EN Europaischen Normen European Standards

EN Standards:

	EN European Standard for Stainless Steel
	European EN Standard Grade Summary
	European Dimensional Tolerance Standard for Stainless Steel
	EN 10090 Chemical Composition of Valve Steel
	BS 970 Stainless Steel Chemical Composition
	BS 3100 1991 Cast Steel Chemical Composition
	BS 3100 Chemical Composition of Stainless Steel
	BS 1449-2 Chemical Composition of Stainless Steel
	BS Aerospace S100 Chemical Composition Mechanical Properties
	BS Aerospace S500 Chemical Composition Mechanical Properties
	EN 10204 Test Certificates for Stainless Steel
	EN 10302 Chemical Composition of Creep Resisting Steel
	EN 10302 Mechanical Properties of Creep Resisting Steel
	Tolerance to EN 10296-2 Welded Stainless Steel Tubes
	EN 10296-2 Stainless Steel Chemical Composition
	EN 10296-2 Stainless Steel Welded Tubes Mechanical Properties
	Chemical Compositions of Stainless Steel to EN 10297-2
	EN 10297-2 Mechanical Properties of Stainless Steel Tubes
	Tolerances to EN 10297-2 for Seamless Stainless Steel Tubes
	EN 10269 Room Temperature Mechanical Properties of Stainless Steel
	EN 10269 Elevated and Sub-Zero Temperature Mechanical Properties
	EN 10269 Chemical Compositions of Stainless Steel
	EN 10283 Chemical Composition of Stainless Steel Casting
	EN 10095 Chemical Composition of Heat Resisting Steel
	EN 10095 Mechanical Properties of Stainless Steel
	EN 10088-3 Mechanical Martensitic and Precipitation Hardening
	EN 10088-3 Mechanical Properties of Ferritic Stainless Steel
	EN 10088-3 Duplex Stainless Steel Long Products Mechanical Properties
	EN 10088-3 Cold Worked Wire Mechanical Properties
	EN 10088-3 Mechanical Properties of ferritic steel long product
	EN 10088-3 Mechanical of Martensitic and Precipitation Hardening Bright Bars
	EN 10088-3 Mechanical of Martensitic and Precipitation Hardening Bright Bars
	EN 10088-3 Mechanical Properties of Duplex Stainless Steel Bar
	EN 10088-2 Mechanical Properties of Martensitic Stainless Steel
	EN 10088-2 Mechanical Properties of Ferritic Stainless Steel
	EN 10088-2 Mechanical Properties of Duplex Stainless Steel
	EN 10088-2 Mechanical Properties of Precipitation Hardening Stainless Steel Flat
	EN 10088-2 Chemical Composition Stainless Steel
	EN 10217-7 Mechanical Properties for Stainless Steel
	Availability of Stainless Steel Long Products Grades from EN 10088-3
	Availability of Stainless Steel Flat Grades EN 10088-2
	Comparing US American ASTM and British BS Piping Standard
	EN 10293:2005. Steel Castings for General Engineering Uses
	EN 10277-1:2008 Bright Steel Products Technical delivery conditions. General
	EN 10213 :2008 Steel Castings for pressure purposes
	EN 10149-1:1996: Specification for hot-rolled flat products made of high yield strength steels for cold forming. General delivery conditions
	EN 10132-1:2000 Cold rolled narrow steel strip for heat treatment – Technical delivery conditions (T.D.C.)-General
	EN 10130:2006 Cold Rolled low-carbon steel flat products for cold forming – Technical delivery conditions
	EN 10088 Stainless Steels
	EN 10087 Free Cutting Steels- Technical Delivery conditions for semi-finished products hot rolled bars and rods
	EN 10083-1 :2006 Quenched and Tempered Steels – Technical Delivery Conditions for Special Steels
	EN 10025-1:2004 – Hot rolled products of structural steels. General technical delivery conditions
	EN 10028-1:2000 – Flat products made of Steel for Pressure Purposes:General Requirements
	EN 10028-7 Chemical Composition of Stainless Steel Flat
	EN 10028-7 Elevated Temperature Mechanical Properties for Stainless Steel
	EN 10027 Designation systems for steel. Steel names, principal symbols, Steel numbers
	EN 10079:1992- Definition of steel products
	EN 2516 – Aerospace series – Passivation of corrosion resisting steels and decontamination of nickel base alloys
	EN 10272 Elevated and Sub-zero Temperature Mechanical Properties of Stainless Steel
	British Standard Strength of Steel
	British USA Standards For Stainless Steel for Pressure Vessel Applications
	BS 3605 Chemical Composition of Stainless Steel
	BS 6744 Chemical Composition and Mechanical Properties of Stainless Steel
	BS 2871 Copper Tube Working Pressure Dimension
	EN 10088-2 Chemical Composition Stainless Steel
	EN 10088-3 Chemical Composition Stainless Steel
	EN 10217-5 / A1 Welded steel tubes for pressure purposes
	EN 10217-7 Ambient temperature mechanical properties
	EN 10217-7 Chemical Compositions of Stainless Steel Pipes
	EN 10216-5 Ambient temperature mechanical properties
	EN 10216-5 Chemical compositions of stainless steels
	EN 10216-5 Stainless Steel Tube
	EN 10253-3 and EN 10253-4 Ambient temperature mechanical properties
	EN 10253-3 and EN 10253-4 Chemical Composition of Stainless Steel
	EN 10217-5/A1 Welded steel tubes for pressure purposes
	EN 10217-7 Chemical compositions of stainless steels
	EN 10088-1 Elevated temperature physical properties of stainless steel
	EN 10088-1 Ambient temperature physical properties of stainless steel

EN Europaischen Normen European Standards

Related Articles