Ambient Temperature Mechanical Properties for EN 10217-7
EN 10217-7 2005 is for “Welded steel tubes for pressure purposes – Technical delivery conditions”. It covers a number of austenitic and duplex stainless steel. The mechanical properties are summarised in the table below. This article is not a substitute for the full standard.
| Steel grade | Proof strength min MPA | Tensile strengthMPa | Elongation A min % | Resistance to intergranular corrosion | |||
| Steel name | Steel number | Rp0.2 | Rp1.0 | Rm | long | trans | |
| Austenitic | |||||||
| X2CrNi18-9 | 1.4307 | 180 | 215 | 470/670 | 40 | 35 | Yes |
| X2CrNi19-11 | 1.4306 | 180 | 215 | 460/680 | 40 | 35 | Yes |
| X2CrNiN18-10 | 1.4311 | 270 | 305 | 550/760 | 35 | 30 | Yes |
| X5CrNi18-10 | 1.4301 | 195 | 230 | 500/700 | 40 | 35 | Yes* |
| X6CrNiTi18-10 | 1.4541 | 200 | 235 | 500/730 | 35 | 30 | Yes |
| X6CrNiNb18-10 | 1.4550 | 205 | 240 | 510/740 | 35 | 30 | Yes |
| X2CrNiMo17-12-2 | 1.4404 | 190 | 225 | 490/690 | 40 | 30 | Yes |
| X5CrNiMo17-12-2 | 1.4401 | 205 | 240 | 510/710 | 40 | 30 | Yes* |
| XCrNiMoTi17-12-2 | 1.4571 | 210 | 245 | 500/730 | 35 | 30 | Yes |
| X2CrNiMo17-12-3 | 1.4432 | 190 | 225 | 490/690 | 40 | 30 | Yes |
| X2CrNiMoN17-13-3 | 1.4429 | 295 | 330 | 580/800 | 35 | 30 | Yes |
| X3CrNiMo17-13-3 | 1.4436 | 205 | 240 | 510/710 | 40 | 30 | Yes* |
| X2CrNiMo18-14-3 | 1.4435 | 190 | 225 | 490/690 | 40 | 35 | Yes |
| X2CrNiMoN17-13-5 | 1.4439 | 285 | 315 | 580/800 | 35 | 30 | Yes |
| X2CrNiMo18-15-4 | 1.4438 | 220 | 250 | 490/690 | 35 | 30 | Yes |
| X1NiCrMoCu31-27-4 | 1.4563 | 215 | 245 | 500/750 | 40 | 35 | Yes |
| X1CrNiMoCu25-20-5 | 1.4539 | 220 | 250 | 520/720 | 35 | 30 | Yes |
| X1CrNiMoCuN20-18-7 | 1.4547 | 300 | 340 | 650/850 | 35 | 30 | Yes |
| X1NiCrMoCuN25-20-7 | 1.4529 | 300 | 340 | 600/800 | 40 | 40 | Yes |
| Austenitic ferritic steels | |||||||
| X2CrNiMoN22-5-3 | 1.4462 | 450 | 700/920 | 25 | 20 | Yes | |
| X2CrNiN23-4 | 1.4362 | 400 | 600/820 | 25 | 25 | Yes | |
| X2CrNiMoN25-7-4 | 1.4410 | 550 | 800/1000 | 20 | 20 | Yes | |
| X2CrNiMoCuWN25-7-4 | 1.4501 | 550 | 800/1000 | 20 | 20 | Yes | |
* Normally not fulfilled in the sensitised condition
Properties | Tensile Strength | Yield Strength | Typical Yield | Typical Tensile | Yield strength & Yield point | Stainless Steel Tensile Strength | Bend Testing | Compression Testing | Difference Between Yield and Tensile | AISI Steel Yield Tensile | Strength Properties of Metals | Strength of Materials | Stress | Aluminum Mechanical Properties | Tensile Proof Stress Of Metric Bolts and Screws | Tensile Strength of Metric Nuts | Stainless Tensile Of Metric Bolts Screws
Physical Properties Stainless Steel Carbon Steel | Thermoplastics Physical Properties | British Standard Strength of Steel | Shear and Tensile | Elastic Properties Young Modulus | Stength European Standard | Ductility | Young’s Modulus | Non-Ferrous Modulus of Elasticity | Steel Bolts Strength | Iron Steel Modulus of Elasticity | Thermal Properties | Properties of Thermal | Thread Shear Calculator | Metals Properties | Stainless Steel Physical Properties | Definition Mechanical Properties
EN 10217 – 7 Welded steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties
Temperature Effects on Metal Strength
EN 10217-7 Chemical Compositions of Stainless Steel Pipes
EN 10217-5/A1 Welded steel tubes for pressure purposes
Ambient temperature mechanical properties for EN 10217-7
Ambient temperature mechanical properties for BS EN 10253-3 and 10253-4
EN10216-5 Stainless Steel Tube
Ambient temperature mechanical properties for EN 10216-5
Chemical compositions of stainless steels to EN 10216-5
EN 10216-5 stainless steel tubes pipes