Incoloy 800HT Tubing, Alloy 800HT Pipe

N08810-Nickel-Alloy-Seamless-Pipes

Incoloy 800HT Tubing, Alloy 800HT Pipe ASTM B163 B407 ASME SB163 SB407 N08811 EN 10216-5 1.4959 1.4876 Nickel Alloy Seamless Tube Pipe Incoloy 800HT Seamless Tubing  is an austenitic nickel-iron-chromium alloy Characteristic as below:

  • Excellent corrosion resistance in the water media of the extremely high temperature of 500℃.
  • Good stress corrosion resistance
  • Good machining
  • High creep strength
  • Very good resistance to oxidation
  • Good resistance to combustion gases
  • Very good resistance to carburization
  • Good resistance to nitrogen absorption
  • Good structural stability at high temperatures
  • Good weldability

ASTM B163 B407 ASME SB163 SB407 N08811 Nickel Alloy Seamless Tubes Pipes Incoloy 800HT Seamless Tubing can be used at temperatures up to about 1100°C (2010°F). In order to have the best ductility, it should be used above 700°C (1290°F).

800H is face-centered cubic lattice structure. very low carbon centent and increased Ti:C rate,improve the stability of the structure, anti-allergy , and anti-intergranular corrosion. Low temperature annealing of 950℃ ensure the fine grain structure.

ASTM B163 B407 ASME SB163 SB407 N08811 Nickel Alloy Seamless Tubes Pipes Incoloy 800HT Seamless Tubing Corrosion resistance:

800H can not be corroded in many kinds of media. Its high nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition. High Chromium content made it can better resist pitting and crevice corrosion cracking. This alloy can resist nitric acid and organic acid corrosion, but it is not so fine in the sulfuric acid and hydrochloric acid.

UNS N08811 not only good corrosion resistance in both oxidation resistance and non-oxidizing salt, maybe a little pitting in halide, but also very good corrosion resistance property in the mixture of water,smoke, steam,air and carbon dioxide.

UNS N08811 ASME SB163 800H Weight calculation factor:0.0255

Material Grade Comparison Chart:

UNSASTMEN Steel No.EN
N08800 / N08810 / N08811800 / 800H / 800HTEN 10216-5 1.4959 1.4876X8NiCrAlTi32-21

Seamless condenser and heat exchanger tubes: ASTM A213ASTM B163EN 10216-5

Seamless tube and pipe: ASTM A312ASTM B407, EN 10216-5

ASME SB163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

ASME SB165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

ASME SB167 Standard Specification for Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube

ASME SB407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

ASME SB423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

ASME SB444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

ASME SB622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

ASME SB668 UNS N08028 Seamless Pipe and Tube

ASME SB690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

ASME SB729 Standard Specification for seamless UNS N08020, UNS N08026, and UNS N08024 nickel alloy pipe and Tube

 EN 10216-5 Seamless steel tubes for pressure purposes

Incoloy 800HT Specification:

BarPipeSheetStripWireFitting
ASTM B 408 & ASME SB 408
ASTM B 564 & ASME SB 564
ASME Code Case 1325
ASME Code Case 1949
ISO 9723, 9724, 9725, VdTÜV 412 & 434, DIN 17460
EN 10095
ASTM B 163, ASME SB 163
ASTM B 407/B 829, ASME SB 407/SB 829, ASTM B 514/B 775, ASME SB 514/SB 775, ASTM B 515/B 751, ASME SB 515/SB 751, 1325 and 1983, BS 3074NA15, SEW 470, VdTÜV 412 & 434
ISO 6207, DIN 17459
ASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, VdTüV 412 & 434, DIN 17460, EN 10028-7, EN 10095ASTM B 409/B 906, ASME SB 409/SB 906, ASME Code Case 1325, 2339
BS 3072NA15
BS 3073NA15
SEW 470, VdTÜV 412 & 434, DIN 17460, EN 10028-7 & EN 10095
ASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434, AWS A5.11 ENiCrFe-2, AWS A5.14 ERNiCr-3ASTM B366 

ASTM B163 B407 ASME SB163 SB407 N08810 Nickel Alloy Seamless Tubes Pipes Incoloy 800H Seamless Tubing Chemical composition:

Alloy%NiCrFeCMnSiCuSAlTi
UNS N08800
800
Min.3019      0.150.15
Max.3523balance0.101.510.750.0150.600.60
UNS N08810
800H
Min.3019 0.05    0.150.15
Max.3523balance0.101.510.750.0150.600.60
UNS N08811
800HT
Min.3019 0.06    0.150.15
Max.3523balance0.101.510.750.0150.600.60
Stainless-Steel-Tubing-Hydraustatic-Test
Stainlesss-Steel-Pipe-PMI-Testing

Incoloy 800HT Tube Export Countries

MIDDLE EAST 
 Saudi Arabia
  Iran
  Iraq
  UAE
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus
AFRICA
  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA
  USA
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark
EUROPE  
Russia
  Norway
  Germany
  France
  Italy
  UK
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta
ASIA  
India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia
SOUTH AMERICA 
 Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

Related Products