ASTM A587 Standard for ERW Steel Pipe for Chemical Industry
ASTM A587 Standard for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry covers ERW low-carbon steel pipe for use as process lines in chemical industries. The steel shall be aluminum killed steel made by one or more of the following processes: open-hearth, basic-oxygen, or electric-furnace. The steel may be cast in ingots or strand cast and the pipe shall be made by electric resistance welding.
Pipe furnished in the as-welded condition shall be normalized at a temperature above the upper critical temperature. Cold-drawn pipe shall be normalized after the final cold-draw pass. The pipes shall undergo the following tests: tensile test, flattening test, reverse flattening test, flange test and nondestructive tests. The nondestructive tests shall include eddy-current test, ultrasonic test, and flux leakage test.
This specification covers electric-resistance-welded low-carbon steel pipe intended for use as process lines.
Pipe ordered under this specification shall be suitable for severe forming operations involving flanging in all sizes and bending to close radii up to and including NPS 4.
This specification covers NPS 1/2 through 10, plus additional sizes. The corresponding outside diameters and wall thicknesses for NPS 1/2 through 10 are listed in, as are the dimensions for the additional sizes.
Note 1 The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as nominal diameter, size, and nominal size.
TABLE 1 Tolerance for Outside Diameter and Wall Thickness
NPS
Designator |
Outside Diameter |
Wall Thickness |
Min |
Nom |
Max |
Min |
Nom |
Max |
|
Inches |
|
0.8125 ?? 0.004 |
0.095 |
0.103 |
0.111 |
0.129 |
0.140 |
0.151 |
1/2 |
0.840 ?? 0.006 |
0.095 |
0.103 |
0.111 |
0.125 |
0.140 |
0.151 |
3/4 |
1.050 ??0.006 |
0.099 |
0.108 |
0.117 |
0.135 |
0.147 |
0.159 |
|
1.0625 ?? 0.006 |
0.099 |
0.108 |
0.117 |
0.135 |
0.147 |
0.159 |
|
1.3125 ?? 0.006 |
0.116 |
0.126 |
0.136 |
0.157 |
0.171 |
0.185 |
1 |
1.315 ?? 0.006 |
0.116 |
0.126 |
0.136 |
0.157 |
0.171 |
0.185 |
11/4 |
1.660 ?? 0.007 |
0.121 |
0.132 |
0.143 |
0.167 |
0.182 |
0.197 |
??? |
1.875 ?? 0.008 |
0.127 |
0.138 |
0.149 |
0.175 |
0.190 |
0.205 |
11/2 |
1.900 ?? 0.008 |
0.127 |
0.158 |
0.149 |
0.175 |
0.190 |
0.205 |
2 |
2.375 ?? 0.010 |
0.135 |
0.147 |
0.159 |
0.191 |
0.208 |
0.225 |
3 |
3.500 ?? 0.015 |
0.189 |
0.206 |
0.223 |
0.262 |
0.286 |
0.310 |
4 |
4.500 ?? 0.017 |
0.207 |
0.226 |
0.245 |
0.295 |
0.322 |
0.349 |
6 |
6.625 ?? .030 |
0.245 |
0.267 |
0.289 |
0.378 |
0.412 |
0.446 |
8 |
8.625 ?? .040 |
0.282 |
0.308 |
0.334 |
0.438 |
0.478 |
0.518 |
10 |
10.750 ?? .050 |
0.319 |
0.348 |
0.377 |
0.520 |
0.567 |
0.614 |
|
Millimetres |
??? |
20.64 ?? 0.10 |
2.41 |
2.62 |
2.82 |
3.28 |
3.56 |
3.84 |
1/2 |
21.30 ?? 0.15 |
2.41 |
2.62 |
2.82 |
3.28 |
3.56 |
3.84 |
3/4 |
26.70 ?? 0.15 |
2.51 |
2.74 |
2.97 |
3.43 |
3.73 |
4.04 |
??? |
26.99 ?? 0.15 |
2.51 |
2.74 |
2.97 |
3.43 |
3.73 |
4.04 |
??? |
33.34 ?? 0.15 |
2.95 |
3.20 |
3.45 |
3.99 |
4.34 |
4.70 |
1 |
33.40 ?? 0.15 |
2.95 |
3.20 |
3.45 |
3.99 |
4.34 |
4.70 |
11/4 |
42.16 ?? 0.18 |
3.07 |
3.35 |
3.63 |
4.24 |
4.62 |
5.00 |
??? |
47.63 ?? 0.20 |
3.22 |
3.51 |
3.78 |
4.45 |
4.83 |
5.21 |
11/2 |
48.30 ?? 0.020 |
3.22 |
3.51 |
3.78 |
4.45 |
4.83 |
5.21 |
2 |
60.33 ?? 0.25 |
3.43 |
3.73 |
4.04 |
4.85 |
5.28 |
5.72 |
3 |
88.90 ?? 0.38 |
4.80 |
5.23 |
5.66 |
6.66 |
7.26 |
7.87 |
4 |
114.30 ?? 0.43 |
5.26 |
5.74 |
6.22 |
7.49 |
8.18 |
8.87 |
6 |
168.28 ?? 0.76 |
6.22 |
9.32 |
7.34 |
9.60 |
10.47 |
11.33 |
8 |
219.08 ?? 1.02 |
7.16 |
7.82 |
8.48 |
11.13 |
12.14 |
13.16 |
10 |
273.05 ?? 1.27 |
8.10 |
8.84 |
9.58 |
13.21 |
14.40 |
|
ASTM Standards
ASTM A53/A53M Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A370 Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A530/A530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing
ASTM E273 Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
ASTM E309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
ASTM E570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
Keywords
ICS Code
ICS Number Code 23.040.10 (Iron and steel pipes)
DOI:10.1520/A0587-96R12
|