ASTM A450 Specification for General Requirement for Carbon and Low Alloy Steel Tube
ASTM A450 covers carbon and low alloy steel tube. Steel samples shall be melt processed and shall either be ingot cast or strand cast. Heat and product analyses shall be performed on the steel materials. Steel specimens shall also undergo tensile tests and shall conform to required values of yield strength and elongation. Flattening test, reverse flattening test, flaring test, flange test, hardness test, hydrostatic test, air underwater pressure test, and nondestructive tests shall be performed on the steel materials.
This specification covers a group of requirements which, with the exceptions of 5.3 and Sections 6, 7, 18, 19, 20, 21, 22, 23, and 24, are mandatory requirements to the following ASTM tubular product specifications:
Referenced Documents
Federal Standard
Fed.Std.No.183 Continuous Identification Marking of Iron and Steel Products
Military Standards
MIL-STD-792 Identification Marking Requirements for Special Purpose Equipment
ASME Boiler and Pressure Vessel Code
SectionIX Welding Qualifications
Steel Structures Painting Council
SSPC-SP6 Surface Preparation Specification No. 6 Commercial Blast Cleaning
ASTM Standards
ASTM A178/A178M Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
ASTM A179/A179M Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A192/A192M Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
ASTM A210/A210M Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
ASTM A214/A214M Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A370 Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A423/A423M Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
ASTM A498 Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
ASTM A530/A530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM A556/A556M Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
ASTM A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
ASTM A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM A822/A822M Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
ASTM A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
ASTM A1047/A1047M Test Method for Pneumatic Leak Testing of Tubing
ASTM D3951 Practice for Commercial Packaging
ASTM E92 Test Method for Vickers Hardness of Metallic Materials
ASTM E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing
ASTM E27 Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing
ASTM E309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
ASTM E426 Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys
ASTM E570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
 ASME SA 450 / SA 450M - 15 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
|
