Inconel 601 Tubing, Alloy 601 Tubing
ASTM B163 B167 ASME SB163 SB167 N06601 Inconel 601 Nickel Alloy Seamless Tubes Tubing Pipes
ASTM B163 B167 ASME SB163 SB167 N06601 Inconel 601 Tubing DIN 17552 2.4851 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200 °F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high temperature strength, and retains its ductility after long service exposure.
ASTM B163 B167 ASME SB163 SB167 N06601 Inconel 601 Nickel Alloy Seamless Tubes Tubing Pipes has good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601 2.4851 properties make it a material of broad utility in fields like thermal processing, chemical processing, pollution control, aerospace, and power generation. However, alloy 601 2.4851 is not suggested for use in strongly reducing, sulfur bearing environments.
ASTM B163 B167 ASME SB163 SB167 N06601 Inconel 601 Nickel Alloy Seamless Tubes Tubing Pipes 2.4851 Characteristic as below:
1.Excellent inoxidability in the high temperature.
2.Good resistance to carbonizing.
3.Good inoxidabilitiy in sulfur atmosphere
4.Good mechanical properties in both room temperature and high temperature.
5.Good resistance to stress corrosion cracking, 601 have high creep rupture strength since it limits the carbon content and grain size, so recommend to use for above 500℃ environment.
ASTM B163 B167 ASME SB163 SB167 N06601 Inconel 601 Nickel Alloy Seamless Tubes Tubing Pipes 2.4851 Metallurgical structure: 2.4851 alloy 601 is face-centered cubic lattice structure.
Inconel 601 2.4851 Corrosion resistance: One of the mainly performance of 601 is inexorability in high temperature, even in very inclement conditions. If in the process of heating and cooling cycle, 601 can generate the dense layer of oxide film to get high spalling resistance. 601 have good carbonation resistance. With excellent inoxidability in the high temperature of sulfur atmosphere since it has high chromium and aluminum content.
Inconel 601 Alloy Seamless Tubes Tubing Pipes Chemaical composition:
Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | Al | P | S |
ASTM B163 N06601 | Min. | 58.0 | 21.0 | 1.0 | |||||||
ASTM B163 N06601 | Max. | 63.0 | 25.0 | balance | 0.10 | 1.0 | 0.5 | 1.0 | 1.7 | 0.02 | 0.015 |
Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | Al | P | S |
ASTM B167 N06601 | Min. | 58.0 | 21.0 | 1.0 | |||||||
ASTM B167 N06601 | Max. | 63.0 | 25.0 | balance | 0.10 | 1.5 | 0.5 | 1.0 | 1.7 | 0.02 | 0.015 |
Inconel 601 Alloy Seamless Tubes Tubing Pipes Specification:
Material No. | 2.4851 |
EN symbol (short) | NiCr23Fe |
AISI/SAE | — |
UNS | N06601 |
AFNOR | — |
B.S. | — |
alloy | Alloy 601 |
Registered work’s label | Inconel 601 Tubing, Nicrofer®6023H |
Standards | DIN 17744 17750 17751 17752 17753 |
ASTM Specifications for Inconel 601 Tubing
Pipe Smls | Welded Pipe | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
B167 | B517 | B167 | – | B168 | B166 | B564 | B366 | B166 |
ASME SB163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ASME SB165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
ASME SB167 Standard Specification for Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube
ASME SB407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ASME SB423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube
ASME SB444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
ASME SB622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
ASME SB668 UNS N08028 Seamless Pipe and Tube
ASME SB690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
ASME SB729 Standard Specification for seamless UNS N08020, UNS N08026, and UNS N08024 nickel alloy pipe and Tube
Inconel 601 Alloy Seamless Tubes Tubing Pipes Application:
1.The tray,basket and tool clamp in the heat treatment factory.
2.Steel shares at annealing and radiation control, high-speed gas burners, Industrial furnace silk screen.
3.Separate tank of ammonia reforming and catalytic support grid of nitric acid producing.
4.Exhaust system parts
5.Solid waste incinerator’s combustion chamber
6.Channel support and soot dealing parts.
7.Detoxification exhaust system components
8.Oxygen re-heater
Inconel 601 Alloy Seamless Tubes Tubing Pipes Physical properties
Density / Specific Gravity | 8.11kg/dm³ |
Melting point | 1320-1370 °C |
Inconel 601 Alloy minimum mechanical properties in the room temperature
Alloy state | Tensile strength Rm N/mm² | Yield strength R P0. 2N/mm² | ElongationA 5 % | Brinell hardness HB |
Annealing treatment | 650 | 300 | 30 | – |
Solution treatment | 600 | 240 | 30 | ≤220 |
Inconel 601 Tube Export Countries
MIDDLE EAST Saudi Arabia Iran Iraq UAE Qatar Bahrain Oman Kuwait Turkey Yemen Syria Jordan Cyprus | AFRICA Nigeria Algeria Angola South Africa Libya Egypt Sudan Equatorial Guinea The Republic Of Congo Gabon NORTH AMERICA USA Canada Mexico Panama Costa Rica Puerto Rica Trinidad And Tobago Jamaica Bahamas Denmark | EUROPE Russia Norway Germany France Italy UK Spain Ukraine Netherland Belgium Greece Czech Republic Portugal Hungary Albania Austria Switzerland Slovakia Finland Ireland Croatia Slovenia Malta | ASIA India Singapore Malaysia Indonesia Thailand Vietnam South Korea Japan Sri Lanka Maldives Bangladesh Mayanmar Taiwan Cambodia SOUTH AMERICA Argentina Bolivia Brazil Chile Venezuela Colombia Ecuador Guyana Paraguay Uruguay |