ASTM A519 Seamless Carbon and Alloy Steel Mechanical Tube
ASTM A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished steel tube or cold-finished steel tubes. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam.
It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The steel tubing shall be coated with a film of oil before shaping to retard rust when specified
This specification covers several grades of carbon and alloy steel seamless mechanical tubing. The grades are listed in Tables 1-3. When welding is used for joining the weldable mechanical tube grades, the welding procedure shall be suitable for the grade, the condition of the components, and the intended service.
This specification covers both seamless hot-finished mechanical tubing and seamless cold-finished mechanical tubing in sizes up to and including 12 3/4 in. (323.8 mm) outside diameter for round tubes with wall thickness as required.
The tubes shall be furnished in the following shapes, as specified by the purchaser: round, square, rectangular, and special sections.
Supplementary requirements of an optional nature are provided and when desired shall be so stated in the order.
The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
2. Referenced Documents
ASTM Standards
ASTM A370 Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A1040 Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
ASTM E59 Practice for Sampling Steel and Iron for Determination of Chemical Composition
Military Standards
MIL-STD-163 Steel Mill Products Preparation for Shipment and Storage
Federal Standard
Fed.Std.No.123 Marking for Shipment (Civil Agencies)
Keywords
alloy steel tube; carbon steel tube; mechanical tubing; seamless steel tube; steel tube;
ICS Code
ICS Number Code 23.040.10 (Iron and steel pipes); 23.040.40 (Metal fittings)
Related References:
1. Welding Process and Letter Designations
2. Welding Stainless Steel to other Steel
3. Welding and Post Fabrication Cleaning for Construction and Architectural Application
4. Welded Stainless Steel Pipe
5. Post weld cleaning and finishing of stainless steel
6. Avoid PWHT Post Weld Heat Treatment
7. Fume Associated With Welding Stainless Steel
8. Avoiding Distortion During Welding Stainless Steel
9. Design Strength of Welded Connections
10. Processes for Welding Stainless Steel
11. Brazing Stainless Steel
12. Soldering Stainless Steel
13. Welding Stainless Steel
14. Selection of Welding Consumables Filler
15. Selection of Welding Consumable for Welding Stainless Steel
16. Filler Metals For Welding Stainless Steel
17. Schaeffler and Delong Diagrams for Predicting Ferrite Levels |