Inconel Tubing Inconel Alloy Tubes 600 601 617 625 690 706 718 X750 6020 MA754 783 792 825 HX

Inconel Alloys Synonyms:

Inconel alloy, Nickel chromium alloys, Inconel powder, Inconel seamless tube, Inconel foil, Inconel strip, Inconel sheet, Inconel plate, Inconel bar, Inconel rod, Inconel wire, Inconel 600, Inconel 617, Inconel 690, Inconel 706, Inconel 718 SPF, Inconel X-750, Inconel MA754, Inconel 783, Inconel 792, Inconel 825, Inconel HX, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625, Nicrofer 6020, Inconel 601, Inconel 625, Inconel 706, Inconel 718, Inconel X-750

Inconel Alloys Grades Available:

Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 625 LCF, Inconel 706, Inconel 718, Inconel 718 SPF, Inconel X-750, Inconel MA754, Inconel 783, Inconel 792, Inconel HX

Inconel General Description:

Nickel hromium alloys. The twelve or so different Inconel® alloys have good resistance to ossidazione, reducing environments, corrosive environments, alta temperatura environments, cryogenic temperatura, relaxation resistance and good proprietà meccaniche.

Inconel Alloy Specification:

Specifica standard ASME SB163 per tubi per condensatori e scambiatori di calore in nichel e leghe di nichel senza saldatura

Specifica standard ASME SB165 per tubi senza saldatura in lega di nichel-rame (UNS N04400)*.

Specifica standard ASME SB167 per leghe di nichel-cromo-ferro, lega di nichel-cromo-cobalto-molibdeno (UNS N06617) e lega di nichel-ferro-cromo-tungsteno (UNS N06674) senza saldatura per tubi e condotti.

ASME SB407 Specificazioni standard per tubi senza saldatura in lega nichel-ferro-cromo

Specifica standard ASME SB423 per tubi senza saldatura in lega nichel-ferro-cromo-molibdeno-rame (UNS N08825, N08221 e N06845)

ASME SB444 Specifiche standard per le leghe di nichel-cromo-molibdeno-columbium (UNS N06625 e UNS N06852) e le leghe di nichel-cromo-molibdeno-silicio (UNS N06219).

Specifica standard ASME SB622 per tubi senza saldatura in nichel e in lega di nichel e cobalto

Tubi senza saldatura ASME SB668 UNS N08028

Specifica standard ASME SB690 per tubi senza saldatura in lega di ferro-nichel-cromo-molibdeno (UNS N08366 e UNS N08367)

ASME SB729 Specifica standard per tubi e tubazioni in lega di nichel UNS N08020, UNS N08026 e UNS N08024 senza saldatura

Inconel Composizione chimica:

Different Inconels have widely varying compositions, but all are predominantly nickel, with chromium as the second element.Inconel Alloy Chemical Composition Element (Typical % by mass)

Inconel	Ni	Cr	Ferro	Mo	Nb	Co	Mn	Cu	Al	Ti	Si	C	S	P	Boron
600 N06600	72.0	14.0-17.0	6.0-10.0				1.0	0.5			0.5	0.15	0.015
625 N06625	58.0	20.0-23.0	5.0	8.0-10.0	3.15 -4.15	1.0	0.5		0.4	0.4	0.5	0.1	0.015	0.015
718 N07718	50.0-55.0	17.0-21.0	equilibrio	2.8-3.3	4.75 -5.5	1.0	0.35	0.2-0.8	0.65-1.15	0.3	0.35	0.08	0.015	0.015	0.006

Inconel Alloys Physical Characteristics Available:

Powder, Foil, Strip, Sheet, Plate, Bar, Wire, Seamless tube and Wire to your specificationInconel Alloys Typical Applications:

Furnace muffles, electronic components, trattamento termico equipment, steam generator tubing, heat exchangers, radiant tubes, aircraft engine parts, spray bars, nuclear reactors, hot extrusion tooling, bolts, etc.Inconel Trademark Acknowledgement:

Inconel is the registered trademark of the Special Metals Corporation