5086 Aluminium Specification
5086 - Alloyed with 4.0% magnesium, .45% manganese and .15% chromium. Very good corrosion resistance, good workability. Tensile strength between 40,000 to 54,000 psi.
Principal Design Features This is a high strength structural alloy. It is not heat treatable.
Applications Commonly used in the manufacture of unfired, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, tanks, TV towers, transportation equipment, and in missile components.
Machinability Machinability in the strain hardened tempers (H34, H36, H38) is relatively good. In the annealed (O temper) machining is difficult, but still can be accomplished. Use of lubricants is advised.
Forming Forming characteristics are best with the alloy in the O temper -- less good in the H36 or H38 tempers.
Welding This alloy is readily weldable by conventional methods. Use of electric arc welding in particular produces excellent results.
Heat Treatment The alloy is non-heat treatable.
Forging No specific data as to hot working range. However the alloy is forgeable.
Hot Working No data in regard to hot forming. Cold forming characteristics are excellent and usually would not necessitate hot working.
Cold Working Excellent cold working characteristics in the O temper and somewhat less good in H36 and H38 tempers.
Annealing Anneal at 650 F for long enough to insure thorough heating. Air cool.
Hardening Hardens by cold working only.r
Other Physical Props Electrical conductivity 30% of copper.
Other Mechanical Props
Shear strength for O temper is 23 ksi, for H34 it is 27 ksi
Aluminium 5086 |
Specifications: |
|
ASTM B209,
ASTM B210,
ASTM B221,
ASTM B241,
ASTM B313,
ASTM B345,
ASTM B361,
ASTM B547,
ASTM B548,
MIL C-26094,
MIL S-24149/2,
QQ A-200/5,
QQ A-250/7,
QQ WW-T-700/5,
SAE J454,
UNS A95086, |
Chemical Composition |
Aluminium |
|
Balance |
Chromium |
|
0.05 - 0.25 |
Copper |
|
0.1 max |
Iron |
|
0.5 max |
Magnesium |
|
3.5 - 4.5 |
Manganese |
|
0.2 - 0.7 |
Remainder Each |
|
0.05 max |
Remainder Total |
|
0.15 max |
Silicon |
|
0.4 max |
Titanium |
|
0.15 max |
Zinc |
|
0.25 max |
Physical Data |
Density (lb / cu. in.) |
|
0.096 |
Specific Gravity |
|
2.66 |
Melting Point (Deg F) |
|
1090 |
Modulus of Elasticity Tension |
|
10.3 |
|