Material Comparison Table DIN 1691 1693 and DIN EN 1561
The purchasers and clients in Germany and Austria usually provided us the standard of DIN EN 1561. This is the old standard, and has been replaced by the new standard DIN 1691. However, we should know how to transfer these two standard. The following comparison table will be a good reference for the suppliers and buyers.
DIN 1691 to DIN EN 1561
GG-10 0.6010 EN-GJL-100 EN-JL1010
GG-15 0.6015 EN-GJL-150 EN-JL1020
GG-20 0.6020 EN-GJL-200 EN-JL1030
GG-25 0.6025 EN-GJL-250 EN-JL1040
GG-30 0.6030 EN-GJL-300 EN-JL1050
GG-35 0.6035 EN-GJL-350 EN-JL1060
GG-150 HB 0.6012 EN-GJL-HB155 EN-JL2010
GG-170 HB 0.6017 EN-GJL-HB175 EN-JL2020
GG-190 HB 0.6022 EN-GJL-HB195 EN-JL2030
GG-220 HB 0.6027 EN-GJL-HB215 EN-JL2040
GG-240 HB 0.6032 EN-GJL-HB235 EN-JL2050
GG-260 HB 0.6037 EN-GJL-HB255 EN-JL2060
DIN 1693-1/2 to DIN EN 1563
GGG-35.3 0.7033 EN-GJS-350-22-LT EN-JS1015
GGG-35.3 0.7033 EN-GJS-350-22-RT EN-JS1014
GGG-35.3 0.7033 EN-GJS-350-22 EN-JS1010
GGG-40.3 0.7043 EN-GJS-400-18-LT EN-JS1025
GGG-40.3 0.7043 EN-GJS-400-18-RT EN-JS1024
GGG-40.3 0.7043 EN-GJS-400-18 EN-JS1020
GGG-40 0.7040 EN-GJS-400-15 EN-JS1030
GGG-40 0.7040 EN-GJS-450-10 EN-JS1040
GGG-50 0.7050 EN-GJS-500-7 EN-JS1050
GGG-60 0.7060 EN-GJS-600-3 EN-JS1060
GGG-70 0.7070 EN-GJS-700-2 EN-JS1070
GGG-80 0.7080 EN-GJS-800-2 EN-JS1080
GGG-80 0.7080 EN-GJS-900-2 EN-JS1090
|
