Condenser Tubes

Guanyu Tube is specialized manufacturer of Condenser Tubes in China with reliable quality.

Guanyu Tube has been assessed for approval of its production facility for stainless steel seamless pipes (Tubes). A quality control system established and operated by the company was audited by TUV Rheinland, and found the company has the facilities and capabilities to fabricate the cold finished (Cold-drawing and Rolling) Stainless Steel Seamless Pipes (Tubes) complied with the requirement of the applicable ASME/ASTM material standard of ASME Boiler and Pressure Vessel Code Section II Part A. 

Condenser Tube are normally chosen for steam heating systems, particularly on water and CIP applications with variable temperature conditions or when inlet water or CIP temperature is low, causing thermal shock conditions. The design features a floating tube sheet arrangement to reduce tube stresses. Standard material for tube-side construction is stainless steel tube, making these units ideal for acid or alkali wash systems.

Condenser Tube Widely used in the following fields:
Heat Exchanger, Heater and condenser ,Boiler tubing , Condenser tubing
Condenser Tube Delivery Condition:

Bright Annealed (BA) or Annealed Pickled (AP), or O61 Temper for Copper Alloy Tubes

Condenser Tubes Specification:

ASTM B111 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
ASTM A213/A213M-15 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ASTM A269/A269M-15 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A249 – A249/A249M Specification fors Welded Austenitic Steel Boiler, Superheater, Heat Exchanger, and Condenser Tubes
ASTM A179 – A179/A179M – Specification for Seamless Cold-Drawn Low-Carbon Steel Heat Exchanger Tubes and Condenser Tubes
ASTM A214 – A214/A214M Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A851 – A851 Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes

Condenser Pipe Marking & Packing

Marking according to MPS and Standard
Stainless Steel Tubes Ends with Caps according to PO
In Seaworthy Wooden Cases With Plastic Paper protect
In Plywood Cases With Plastic Paper Protect
Steel Racks Package
Hexagonal packing in Bundles

Copper Alloy Condenser Tubing

Condenser Tube
Advantage of Stainless Steel tube in Condenser
ASTM Standard for Heat-Exchanger and Condenser Tubes
Condenser Tube Specifications
Disadvantage of stainless steel tube in condenser
Large Steam System Condensers