3003 Aluminium Specification

3003 - Alloyed with 1,2% manganese. Very Good workability, weldability and corrosion resistance. Tensile strength range 17,000 to 30,000 psi.

Principal Design Features
AL 3003 is an alloy with very good corrosion resistance and moderate strength. It is not heat treatable and develops strengthening from cold working only.

Applications
Commonly used in chemical equipment, ductwork, and in general sheet metal work. 3003 is also used in the manufacture of cooking utensils, pressure vessels, builder's hardware, eyelet stock, ice cube trays, garage doors, awning slats, refrigerator panels, gas lines, gasoline tanks, heat exchanger, drawn and spun parts, and storage tanks.

Machinability
The AL 3003 alloy is readily machined and is considered as having good machinability for the Aluminium alloys,.

Forming
This alloy is readily formed by either conventional cold working or hot working.



Welding
Welding is readily accomplished by means of conventional welding methods. Filler rod is generally AL 1100 alloy. When welding AL 3003 to other Aluminium alloys, such as 5052, 6061 or 6062 the filler rod should be AL 4043.

Heat Treatment
AL 3003 is a non-heat treatable alloy.

Forging
The alloy may be hot forged in the range of 950 F to 500 F.

Hot Working
The hot working range (as for forging) is 950 F to 500 F. In that range the alloy is easily hot worked.

Cold Working
AL 3003 alloy is readily cold worked by all conventional methods..

Annealing
Annealing, during or following cold working, is done at 775 F, allowing adequate time for thorough heating, followed by air cooling.

Hardening
Hardens as a result of cold working only.

Other Physical Props
Electrical conductivity 40% of copper.

Other Mechanical Props
Shear strength for O temper (annealed) is 11 ksi. For H14 (cold worked) it is 14 ksi.