ASTM A199 Standard for Alloy Steel Heat Exchanger Tubes
ASTM A199 covedrs several grades of minimum-wall-thickness, chromium-molybdenum and chromium-molybdenum-silicon, seamless, cold-drawn, intermediate alloy steel tubes for heat exchanger, condensers, and similar heat transfer apparatus.
The tubing sizes usually furnished to this specification are 1/8 to 3 in. [3.2 to 76.2 mm) in outside diameter. Tubing having other dimensions may be furnished provided such tubes comply with all other requirements of this spedification.
Mechanical properties requirements do not apply to tubing smaller than 1/8 in [3.2 mm] in inside diameter or 0.015 in [0.4mm] in thickness.
The values stated in either inch-pound units or SO units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therfore, each system must ve used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.
|