ASTM Standards-B
B1-01(2007) Standard Specification for Hard-Drawn Copper Wire
B2-08 Standard Specification for Medium-Hard-Drawn Copper Wire
B3-01(2007) Standard Specification for Soft or Annealed Copper Wire
B5-00(2005) Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
B6-07 Standard Specification for Zinc
B8-04 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
B9-90(2008) Standard Specification for Bronze Trolley Wire
B16/B16M-05 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
B19-05 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
B21/B21M-06 Standard Specification for Naval Brass Rod, Bar, and Shapes
B22-08 Standard Specification for Bronze Castings for Bridges and Turntables
B23-00(2005) Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
B26/B26M-05 Standard Specification for Aluminum-Alloy Sand Castings
B29-03 Standard Specification for Refined Lead
B30-08a Standard Specification for Copper Alloys in Ingot Form
ASME B31 - Standards of Pressure Piping
B32-08 Standard Specification for Solder Metal
B33-04 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
B36/B36M-08a Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B37-08 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
B39-79(2008) Standard Specification for Nickel
B42-02e1 Standard Specification for Seamless Copper Pipe, Standard Sizes
B43-98(2004) Standard Specification for Seamless Red Brass Pipe, Standard Sizes
B47-95a(2007) Standard Specification for Copper Trolley Wire
B48-00(2005)e1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
B49-08 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
B61-08 Standard Specification for Steam or Valve Bronze Castings
B62-02 Standard Specification for Composition Bronze or Ounce Metal Castings
B63-07 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
B66/B66M-06 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
B67-05 Standard Specification for Car and Tender Journal Bearings, Lined
B68-02 Standard Specification for Seamless Copper Tube, Bright Annealed
B68M-99(2005) Standard Specification for Seamless Copper Tube, Bright Annealed [Metric]
B69-01a(2005) Standard Specification for Rolled Zinc
B70-90(2007) Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
B75-02 Standard Specification for Seamless Copper Tube
B75M-99(2005) Standard Specification for Seamless Copper Tube [Metric]
B76-90(2007) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
B77-07 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
B78-90(2007) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
B80-07 Standard Specification for Magnesium-Alloy Sand Castings
B84-07 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
B85/B85M-08 Standard Specification for Aluminum-Alloy Die Castings
B86-06 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
B88-03 Standard Specification for Seamless Copper Water Tube
B88M-05 Standard Specification for Seamless Copper Water Tube [Metric]
B90/B90M-07 Standard Specification for Magnesium-Alloy Sheet and Plate
B91-07 Standard Specification for Magnesium-Alloy Forgings
B92/B92M-07 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
B93/B93M-07 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
B94-07 Standard Specification for Magnesium-Alloy Die Castings
B96/B96M-06 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
B98/B98M-08 Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
B99/B99M-06 Standard Specification for Copper-Silicon Alloy Wire for General Applications
B100-08 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
B101-07 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
B102-00(2005) Standard Specification for Lead- and Tin-Alloy Die Castings
B103/B103M-07 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
B105-05 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
B106-08 Standard Test Methods for Flexivity of Thermostat Metals
B107/B107M-07 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
B108/B108M-08 Standard Specification for Aluminum-Alloy Permanent Mold Castings
B111/B111M-08a Standard Specification for Copper and Copper Alloy Seamless Condenser Tubes and Ferrule Stock
B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
B115-00(2004) Standard Specification for Electrolytic Copper Cathode
B116-95(2007) Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
B117-07a Standard Practice for Operating Salt Spray (Fog) Apparatus
B121/B121M-01(2006) Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
B122/B122M-08 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
B124/B124M-08a Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B127-05 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
B129-07 Standard Specification for Cartridge Brass Cartridge Case Cups
B130-08 Standard Specification for Commercial Bronze Strip for Bullet Jackets
B131-07 Standard Specification for Copper Alloy Bullet Jacket Cups
B134/B134M-08 Standard Specification for Brass Wire
B135-08a Standard Specification for Seamless Brass Tube
B135M-08a Standard Specification for Seamless Brass Tube [Metric]
B136-84(2008)e1 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
B138/B138M-06 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
B139/B139M-07 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
B140/B140M-07 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
B148-97(2003)e1 Standard Specification for Aluminum-Bronze Sand Castings
B150/B150M-08 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
B151/B151M-05 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
B152/B152M-06ae1 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B153-05 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B154-05 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
B159/B159M-05 Standard Specification for Phosphor Bronze Wire
B160-05e1 Standard Specification for Nickel Rod and Bar
B161-05e1 Standard Specification for Nickel Seamless Pipe and Tube
B162-99(2005)e1 Standard Specification for Nickel Plate, Sheet, and Strip
B163-08 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
B164-03(2008) Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
B165-05 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
B166-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
B167-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
B168-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
B169/B169M-05 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
B170-99(2004) Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
B171/B171M-04e1 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
B172-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
B173-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
B174-02(2007)e1 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
B176-08 Standard Specification for Copper-Alloy Die Castings
B177-01(2006)e1 Standard Guide for Engineering Chromium Electroplating
B179-06 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
B183-79(2004)e1 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
B187/B187M-06 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
B188-02 Standard Specification for Seamless Copper Bus Pipe and Tube
B189-05 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
B193-02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials
B194-08 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B196/B196M-07 Standard Specification for Copper-Beryllium Alloy Rod and Bar
B197/B197M-07 Standard Specification for Copper-Beryllium Alloy Wire
B199-07 Standard Specification for Magnesium-Alloy Permanent Mold Castings
B200-85(2004) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
B201-80(2004) Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
B206/B206M-07 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
B209-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
B210-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B210M-05 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
B211-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
B211M-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
B212-99(2006) Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
B213-03 Standard Test Method for Flow Rate of Metal Powders
B214-07 Standard Test Method for Sieve Analysis of Metal Powders
B215-04 Standard Practices for Sampling Metal Powders
B216-97(2003) Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
B221M-07 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
B221-08 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
B224-04 Standard Classification of Coppers
B226-04 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
B227-04 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
B228-04 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
B229-04 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
B230/B230M-07 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
B231/B231M-04 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
B232/B232M-01e1 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
B233-97(2007) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
B234-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
B234M-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
B236M-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
B236-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
B237-01(2006) Standard Specification for Refined Antimony
B240-07 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B241/B241M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B242-99(2004)e1 Standard Guide for Preparation of High-Carbon Steel for Electroplating
B243-08a Standard Terminology of Powder Metallurgy
B244-97(2002) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
B246-05 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
B247-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
B247M-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
B248-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B248M-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]
B249/B249M-06 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B250/B250M-07 Standard Specification for General Requirements for Wrought Copper Alloy Wire
B251M-97(2003) Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
B251-02e1 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
B252-92(2004) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
B253-87(2005)e1 Standard Guide for Preparation of Aluminum Alloys for Electroplating
B254-92(2004)e1 Standard Practice for Preparation of and Electroplating on Stainless Steel
B258-02(2008) Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
B263-04 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM B265-08a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
B267-07 Standard Specification for Wire for Use In Wire-Wound Resistors
B271-08 Standard Specification for Copper-Base Alloy Centrifugal Castings
B272-07 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
B275-05 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
B276-05e1 Standard Test Method for Apparent Porosity in Cemented Carbides
B277-95(2006) Standard Test Method for Hardness of Electrical Contact Materials
B279-04 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
B280-08 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B281-88(2008) Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
B283-08a Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
B286-07 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides
B296-03(2008) Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
B298-07 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
B299-07 Standard Specification for Titanium Sponge
B301/B301M-08 Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
B302-07 Standard Specification for Threadless Copper Pipe, Standard Sizes
B306-02 Standard Specification for Copper Drainage Tube (DWV)
B308/B308M-02 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
B311-93(2002)e1 Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity
B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
B313/B313M-02e1 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
B315-06 Standard Specification for Seamless Copper Alloy Pipe and Tube
B316/B316M-02 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
B317/B317M-07 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
B319-91(2004) Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
B320-60(2008) Standard Practice for Preparation of Iron Castings for Electroplating
B322-99(2004) Standard Guide for Cleaning Metals Prior to Electroplating
B324-01(2007) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
B327-01(2005) Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
B328-96(2003)e1 Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
B329-06 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
B330-07 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
B331-95(2002) Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
B333-03(2008) Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
B335-02(2008) Standard Specification for Nickel-Molybdenum Alloy Rod
B338-08a Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
B339-00(2005) Standard Specification for Pig Tin
B343-92a(2004)e1 Standard Practice for Preparation of Nickel for Electroplating with Nickel
B344-01 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
B345/B345M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
B348-08a Standard Specification for Titanium and Titanium Alloy Bars and Billets
B349/B349M-03 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
B350/B350M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
B351/B351M-08 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
B352/B352M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
B353-07 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
B354-05 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
B355-06 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
B359/B359M-02(2006) Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
B360-01 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
B361-02 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
B362-91(2008) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
B363-06a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
B364-96(2002) Standard Specification for Tantalum and Tantalum Alloy Ingots
B365-98(2004) Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
B366-04be1 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
B367-08a Standard Specification for Titanium and Titanium Alloy Castings
B368-97(2003)e1 Standard Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
B369-06 Standard Specification for Copper-Nickel Alloy Castings
B370-03 Standard Specification for Copper Sheet and Strip for Building Construction
B371/B371M-08 Standard Specification for Copper-Zinc-Silicon Alloy Rod
B372-97(2003) Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
B373-00(2006) Standard Specification for Aluminum Foil for Capacitors
B374-06 Standard Terminology Relating to Electroplating
B379-04 Standard Specification for Phosphorized Coppers—Refinery Shapes
B380-97(2008)e1 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
B381-08a Standard Specification for Titanium and Titanium Alloy Forgings
B386-03 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
B387-90(2001) Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
B388-06 Standard Specification for Thermostat Metal Sheet and Strip
B389-81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
B391-03 Standard Specification for Niobium and Niobium Alloy Ingots
B392-03 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
B393-05 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
B394-03 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
B395/B395M-08 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
B398/B398M-02(2007) Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
B399/B399M-04 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
B400-08 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
B401-04 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
B403-07 Standard Specification for Magnesium-Alloy Investment Castings
B406-96(2005) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
B407-08 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
B408-06 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B409-06e1 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
B411/B411M-08 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
B413-97a(2008) Standard Specification for Refined Silver
B415-98(2007) Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
B416-98(2007) Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
B417-00(2006)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
B418-06 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
B422-08a Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
B423-05 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
B424-05 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
B425-99(2005) Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
B427-02 Standard Specification for Gear Bronze Alloy Castings
B428-08 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
B429/B429M-06 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B430-97(2006)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
B432-04 Standard Specification for Copper and Copper Alloy Clad Steel Plate
B434-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
B435-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
B438-08 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B439-08 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B440-00(2005) Standard Specification for Cadmium
B441-04 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
B443-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
B444-06 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
B446-03(2008) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
B447-07 Standard Specification for Welded Copper Tube
B449-93(2004) Standard Specification for Chromates on Aluminum
B452-02 Standard Specification for Copper-Clad Steel Wire for Electronic Application
B453/B453M-08 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
B455-05 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
B456-03 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
B457-67(2008)e1 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
B462-06 Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive
B463-04 Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
B464-05 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
B465-04 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B466/B466M-07 Standard Specification for Seamless Copper-Nickel Pipe and Tube
B467-88(2003) Standard Specification for Welded Copper-Nickel Pipe
B468-04 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
B470-02(2007) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
B472-04a Standard Specification for Nickel Alloy Billets and Bars for Reforging
B473-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
B474-03 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
B475-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
B476-01(2006) Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
B477-97(2008) Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
B479-06 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
B480-88(2006) Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
B481-68(2008) Standard Practice for Preparation of Titanium and Titanium Alloys
for Electroplating
B482-85(2008) Standard Practice for
Preparation of Tungsten and Tungsten Alloys for Electroplating
B483/B483M-03 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
B487-85(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
B488-01(2006) Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
B489-85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
B490-92(2008)e1 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
B491/B491M-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
B493-01(2003) Standard Specification for Zirconium and Zirconium Alloy Forgings
B494/B494M-08 Standard Specification for Primary Zirconium
B495-05 Standard Specification for Zirconium and Zirconium Alloy Ingots
B496-04 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
B497-00(2006) Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
B498/B498M-98(2002) Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B499-96(2002) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
B500/B500M-98(2002) Standard Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)
B501-04 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
B502-02(2007) Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
B504-90(2007) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
B505/B505M-08 Standard Specification for Copper Alloy Continuous Castings
B507-86(2008)e1 Standard Practice for Design of Articles to Be Electroplated on Racks
B508-08 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
B511-01(2005) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
B512-04 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
B514-05 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
B515-95(2002) Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
B516-03 Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes
B517-05 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
B520-93(2007) Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
B521-98(2004) Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
B522-01(2006) Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
B523/B523M-07 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
B524/B524M-99(2005) Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
B530-02 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
B532-85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces
B533-85(2004) Standard Test Method for Peel Strength of Metal Electroplated Plastics
B534-07 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B535-06 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
B536-07 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
B537-70(2007) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
B539-02(2008) Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
B540-97(2008) Standard Specification for Palladium Electrical Contact Alloy
B541-01(2006) Standard Specification for Gold Electrical Contact Alloy
B542-07 Standard Terminology Relating to Electrical Contacts and Their Use
B543-07e1 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
B545-97(2004)e1 Standard Specification for Electrodeposited Coatings of Tin
B546-04 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
B547/B547M-02 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
B548-03 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
B549-04 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)
B550/B550M-07 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
B551/B551M-07 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
B552-08 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
B555-86(2007) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
B556-90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
B557-06 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B557M-07e1 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
B558-79(2008) Standard Practice for Preparation of Nickel Alloys for Electroplating
B559-93(2007) Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
B560-00(2005) Standard Specification for Modern Pewter Alloys
B561-94(2005) Standard Specification for Refined Platinum
B562-95(2005) Standard Specification for Refined Gold
B563-01(2006) Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
B564-06a Standard Specification for Nickel Alloy Forgings
B565-04 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
B566-04a Standard Specification for Copper-Clad Aluminum Wire
B567-98(2003) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
B568-98(2004) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
B569-04 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
B570-06 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
B571-97(2008)e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
B572-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
B573-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
B574-06e1 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
B575-06 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip
B576-94(2005) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
B577-93(2004)e1 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
B578-87(2004) Standard Test Method for Microhardness of Electroplated Coatings
B579-73(2004) Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
B580-79(2004) Standard Specification for Anodic Oxide Coatings on Aluminum
B581-02(2008) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
B582-07 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
B584-08 Standard Specification for Copper Alloy Sand Castings for General Applications
B587-08 Standard Specification for Welded Brass Tube
B588-88(2006) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
B589-94(2005) Standard Specification for Refined Palladium
B591-08 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
B592-01(2006) Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
B594-06 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
B595-95(2006) Standard Specification for Sintered Aluminum Structural Parts
B596-89(2006) Standard Specification for Gold-Copper Alloy Electrical Contact Material
B598-98(2004) Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
B599-92(2003)e1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
B600-91(2002)e1 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
B601-07 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
B602-88(2005) Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
B603-07 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
B604-91(2008) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
B605-95a(2004) Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
B606-02 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
B607-91(2003) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
B608-07 Standard Specification for Welded Copper-Alloy Pipe
B609/B609M-99(2004) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
B610-08 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
B611-85(2005) Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
B613-76(2006) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
B614-05 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
B615-79(2006) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
B616-96(2006) Standard Specification for Refined Rhodium
B617-98(2004) Standard Specification for Coin Silver Electrical Contact Alloy
B618/B618M-08 Standard Specification for Aluminum-Alloy Investment Castings
B619-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
B620-03(2008) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
B621-02(2006) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
B622-06 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
B624-07 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
B625-05 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
B626-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
B628-98(2004) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
B629-77(2008) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
B630-88(2006) Standard Practice for Preparation of Chromium for Electroplating with Chromium
B631-93(2004) Standard Specification for Silver-Tungsten Electrical Contact Materials
B632/B632M-08 Standard Specification for Aluminum-Alloy Rolled Tread Plate
B633-07 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B634-88(2004)e1 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
B635-00(2004)e1 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
B637-06e1 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
B639-02(2008) Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
B640-07 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
B643-00(2005) Standard Specification for Copper-Beryllium Alloy Seamless Tube
B644-05 Standard Specification for Copper Alloy Addition Agents
B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
B646-06a Standard Practice for Fracture Toughness Testing of Aluminum Alloys
B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
B649-06 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
B650-95(2008) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
B652/B652M-04 Standard Specification for Niobium-Hafnium Alloy Ingots
B653/B653M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
B654/B654M-04 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
B655/B655M-04 Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
B657-05 Guide for Metallographic Identification of Microstructure in Cemented Carbides
B658/B658M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
B659-90(2008)e1 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
B660-02 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
B661-06 Standard Practice for Heat Treatment of Magnesium Alloys
B662-94(2006) Standard Specification for Silver-Molybdenum Electrical Contact Material
B663-94(2006) Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
B664-90(2006) Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material
B665-03 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
B666/B666M-08 Standard Practice for Identification Marking of Aluminum and Magnesium Products
B667-97(2003)e1 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
B668-05 Standard Specification for UNS N08028 Seamless Pipe and Tube
B670-07 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
B671-81(2005) Standard Specification for Refined Iridium
B672-02(2007) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
B673-05e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
B674-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
B675-02(2007) Standard Specification for UNS N08367 Welded Pipe
B676-03 Standard Specification for UNS N08367 Welded Tube
B677-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
B678-86(2006) Standard Test Method for Solderability of Metallic-Coated Products
B679-98(2004)e1 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
B680-80(2004) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
B682-01 Standard Specification for Standard Metric Sizes of Electrical Conductors
B683-01(2006) Standard Specification for Pure Palladium Electrical Contact Material
B684-97(2008) Standard Specification for Platinum-Iridium Electrical Contact Materials
B685-01(2006) Standard Specification for Palladium-Copper Electrical Contact Material
B686/B686M-08 Standard Specification for Aluminum Alloy Castings, High-Strength
B687-99(2005)e1 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
B688-96(2004) Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
B689-97(2008) Standard Specification for Electroplated Engineering Nickel Coatings
B690-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
B691-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
B692-90(2006) Standard Specification for 75 % Silver-25 % Graphite Sliding Contact Material
B693-91(2006) Standard Specification for Silver-Nickel Electrical Contact Materials
B694-03 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
B695-04 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B696-00(2004)e1 Standard Specification for Coatings of Cadmium Mechanically Deposited
B697-88(2005) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
B698-02 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
B699-86(2008) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
B700-08 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
B701/B701M-06 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
B702-93(2004) Standard Specification for Copper-Tungsten Electrical Contact Material
B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
B704-03 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
B705-05 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
B706-00(2006) Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
B708-05 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
B709-04 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
B710-04 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
B711-05 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
B712-93(2006) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
B715-96(2001) Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
B717-96(2006) Standard Specification for Refined Ruthenium
B718-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
B719-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
B722-06 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
B723-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
B725-05 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
B726-02(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
B727-04 Standard Practice for Preparation of Plastics Materials for Electroplating
B729-05 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
B730-08 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
B731-96(2006) Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material
B733-04 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
B734-97(2008) Standard Specification for Electrodeposited Copper for Engineering Uses
B735-06 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
B736-00(2006) Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
B737-05 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
B738-03(2008) Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
B739-03(2008) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
B740-02 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
B742-90(2006) Standard Specification for Fine Silver Electrical Contact Fabricated Material
B743-06 Standard Specification for Seamless Copper Tube in Coils
B744/B744M-05 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
B745/B745M-97(2005) Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
B746/B746M-02(2007) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
B747-07 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
B749-03 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
B750-07 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
B751-03 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
B752-06 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
B753-07 Standard Specification for Thermostat Component Alloys
B754-89(2005) Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
B755-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
B756-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
B757-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
B758-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
B759-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
B760-07 Standard Specification for Tungsten Plate, Sheet, and Foil
B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
B762-90(2005) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
B763-08a Standard Specification for Copper Alloy Sand Castings for Valve Applications
B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
B765-03(2008) Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
B766-86(2008) Standard Specification for Electrodeposited Coatings of Cadmium
B767-88(2006) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
B768-99(2004) Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
B769-07 Standard Test Method for Shear Testing of Aluminum Alloys
B770-08 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
B771-87(2006) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
B772-97(2008) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
B773-96(2008) Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
B774-00(2005)e1 Standard Specification for Low Melting Point Alloys
B775-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
B776-07 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
B777-07 Standard Specification for Tungsten Base, High-Density Metal
B778-02(2007) Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
B779-03 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
B780-98(2004) Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
B781-93a(2006) Standard Guide for Silver-Cadmium Oxide Contact Material
B783-04 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
B784-01(2006) Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
B786-08 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
B787/B787M-04 Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
B788/B788M-04 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
B789/B789M-99(2005) Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
B790/B790M-00(2006) Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
B792-01(2005)e1 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
B793-08 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
B794-97(2003) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
B795-07 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
B796-07 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications
B797-93(2007) Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
B798-95(2005) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
B799-95(2005) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
B800-05 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
B801-07 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
B802/B802M-02 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B803-02 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
B804-02(2007) Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
B805-06 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
B807/B807M-06 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
B809-95(2008) Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”
B810-01a(2006) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
B811-02(2007) Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
B812-96(2008) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
B813-00e1 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
B814-06 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
B815-02(2006) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
B816-00(2004)e1 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
B817-03 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
B818-03(2008) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
B819-00(2006) Standard Specification for Seamless Copper Tube for Medical Gas Systems
B820-04e1 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
B821-02(2007) Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
B823-01 Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts
B824-04 Standard Specification for General Requirements for Copper Alloy Castings
B825-02(2008) Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
B826-03 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
B827-05 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
B828-02 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
B829-04a Standard Specification for General Requirements for Nickel and Nickel Alloys Stainless Steel Seamless Pipe and Tube
B830-97(2003) Standard Specification for Uniform Test Methods and Frequency
B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
B832-93(2008) Standard Guide for Electroforming with Nickel and Copper
B833-06 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
B834-95(2003) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
B835-04 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
B836-00(2005) Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
B837-01 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems
B839-04 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod—Inclined Wedge Method
B840-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
B841-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
B842-99(2005) Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
B843-07 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
B844-98(2004) Standard Guide for Silver-Tin Oxide Contact Material
B845-97(2008)e1 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
B846-06a Standard Terminology for Copper and Copper Alloys
B848-05 Specification for Powder Forged (P/F) Ferrous Materials
B849-02(2007) Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
B850-98(2004) Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
B851-04 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
B852-07 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
B853-07 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
B854-98(2004) Standard Guide for Measuring Electrical Contact Intermittences
B855-06 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
B856-03 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
B857-02 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
B858-06 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
B859-03(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
B860-07 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
B861-08a Standard Specification for Titanium and Titanium Alloy Seamless Stainless Steel Pipe
B862-08a Standard Specification for Titanium and Titanium Alloy Welded Pipe
B863-08a Standard Specification for Titanium and Titanium Alloy Wire
B864/B864M-00(2007) Standard Specification for Corrugated Aluminum Box Culverts
B865-04 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
B866-95(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
B867-95(2008) Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
B868-96(2008) Standard Practice for Contact Performance Classification of Electrical Connection Systems
B869-07 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
B870-08 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
B871-01(2007) Standard Test Method for Tear Testing of Aluminum Alloy Products
B872-06 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
B873-01(2007) Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
B874-96(2008) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
B875-96(2008) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
B877-96(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
B878-97(2003) Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
B879-97(2008)e1 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
B880-03(2008) Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
B881-05 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
B882-05 Specification for Pre-Patinated Copper for Architectural Applications
B883-05 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
B884-05 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
B885-97(2003) Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
B886-03(2008) Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
B887-03(2008)e1 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
B888-08 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
B891-98(2004) Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
B892-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
B893-98(2008) Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
B894-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
B895-05 Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M) Parts/Specimens by Immersion in a Sodium Chloride Solution
B896-99(2005) Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
B897-03 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot
B898-05e1 Standard Specification for Reactive and Refractory Metal Clad Plate
B899-06 Standard Terminology Relating to Non-ferrous Metals and Alloys
B900-04 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
B901-04 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
B902-04a Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
B903-00(2005) Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
B904-00(2004) Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
B905-00(2005) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
B906-02(2006) Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
B907-05 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
B908-03(2008) Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
B909-00(2006) Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
B910/B910M-07 Standard Specification for Annealed Copper-Clad Steel Wire
B911/B911M-05 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
B912-02(2008)e1 Standard Specification for Passivation of Stainless Steel Tube Using Electropolishing
B913-05 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
B914-03(2008) Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
B915-01(2007) Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
B916-01(2007) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
B917/B917M-08 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
B918-01 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
B919-01(2006) Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
B920-01(2006)e1 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
B921-08 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
B923-02(2008) Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
B924-02(2006) Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
B925-08 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
B926-03 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
B927/B927M-08a Standard Specification for Brass Rod, Bar, and Shapes
B928/B928M-07 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
B929-05 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
B931-03 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
B932-04 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
B933-04 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
B935-05 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
B936-08 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
B937-04 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
B938-04 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)
B939-05 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials
B940-05 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
B941-05 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
B942-05 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
B943-05 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
B944-06 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
B945-06 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
B946-06 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
B947-06 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
B949-08 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
B950-06 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
B951-08 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
B952-07 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
B953-07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
B954-07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
B955/B955M-08 Standard Specification for Aluminum-Alloy Centrifugal Castings
B956-07e1 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
B960-08 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
B961-08 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application |
