1. Tubing ChinaHomepage
  2. Our Products

ASME SA213 TP316L ASTM A213 TP316L Seamless Tubes | ASTM A269 TP316 316/316L Stainless Steel Tubing

                   

ASME SA213 TP316L SS Tube
RFQ

Guanyu Tube is manufacturer of ASME SA213 TP316L, ASTM A269 316 Stainless Steel Tube, ASTM A213 TP316L, ASME SA213 TP316L SS Tubes, ASTM A312 TP316L Stainless Steel SMLS Pipe, 316L U bend Tubes, ASME SA 213 A269 TP316 / 316L EN 10216 – 5 1.4401 / 1.4404 Stainless Steel Tube. A312 TP316L, A213 TP316L, SA213 316L. 316L Stainless Steel is one of the most frequently used stainless steel in Heat Exchanger Tubes.

Guanyu SA213 TP316L Stainless Steel Tubes Advantage

  • 1. Super high cost performance.
  • 2. Stable and reliable quality.
  • 3. Specializing in the production of stainless steel tubes for heat exchangers. Professional because of focus.
  • 4. Can produce ultra-long stainless steel seamless tubes. Maximum Length is 60000mm.
  • 5. Fast delivery time. We have 22 sets cold rolling mills and 5 sets cold drawing machines to ensure rapid completion of production and delivery.
  • 6. Clean internal and external surfaces of stainless steel tubes.
  • 7. Excellent straightness. For customers with special requirements, we will add a straightening step before shipping.

SA213 TP316L Stainless Steel Properties and Character

316 Stainless Steel are Molybdenum-containing austenitic stainless steel. 316L Stainless Steel also offers higher creep, stress-to-rupture, and good tensile strength at elevated temperature. The recommended working temperature range includes -425°F to 1,200°F (-255°C to 605°C). In addition to excellent corrosion resistance and strength properties, 316 and 316L Cr-Ni-Mo stainless steel also provide excellent fabricability and formability.
316 & 316L have similar properties and in certain cases are stocked with Dual Certification （316/316L), where it is concluded that each item has properties and a composition which comply with both stainless steel types.

SA213 TP316L Stainless Steel is an improved version of 304 Stainless Steel, with the addition of molybdenum （2.0 – 3.0%） and higher nickel content （10.0 – 14.0%）. The resultant Chemical composition of 316 gives the stainless steel much increased corrosion resistance in an aggressive environment. Molybdenum makes stainless steel more resistant to pitting corrosion and crevice corrosion in chloride-contaminated media, seawater and acetic acid vapour. The lower rate of general corrosion in a mildly corrosive environment gives the stainless steel good atmospheric corrosion resistance in polluted marine atmosphere, and because of low carbon percentage, can minimizing Intergranular corrosion attack.

When there is a danger of corrosion in the heat affected zones of weldments, the low-carbon variety 316L should be used. 316Ti Stainless Steel, the titanium-stabilised version, is used for its resistance to sensitization during prolonged exposure in the 550 °C-800 °C temperature range.

What does the L mean in 316L?

316L-grades have 0.035% carbon maximum (for 904L stainless steel, it is 0.020% maximum). L-grades are resistant to sensitization in short-term exposures or heat treatment. 316L-grade often have slightly lower (typically 30MPa/5ksi less) minimum tensile strength and yield strength than 316 stainless steel.

ASME SA213 TP 316L Stainless Steel Tubes Pipe Size

OD: 3.175 – 508mm (1/8 – 20 Inch) , WT: 0.50 – 63.5mm (0,02 – 2 1/2 inch), Length: 25000mm Maximum

ASTM A269 TP316 Size:1/4″× 0.035″
ASTM A269 TP316L Size:3/8″ × 0.035″ 
ASTM A269 TP316 Size:1/2″ × 0.035″
ASTM A213 TP316L Size:5/8″ × 0.035″
ASME SA213 TP316L Size:3/4″ × 0.035″
ASME SA213 TP316 Size:1″ × 0.035″
Size:5/16″ × 0.035″
Size:1/4″ × 0.049″
Size:3/8″ × 0.049″
Size:1/2″ × 0.049″
Size:5/8″ × 0.049″ 316 Stainless Steel Tube
Size:3/4″ × 0.049″
ASME SA213 TP316 Size:1″ × 0.049″ 
Size:1/4″ × 0.065″ 
Size:3/8″ × 0.065″ 
Size:1/2″ × 0.065″ 
Size:5/8″ × 0.065″
ASME SA213 TP316L Size:3/4″ × 0.065″
ASME SA213 TP31 Size:1″ × 0.065″
ASME SA213 TP31 Size:1″ × 0.120″ 

ASME SA 213 TP 316L EN 10216-5 1.4401 1.4404 1.4435 1.4436 Chemical Composition 

GradeTP316TP 316LTP316H1.44011.44041.4436
UNS DesignationS31600S31603S31609  
Carbon (C) Max.0.080.0350.04-0.10.070.0300.05
Manganese (Mn) Max.2.002.002.002.002.002.00
Phosphorous (P) Max.0.0450.0450.0450.0400.0400.040
Sulphur (S) Max.0.0300.0300.0300.0150.0150.015
Silicon (Si) Max.1.001.001.001.001.001.00
Chromium (Cr)16.0 – 18.016.0 – 18.016.0 – 18.016.5 – 18.516.5 – 18.516.5-18.5
Nickel (Ni)10.0 – 14.010.0 – 14.010.0 – 14.0/ 11.0 -15.010.0 – 13.010.0 – 13.010.5-13.0
Molybdenum (Mo)2.0 – 3.02.0 – 3.02.0 -3.02.0 – 2.52.0 – 2.52.5-3.0
Nitrogen (N) Max.–––0.110.110.11
Iron (Fe)RemainderRemainderRemainderRemainderRemainderRemainder
Other Elements–––––
* Maximum carbon content of 0.04% acceptable for drawn tubes General Properties

* For ASTM A312 TP316 Nickel Percentage required in 11.0 -14.0%

Mechanical Properties of ASTM A213 TP316L / TP316H Stainless Steel SMLS Pipe in the Annealed Condition

   Tensile StrengthYield Strength     
AlloyUNSSpec.MPaksiksiMPaElongation in 2 inch (min.) %Grain Size Req.Max. Hardness HRB Rockwell
TP316S31600A312515753020535—90 HRB
TP316LS31603A213485702517035—90 HRB
TP316HS31609——————7 or coa
rser		—

One tension test shall be made on a specimen from one tube for lots of not more than 50 tubes. Tension tests shall be made on specimens from two tubes for lots of more than 50 tubes. See 15.2.

  1. ASME SA213 TP316L Hardness Requirements:
    1. The material shall conform to the hardness require- ments given in Table 4. See 15.2.
    2. Brinell, Vickers, or Rockwell hardness tests shall be made on specimens from two tubes from each lot. See 15.2.
  2. ASME SA213 TP316L Flattening Test—One flattening test shall be made on specimens from each end of one finished tube, not the one used for the flaring test, from each lot. See 15.1.
  3. ASME SA213 TP316L Flaring Test—One flaring test shall be made on speci- mens from each end of one finished tube, not the one used for the flattening test, from each lot. See 15.1.
  1. Mechanical property requirements do not apply to tubing smaller than 1⁄8 in. [3.2 mm] in inside diameter or thinner than 0.015 in. [0.4 mm] in thickness.

Physical Properties of ASTM A213 TP 316 / 316L / 316H Stainless Steel

AlloyUNSSpec.Density Specific Gravity
kg/dm³		Modulus of Elasticity
(x106 psi)		Mean Coeff
icient of Thermal Expansion (IN./IN
./°F x 10-6)		Thermal Cond
uctivity
(BTU-in/ft2-h-°F)
316S31600A3127.98 28.09.2116
316LS31603A2137.98 28.09.2116
316HS31609—7.98 ———
Weight calculation coefficient: 0.02507

ASTM A269 TP316 Stainless Steel Tubing Standard Specifications:

  • ASTM/ASME: UNS S31600 / S31603
  • EURONORM: X1 CrNiMo 17 12 2 / X3 CrNiMo 17 12 2
  • AFNOR: Z 6 CND 17-11 / Z 2 CND 17-12
  • DIN: 1.4401 / 1.4404
AlloyUNS DesignationWerkstoff NR.Specifications
316S31600EN 10216 – 5 1.4401A269, A/SA249, A/SA312, A1016, A632, A/SA688
316L S31603EN 10216 – 5 1.4404A269, A/SA249, A/SA312, A1016, A632, A/SA688
Standard Specification:EN 10216-5, DIN 17456, DIN 17458, DIN 2462, DIN 17455
GB/T14975, T14976, T13296, GB5310;
ASTM A213, A269, A312, A511, A789, A790, A928, A999, A1016, ASTM B161, ASTM B163, ASTM B165, ASTM B167, ASTM B338, ASTM B407, ASTM B423, ASTM B444,ASTM B619, ASTM B622, ASTM B626, ASTM B668, ASTM B677, ASTM B829
JIS G3459, JIS G3463, JIS G3446, JIS G3447, JIS G3448, JIS G3468
GOST 9940, GOST 9941;
 SizesSizesSizes Standard TolerancesTolerancesTolerances
ProductsODWallLengths and/or coilsGradesODWallLengths
Seamless Austenitic Steel Boiler, Superheater, 
Heat Exchanger Tube & Condenser Tubes Specifications: ASTM A213, ASME-SA213, ASTM-A688, ASME-SA688, ASTM A312, ASME SA 312		0.5″ (6 mm) to 12 ” (323.85 mm)Metric sizes available 0.020″ (0.51 mm) to 1.312 ” (33.325 mm)Random or cut lengths to Customer Requirement316/316LUnder 1″ (25.4 mm) ±0.004″ (0.10 mm)1″ (25.4 mm) to 1-1/2″ (38.1 mm) ±0.006″ (0.15 mm)>1-1/2″ (38.1 mm) to 2″ (50.8 mm) ±0.008″ (0.20 mm)>2″ (50.8 mm) to 2-1/2″ (63.5 mm) ±0.010″ (0.25 mm)>2-1/2″ (63.5 mm) to 3″ (76.2 mm) ±0.012″ (0.30 mm)3″ (76.2 mm) to 4″ (101.6 mm) ±0.015″ (0.38 mm)±10%Randoms up to +2″ (50.8 mm)Cuts +1/8″ (3 mm) -0″Coils to 80,000′ (24,384 m)
Pressure & Corrosion Stainless steel Tube Meets or exceeds requirements for welded Specifications: 
ASTM-A269, ASTM-A1016, and ASTM-A632		1/16″ (1.59 mm) to 4″ (101.6 mm)Metric sizes available0.010″ (0.25 mm) to 0.220″ (5.59 mm)Random or cut lengths up to 90′ (27.4 m)Coils to 1-1/2″ OD316/316L<1-1/2″ (38.1 mm) ±0.005″ (0.13 mm) 1-1/2″ (38.1 mm) to 3″ (76.2 mm) ±0.010″ (0.25 mm)3-1/2″ (88.9 mm) to 4″ (101.6 mm) ±0.015″ (0.38 mm)±10%Randoms up to +2″ (50.8 mm)
Cuts +1/8″ (3 mm) -0″
Coils to 80,000′ (24,384 m)
Beverage Tubing1/4″(6.35 mm) 5/16″ (7.94 mm) 3/8″ (9.53 mm) 1/2″ (12.7 mm)Metric sizes available0.020″ (0.51 mm) to 0.028″ (0.71 mm)Random or cut lengths up to 40′ (12.2 m)316L±0.005″ (0.13 mm)±10%Randoms up to +2″ (50.8 mm)
Cuts +1/8″ (3 mm) -0″
Coils to 15,000′ (4,572 m)
Instrumentation Tubing Specifications: ASTM-A269 and ASTM-A6321/16″ (1.59 mm) to 1/2″ (12.7 mm)Metric sizes available0.010″ (0.25 mm) to 0.065″ (1.65 mm)Random or cut lengths up to 40′ (12.2 m)316/316L±0.005″ (0.13 mm)±10%Randoms up to +2″ (50.8 mm)
Cuts +1/8″ (3 mm) -0″
Food/Dairy Tubing, Pharmaceutical/ BioPharmaceutical Tubing, High Purity Tubing, Ultra High
Purity Tubing		1/2″ (12.7 mm) to 8″ (203.2 mm)0.049″ (1.24 mm) to 0.109″ (2.77 mm)20′ (6.1 m) stock lengths. Other lengths available upon request.316/316L1/2″ (12.7 mm) ± 0.005″ (0.13 mm) 3/4″ (19.1 mm) ± 0.005″ (0.13 mm) 1″ (25.4 mm) ± 0.005″ (0.13 mm) 1-1/2″ (38.1 mm) ± 0.008″ (0.20 mm) 2″ (50.8 mm) ± 0.008″ (0.20 mm) 2-1/2″ (63.5 mm) ± 0.010″ (0.25 mm) 3″ (76.2 mm) ± 0.010″ (0.25 mm) 4″ (101.6 mm) ± 0.015″ (0.38 mm) 6″ (152.4 mm) ± 0.030″ (0.76 mm) 8″ (203.2 mm) +0.061″ (1.55 mm), -0.031″ (0.79 mm)±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%		+1/8″ (3 mm) -0″
+1/8″ (3 mm) -0″
+1/8″ (3 mm) -0″
+1/8″ (3 mm) -0″
+1/8″ (3 mm) -0″
+1/8″ (3 mm) -0″
+1/8″ (3 mm) -0″
+1/8″ (3 mm) -0″
+1″ (25.4 mm) -0″
+1″ (25.4 mm) -0

Permissible Variations from the Specified Wall Thickness

Permissible variations from the specified minimum wall thickness shall be in accordance with Specification A1016/A1016M.

Permissible variations from the specified average wall thickness shall be 10 % of the specified average wall thickness for cold formed tubes and, unless otherwise specified by the purchaser, shall be in accordance with Table 6 for hot formed tubes.

ASME SA213 Stainless Steel Tubes Heat Treatment

GradeUNSHeat Treatment TypeAustenitizing/ Solutioning Temperature, min or range °F [°C] and Cooling MediaASTM Grain Size No. B
XM-19
TP310MoLN		S20910 S21500 S25700 S31050solution treatment solution treatment solution treatment solution treatment1900 [1040]F water or other rapid cool 1900 [1040]F,G water or other rapid cool 1900 [1040]F water or other rapid cool1900 [1040]F water or other rapid cool{{{{{{{{
TP304S30400solution treatment1900 [1040]F water or other rapid cool{{
TP304LS30403solution treatment1900 [1040]F water or other rapid cool{{
TP304HS30409S30432solution treatmentsolution treatment1900 [1040] water or other rapid cool2000 [1100]F water or other rapid cool{{7{
TP304NS30434S30451solution treatmentsolution treatment2120 [1160] water or other rapid cool1900 [1040]F water or other rapid cool{{{{
TP304LNS30453 S30615solution treatment solution treatment1900 [1040]F water or other rapid cool1900 [1040]F water or other rapid cool{{{{
S30815solution treatment1920 [1050] water or other rapid cool{{
TP309SS30908solution treatment1900 [1040]Fwater or other rapid cool{{
TP309HS30909solution treatment1900 [1040]water or other rapid cool{7
TP309LMoNS30925solution treatment1920 [1050]water or other rapid cool{7
TP309CbS30940solution treatment1900 [1040]Fwater or other rapid cool{{
TP309HCbS30941solution treatment1900 [1040]Hwater or other rapid cool{7
S30942S31002solution treatmentsolution treatment2120 [1160]1900 [1040]Fwater or other rapid coolwater or other rapid cool
{		6{
TP310SS31008solution treatment1900 [1040]Fwater or other rapid cool{{
TP310HS31009solution treatment1900 [1040]water or other rapid cool{7
TP310MoCbNS31025solution treatment2100 [1150]water or other rapid cool{7
S31035solution treatment2160–2280water or other rapid cool{7

TP310Cb
S31040
solution treatment		[1180–1250]1900 [1040]F
water or other rapid cool
{
{
TP310HCbS31041solution treatment1900 [1040]Hwater or other rapid cool{7
TP310HCbNS31042solution treatment1900 [1040]F,Hwater or other rapid cool{7
S31060solution treatment1975–2160[1080–1180]Fwater or other rapid cool{7
S31254solution treatment2100 [1150]water or other rapid cool{{
S31266solution treatment2100 [1150]water or other rapid cool{{
S31272solution treatment1920 [1050]water or other rapid cool{{
S31277solution treatment2050 [1120]Fwater or other rapid cool{{
TP316S31600solution treatment1900 [1040]Fwater or other rapid cool{{
TP316LS31603solution treatment1900 [1040]Fwater or other rapid cool{{
TP316HS31609solution treatment1900 [1040]water or other rapid cool{7
TP316TiS31635solution treatment1900 [1040]water or other rapid cool{{
TP316NS31651solution treatment1900 [1040]Fwater or other rapid cool{{
TP316LNS31653solution treatment1900 [1040]Fwater or other rapid cool{{
TP317S31700solution treatment1900 [1040]Fwater or other rapid cool{{
TP317LS31703solution treatment1900 [1040]Fwater or other rapid cool{{
S31725solution treatment1900 [1040]Fwater or other rapid cool{{
S32050solution treatment2100 [1150]Fwater or other rapid cool{{
TP321S32100solution treatment1900 [1040]F,Hwater or other rapid cool{{
TP321HS32109solution treatmentcold worked:water or other rapid cool{7
2000 [1090]

S32615
solution treatment		hot rolled: 1925 [1050]H1900 [1040]F
water or other rapid cool
{
3 or finer
S32716solution treatment1900 [1040]Fwater or other rapid cool{{
S33228solution treatment2050 [1120]water or other rapid cool{{
S34565solution treatment2050–2140water or other rapid cool{{

TP347
S34700
solution treatment		[1120–1170]1900 [1040]F,H
water or other rapid cool
{
{
TP347WS34705solution treatment2000 [1100]water or other rapid cool{7-10
TP347HS34709solution treatmentcold worked:water or other rapid cool{7
2000 [1100]

TP347HFG
S34710
solution treatment,I		hot rolled: 1925 [1050]H2150 [1175]F
water or other rapid cool
{
7-10
TP347LNS34751solution treatment1900 [1040]Fwater or other rapid cool{{
TP348S34800solution treatment1900 [1040]F,Hwater or other rapid cool{{
TP348HS34809solution treatmentcold worked:water or other rapid cool{7
2000 [1100]

S35045
solution treatment		hot rolled: 1925 [1050]H2000 [1100]F
still air cool or faster
{
{
XM-15S38100solution treatment1900 [1040]Fwater or other rapid cool{{
S38815solution treatment1950 [1065]Fwater or other rapid cool{{
Alloy 20N08020
N08367		stabilization treatmentsolution treatment1700-1850F [925-1010]2025 [1105]Fwater or other rapid cool
water or other rapid cool		{
{		{
{
800N08800solution treatment1900 [1040]Fwater or other rapid cool{{
800HN08810solution treatment2050 [1120]Fwater or other rapid cool{5
N08811solution treatment2100 [1150]Fwater or other rapid cool{5
N08904solution treatment2000 [1100]Fwater or other rapid cool{{
N08925solution treatment2010–2100water or other rapid cool{{
[1100–1150]
N08926solution treatment2010–2100water or other rapid cool{{

ASME SA 213 TP316L Stainless Steel Tubing Applications

316 316L (2.0 – 3.0% Mo) is the most widely used molybdenum-containing stainless steel. It is designated as a tank and stainless steel tube material for food processing and pharmaceutical production. Increased molybdenum content enhances resistance to chloride in the air, so TP316L can be used as a material of choice for offshore and coastal building.

  • Food preparation equipment, especially in chloride environments
  • Chemical processing, equipment
  • Laboratory benches and equipment
  • Rubber, plastics, pulp & paper machinery
  • Pollution control equipment
  • Boat fittings, value and pump trim
  • Heat exchanger Tubes
  • Pharmaceutical and textile industry
  • Condensers, evaporators and tanks
  • 316H Stainless Steel Reheater Tubes and Superheater Tubes for Boiler

Maximum internal pressure of SA213 TP316L Stainless Steel Pipe Tube

316/316L Stainless Steel Tubing Working Pressure

ODmmTube Wall Thickness（mm）
0.81.01.21.51.82.02.22.52.83.03.54.04.55.0
Working Pressure（bar）
3670
6310420540710
8310390520
10240300400510580
12200250330410470
14160200270340380430
15150190250310360400
16170230290330370400
18150200260290320370
20140180230260290330380
22140160200230260300340
25180200230260290320
28180200230260280330
30170180210240260310
32160170200220240290330
38140160190200240270310
42150170190220250290
50150180210240270

American standard for Process piping (ASME B31.3 : 2018)

Maximum internal pressure of ASTM A312 A269 316L Size: OD 12.7 mm WT 0.889mm Wall Thickness Tolerance: ± 10%

GradePressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Remark
 100°F200°F300°F400°F500°F600°F700°F–
316L152152152143135128123A 312 and A 269 tube

Maximum internal pressure of ASTM A312 A269 316L Size: OD 12.7 mm WT 1.245mm Wall Thickness Tolerance: ± 10%

GradePressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Remark
 100°F200°F300°F400°F500°F600°F700°F–
316L217217217204192182175A 312 and A 269 tube

Maximum internal pressure of ASTM A312 A269 316L Size: OD 12.7 mm WT 1.651mm Wall Thickness Tolerance: ± 10%

GradePressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Remark
 100°F200°F300°F400°F500°F600°F700°F–
316L297297297279263249240A 312 and A 269 tube

Maximum internal pressure of ASTM A312 A269 316L Size: OD 15.88mm WT 1.245mm Wall Thickness Tolerance: ± 10%

GradePressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Remark
 100°F200°F300°F400°F500°F600°F700°F–
316L171171171161151143138A 312 and A 269 tube

Maximum internal pressure of ASTM A312 A269 316L Size: OD 15.88mm WT 1.651mm Wall Thickness Tolerance: ± 10%

GradePressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Remark
 100°F200°F300°F400°F500°F600°F700°F–
316L232232232218206195188A 312 and A 269 tube

Maximum internal pressure of ASTM A312 A269 316L Size: OD 19.05mm WT 1.651mm Wall Thickness Tolerance: ± 10%

GradePressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Remark
 100°F200°F300°F400°F500°F600°F700°F–
TP316L191191191179169160154A 312 and A 269 tube

Maximum internal pressure of ASTM A312 A269 316L Size: OD 19.05mm WT 2.11mm Wall Thickness Tolerance: ± 10%

GradePressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Remark
 100°F200°F300°F400°F500°F600°F700°F–
TP316L249249249234221209201A 312 and A 269 tube

Maximum internal pressure of ASTM A312 A269 316L Size: OD 25.4mm WT 1.651mm Wall Thickness Tolerance: ± 10%

GradePressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Remark
 100°F200°F300°F400°F500°F600°F700°F–
316L141141141132125118114A 312 and A 269 tube

Maximum internal pressure of ASTM A312 A269 316L Size: OD 25.4mm WT 2.11mm Wall Thickness Tolerance: ± 10%

GradePressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Pressure
bar		Remark
 100°F200°F300°F400°F500°F600°F700°F–
TP316L183183183172162153148A 312 and A 269 tube

SA213 TP316 TP316L Stainless Steel Tubing Marking and Packing

ASTM A312 TP316L
316L-Stainless-Steel-Tubing
TP316-PMI

SA213 TP316L Stainless Steel Tube Export Record

Export ASME SA213 / A269 TP316 Stainless Steel Seamless Tubes finished in Bright Annealing. Size with Outside Diameter in 14.6mm, Wall Thickness in 1mm Length in 3100mm. Total in 4900KGS.

Export ASME SA213 TP316 Stainless Steel Seamless Tubes finished in Bright Annealing. Size with Outside Diameter in 25.4mm / 1 inch, Wall Thickness in 1.65mm / 0.065″ Length in 6096mm. Total in 4492KGS.

Export ASME SA213 TP316 Stainless Steel Seamless Tubes finished in Bright Annealing. Size with Outside Diameter in 12.7mm / 1/2 inch, Wall Thickness in 1.245mm / 0.049″ Length in 6096mm. Total in 2180KGS.

ASME SA213 TP316L Stainless Steel Tube Export Countries

MIDDLE EAST 
 Saudi Arabia
  Iran
  Iraq
  UAE
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus		AFRICA
  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA
  USA
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark		EUROPE  
Russia
  Norway
  Germany
  France
  Italy
  UK
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta		 ASIA  
China
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia
SOUTH AMERICA 
 Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

Download Guanyu Tube ASME SA213 TP316L Tubes in PDF

pdfGuanyu Tube ASME SA213 TP316L ASTM A269 TP316L

316L Chemical Composition
316L Resistance to Corrosion
316L Physical Properties
316L Mechanical Properties
316L Oxidation Resistance
316L Heat Treatment
316L Fabrication
Comparison Grade 316 316L 316Ti
Difference Between Duplex Steel S31803/S32205 and 316L
Comparison of Composition Ranges of TP316 Stainless Steel
Selection 316L Stainless Steel for High Purity Semiconductor Gas Filter Assemblies

Previous:

Next:

Related Products