ASTM A789 Duplex Steel Grades Chemical Composition
The steel shall conform to the chemical requirements prescribed in Table 1.
| Designation | C | Mn | P | S | Si | Ni | Cr | Mo | N | Cu | Others |
| S31200 | 0.030 | 2.00 | 0.045 | 0.030 | 1.00 | 5.5–6.5 | 24.0–26.0 | 1.20–2.00 | 0.14–0.20 | . . . | . . . |
| S31260 | 0.030 | 1.00 | 0.030 | 0.030 | 0.75 | 5.5–7.5 | 24.0–26.0 | 2.5–3.5 | 0.10–0.30 | 0.20 –0.80 | W 0.10 –0.50 |
| S31500 | 0.030 | 1.20 –2.00 | 0.030 | 0.030 | 1.40 –2.00 | 4.3–5.2 | 18.0–19.0 | 2.50–3.00 | 0.05–0.1 | . . . | . . . |
| S31803 | 0.030 | 2.00 | 0.030 | 0.020 | 1.00 | 4.5–6.5 | 21.0–23.0 | 2.5–3.5 | 0.08–0.20 | . . . | . . . |
| S32001 | 0.030 | 4.00 –6.00 | 0.040 | 0.030 | 1.00 | 1.0–3.0 | 19.5–21.5 | 0.60 | 0.05–0.17 | 1.00 | . . . |
| S32003 | 0.030 | 2.00 | 0.030 | 0.020 | 1.00 | 3.0-4.0 | 19.5-22.5 | 1.50-2.00 | 0.14-0.20 | . . . | . . . |
| S32101 | 0.040 | 4.0-6.0 | 0.040 | 0.030 | 1.00 | 1.35-1.70 | 21.0-22.0 | 0.10-0.80 | 0.20-0.25 | 0.10 -0.80 | . . . |
| S32202 | 0.030 | 2.00 | 0.040 | 0.010 | 1.00 | 1.00–2.80 | 21.5–24.0 | 0.45 | 0.18–0.26 | . . . | . . . |
| S32205 | 0.030 | 2.00 | 0.030 | 0.020 | 1.00 | 4.5–6.5 | 22.0–23.0 | 3.0–3.5 | 0.14–0.20 | . . . | . . . |
| S32304 | 0.030 | 2.50 | 0.040 | 0.040 | 1.00 | 3.0–5.5 | 21.5–24.5 | 0.05–0.60 | 0.05–0.20 | 0.05 –0.60 | . . . |
| S32506 | 0.030 | 1.00 | 0.040 | 0.015 | 0.90 | 5.5–7.2 | 24.0–26.0 | 3.0–3.5 | 0.08–0.20 | . . . | W 0.05 –0.30 |
| S32520 | 0.030 | 1.50 | 0.035 | 0.020 | 0.80 | 5.5–8.0 | 23.0–25.0 | 3.–5. | 0.20–0.35 | 0.50 –3.00 | . . . |
| S32550 | 0.04 | 1.50 | 0.040 | 0.030 | 1.00 | 4.5–6.5 | 24.0–27.0 | 2.9–3.9 | 0.10–0.25 | 1.50 –2.50 | . . . |
| S32707 | 0.030 | 1.50 | 0.035 | 0.010 | 0.50 | 5.5–9.5 | 26.0–29.0 | 4.0–5.0 | 0.30–0.50 | 1.0 max | Co 0.5 –2.0 |
| S32750 | 0.030 | 1.20 | 0.035 | 0.020 | 0.80 | 6.0–8.0 | 24.0–26.0 | 3.0–5.0 | 0.24–0.32 | 0.50 | . . . |
| S32760 | 0.030 | 1.00 | 0.030 | 0.010 | 1.00 | 6.0–8.0 | 24.0–26.0 | 3.0–4.0 | 0.20–0.30 | 0.50 –1.00 | W 0.50 –1.00 |
| S32808 | 0.030 | 1.10 | 0.030 | 0.010 | 0.50 | 7.0–8.2 | 27.0–27.9 | 0.80–1.20 | 0.30–0.40 | . . . | W 2.10 –2.50 |
| S32900 | 0.08 | 1.00 | 0.040 | 0.030 | 0.75 | 2.5–5.0 | 23.0–28.0 | 1.00–2.00 | . . . | . . . | . . . |
| S32906 | 0.030 | 0.80 –1.50 | 0.030 | 0.030 | 0.80 | 5.8–7.5 | 28.0 –30.0 | 1.50–2.60 | 0.30–0.40 | 0.80 | . . . |
| S32950 | 0.030 | 2.00 | 0.035 | 0.010 | 0.60 | 3.5–5.2 | 26.0–29.0 | 1.00–2.50 | 0.15–0.35 | . . . | . . . |
| S33207 | 0.030 | 1.50 | 0.035 | 0.010 | 0.80 | 6.0–9.0 | 29.0–33.0 | 3.0–5.0 | 0.40–0.60 | 1.0 | . . . |
| S39274 | 0.030 | 1.00 | 0.030 | 0.020 | 0.80 | 6.0–8.0 | 24.0–26.0 | 2.5–3.5 | 0.24–0.32 | 0.20 –0.80 | W 1.50 –2.50 |
| S39277 | 0.025 | 0.80 | 0.025 | 0.002 | 0.80 | 6.5–8.0 | 24.0–26.0 | 3.00–4.00 | 0.23–0.33 | 1.20 –2.00 | W 0.80 –1.21 |
| S82011 | 0.030 | 2.0 –3.0 | 0.040 | 0.020 | 1.00 | 1.00–2.00 | 20.5–23.5 | 0.10–1.00 | 0.15–0.27 | 0.50 | . . . |
| S82441 | 0.030 | 2.50 –4.00 | 0.035 | 0.005 | 0.70 | 3.0–4.5 | 23.0–25.0 | 1.00–2.00 | 0.20–0.30 | 0.10 –0.80 |
A Maximum, unless a range or minimum is indicated. Where ellipses (…) appear in this table, there is no minimum and analysis for the element need not be determined or reported.
B Designation established in accordance with Practice E527 and SAE J1086.
C % Cr + 3.3 × % Mo + 16 × % N $ 41.
D % Cr + 3.3 × % Mo + 16 × % N $ 40.
Related References:
1. Duplex Stainless Steel Pipe
2. Duplex Stainless Steel
3. Super-Duplex Stainless Steel
4. Principle of Duplex Stainless Steel
5. How the Austenite Ferrite Balance Achieved
6. Corrosion Resistance of Duplex Stainless Steel
7. Stress Corrosion Cracking SCC of Duplex Stainless Steel
8. Barrier to Using Duplex Stainless Steel
9. Duplex Stainless Steel Grades Comparison Table
10. S32101 | S32205/S31803 | S32304 | S32750 | S32760
11. ASTM A789/A789M
12. ASTM A 790/A 790M
13. Duplex Stainless Steel Pipe
14. Austenitic-Ferritic Stainless Steel Pipe
15. Super-Duplex Stainless Steels and their characteristics
16. 2507 S32750 Duplex Steel Pipe
17. S31803 Stainless Steel Pipe
18. S32304(1.4362) Duplex Steel
19. S32205 Stainless Steel Pipe
20. 1.4462 Stainless Steel Pipe
21. Use of stainless steel under high temperature condition refer table
22. ASTM A789 S31803 Duplex Stainless Steel Pipe
23. ASTM A789 S32205 Duplex Stainless Steel Pipe
24. Duplex Stainless Steel Pipe Specification