | |||||||
| 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 20.00 | 17.50 | 5.00 | 0.20 | 0.75 | Max | |
| 317LMN S31726 | 17.00 | 13.50 | 4.00 | 0.10 | Min. | ||||||
| 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 20.00 | 17.50 | 5.00 | 0.20 | 0.75 | Max. | |
| EN 10216-5 1.4439 | 16.50 | 12.50 | 4.00 | Min. | |||||||
| 0.030 | 2.00 | 0.040 | 0.015 | 1.00 | 18.50 | 14.50 | 5.00 | Max. | |||
| EN 10217-7 1.4438 | 17.50 | 13.00 | 3.00 | Min. | |||||||
| 0.030 | 2.00 | 0.045 | 0.030 | 1.00 | 19.50 | 16.00 | 4.00 | Max. |
Mechanical Properties of TP317 TP317L Stainless Steel Tubes
| Tensile Strength | Tensile Strength | Yield Strength | Yield Strength | ||||||
| Alloy | UNS Designation | MPa | ksi | ksi | MPa | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness HRB | |
| 317 | S31700 | A213 A312 | 515 | 75 | 30 | 205 | 34 | — | 192 HRB |
| 317L | S31703 | A213, A312 | 515 | 75 | 30 | 205 | 35 | — | 192 HRB |
TP317 TP317L Stainless Steel Physical Properties
| Alloy | UNS Designation | Density Specific Gravity kg/dm³ | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion (IN./IN./°F x 10-6) | Thermal Condu ctivity (BTU-in/ft2-h-°F) | |
| 317 | S31700 | A213 A312 | 7.98 | 28.0 | 9.2 | 116 |
| 317L | S31703 | A213, A312 | 7.98 | 28.0 | 9.2 | 116 |
317LMN Dens317L Stainless Steel Density Specific Gravity: 7.98 (kg/dm³), 317LMN Density 8.00 (kg/dm³).
TP317L Stainless Steel Application
- Flue gas desulfurization scrubber system
- Chemical and Petro-chemical industries
- Pulp and Paper Handling Equipment
- Food Equipment
- Textile equipment
TP317L Stainless Steel Standard Specification
| Alloy | UNS Designation | Werkstoff NR. | Specifications* |
| 317 | S31700 | — | A269, A/SA249, A/SA312 |
| 317L | S31703 | EN 10216-5 1.4438 | A269, A/SA249, A/SA312 |
| 317LM | S31725 | — | A269, A/SA249, A/SA312 |
| 317LMN | S31726 | A269, A/SA249, A/SA312 |
| China – GB | China – GB | Japan | USA | USA | KS | EN/DIN | AS | CNS | DIN |
| Grade | GB24511 | JIS | ASTM | ASTM | – | – | – | – | Grade |
| S31708 | 06Cr19Ni13Mo3 | SUS317 | 317 | S31700 | STS317 | 317 | 317 | X5CrNiMo1713 | |
| S31703 | 022Cr19Ni13Mo3 | SUS317L | 317L | S31703 | STS317L | 1.4439 | 317L | 317L | X2CrNiMo18-15-4 |
| Sizes | Sizes | Sizes | Standard Tolerances | Tolerances | Tolerances | ||
| Products | OD | Walle | Lengths and/or coils | Grades | OD | Wall | Lengths |
| Austenitic Steel Boiler, Super Heater, Heat-Exchanger & Condenser Tube Specifications: ASTM A213, ASME SA 213, ASTM A269, ASTM A312 ASME SA 312 ASTM-A688, ASME-SA688 | 1/4″ (6mm) to 12 ” (323.85 mm) Metric sizes available | 0.020″ (0.51 mm) to 1.312 ” (33.325 mm) | Random or cut lengths up to Customer Requirement | 317/317L | – | ±10% | – |
| Pressure & Corrosion Tubing Meets or exceeds requirements for welded Specifications: ASTM A269, ASTM-A1016, and ASTM-A632 | 1/16″ (1.59 mm) to 4″ (101.6 mm) Metric sizes available | 0.010″ (0.25 mm) to 0.220″ (5.59 mm) | Random or cut lengths up to 90′ (27.4 m) Coils to 1-1/2″ OD | 317/317L | <1-1/2″ (38.1 mm) ±0.005″ (0.13 mm) 1-1/2″ (38.1 mm) to 3″ (76.2 mm) ±0.010″ (0.25 mm) 3-1/2″ (88.9 mm) to 4″ (101.6 mm) ±0.015″ (0.38 mm) | ±10% | Randoms up to +2″ (50.8 mm) Cuts +1/8″ (3 mm) -0″ Coils to 80,000′ (24,384 m) |
| Instrumentation Tubing Specifications: ASTM A269 and ASTM A632 | 1/16″ (1.59 mm) to 1/2″ (12.7 mm) Metric sizes available | 0.010″ (0.25 mm) to 0.065″ (1.65 mm) | Random or cut lengths up to 40′ (12.2 m) | 317/317L | ±0.005″ (0.13 mm) | ±10% | Randoms up to +2″ (50.8 mm) Cuts +1/8″ (3 mm) -0″ |
Maximum internal pressure of TP317L Stainless Steel Tube
American standard for Process piping (ASME B31.3 : 2018)
Maximum internal pressure of ASTM A312 TP317L Size: OD 15.88mm WT 1.245mm Wall Thickness Tolerance: ± 10%
| Grade | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Remark |
|---|---|---|---|---|---|---|---|---|
| 100°F | 200°F | 300°F | 400°F | 500°F | 600°F | 700°F | – | |
| TP317L / S31703 | 205 | 205 | 205 | 194 | 181 | 173 | 166 | ASTM A213 TP317L |
Maximum internal pressure of ASTM A312 TP317L Size: OD 15.88mm WT 1.651mm Wall Thickness Tolerance: ± 10%
| Grade | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Remark |
|---|---|---|---|---|---|---|---|---|
| 100°F | 200°F | 300°F | 400°F | 500°F | 600°F | 700°F | – | |
| TP317L / S31703 | 278 | 278 | 278 | 194 | 181 | 173 | 166 | ASME SA213 TP317L |
Maximum internal pressure of ASTM A312 TP317L Size: OD 19.05mm WT 1.651mm Wall Thickness Tolerance: ± 10%
| Grade | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Remark |
|---|---|---|---|---|---|---|---|---|
| 100°F | 200°F | 300°F | 400°F | 500°F | 600°F | 700°F | – | |
| TP317L / S31703 | 229 | 229 | 229 | 216 | 202 | 193 | 185 | ASTM TP317L |
Maximum internal pressure of ASTM A312 TP317L Size: OD 19.05mm WT 2.11mm Wall Thickness Tolerance: ± 10%
| Grade | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Remark |
|---|---|---|---|---|---|---|---|---|
| 100°F | 200°F | 300°F | 400°F | 500°F | 600°F | 700°F | – | |
| TP317L / S31703 | 298 | 298 | 298 | 282 | 264 | 252 | 241 | ASTM TP317L |
Maximum internal pressure of ASTM A312 TP317L Size: OD 25.4mm WT 1.651mm Wall Thickness Tolerance: ± 10%
| Grade | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Remark |
|---|---|---|---|---|---|---|---|---|
| 100°F | 200°F | 300°F | 400°F | 500°F | 600°F | 700°F | – | |
| TP317L / S31703 | 169 | 169 | 169 | 159 | 149 | 142 | 137 | ASTM TP317L |
Maximum internal pressure of ASTM A312 TP317L Size: OD 25.4mm WT 2.11mm Wall Thickness Tolerance: ± 10%
| Grade | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Pressure bar | Remark |
|---|---|---|---|---|---|---|---|---|
| 100°F | 200°F | 300°F | 400°F | 500°F | 600°F | 700°F | – | |
| 317L / S31703 | 219 | 219 | 219 | 207 | 194 | 185 | 177 | ASTM TP317L |
TP317L Stainless Steel Pipe Marking and Packing
TP317L Stainless Steel Tubing Tubes Sizes
| Size:1/4″ × 0.035″ |
| Size:3/8″ × 0.035″ |
| Size:1/2″ × 0.035″ |
| Size:5/8″ × 0.035″ |
| Size:3/4″ × 0.035″ |
| Size:1″ × 0.035″ |
| Size:5/16″ × 0.035″ |
| Size:1/4″ × 0.049″ |
| Size:3/8″ × 0.049″ |
| Size:1/2″ × 0.049″ |
| Size:5/8″ × 0.049″ |
| Size:3/4″ × 0.049″ |
| Size:1″ × 0.049″ |
| Size:1/4″ × 0.065″ |
| Size:3/8″ × 0.065″ |
| Size:1/2″ × 0.065″ |
| Size:5/8″ × 0.065″ |
| Size:3/4″ × 0.065″ |
| Size:1″ × 0.065″ |
| Size:1″ × 0.120″ |
TP317L Stainless Steel Tube Export Countries
| MIDDLE EAST Saudi Arabia Iran Iraq UAE Qatar Bahrain Oman Kuwait Turkey Yemen Syria Jordan Cyprus | AFRICA Nigeria Algeria Angola South Africa Libya Egypt Sudan Equatorial Guinea The Republic Of Congo Gabon NORTH AMERICA USA Canada Mexico Panama Costa Rica Puerto Rica Trinidad And Tobago Jamaica Bahamas Denmark | EUROPE Russia Norway Germany France Italy UK Spain Ukraine Netherland Belgium Greece Czech Republic Portugal Hungary Albania Austria Switzerland Slovakia Finland Ireland Croatia Slovenia Malta | ASIA India Singapore Malaysia Indonesia Thailand Vietnam South Korea Japan Sri Lanka Maldives Bangladesh Mayanmar Taiwan Cambodia SOUTH AMERICA Argentina Bolivia Brazil Chile Venezuela Colombia Ecuador Guyana Paraguay Uruguay |
TP317L Stainless Steel Tubes Related Links
General Properties
Chemical Composition
Resistance to Corrosion
Physical Properties
Mechanical Properties
Oxidation Resistance
Heat Treatment
Fabrication
Welding