Zhejiang Guanyu Stainless Steel Tube Co., Ltd  
  Directory | Useful Tool | Sitemap | Contact US | Home

         

Standard

EN 10088-3 Mechanical Martensitic and Precipitation Hardening






EN 10088-3 gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes. The properties given in this article are proof strength, tensile strength, yield strength, elongation and hardness of martensitic and precipitation hardening stainless steel.

EN 10088-3 was originally published in 1995. The second, current version, EN 10088-3:2005, has superseded EN 10088-3:1995, which was withdrawn by BSi on 20th June 2005.

The tables shown here only have the 2005 tensile strength property ranges of the martensitic and precipitation hardening steels. Of the new grades added in the 2005 edition the following appear as bright bar

Special martensitic grade 1.4035

Special precipitation grade 1.4606

This article is specfically for bright products which were introduced in the 2005 edition.

EN 10088-3 mechanical properties - martensitic and precipitation hardening stainless steel bright bar including lengths cut from wire



Designation Max Thickness mm 1) Mechanical properties min unless stated
Annealed Heat Treated
Steel name Steel Tensile
strength RmN/mm2
  max
Hardness HB max2) Heat Treatment Condition Proof strength Rp0.2
N/mm2
Tensile strength Rm
N/mm2
Elon
A %
Standard Martensitic Grades
X12Cr13 1.4006 104) 880 280 QT650 550 700/1000 9
10<16 880 280 500 700/1000 9
16<40 800 250 450 650/930 10
40<63 760 230 450 650/880 10
63<160 730 220 450 650/850 15
X12CrS13 1.4005 104) 880 280 QT650 550 700/1000 8
10<16 880 280 500 700/1000 8
16<40 800 250 450 650/930 10
40<63 760 230 450 650/880 10
63<160 730 220 450 650/850 12
X20Cr13 1.4021 104) 910 290 QT700 600 750/1000 8
10<16 910 290 550 750/1000 8
16<40 850 260 500 700/950 10
40<63 800 250 500 700/900 12
63<160 760 230 500 700/850 13
X30Cr13 1.4028 104) 950 305 QT850 700 900/1050 7
10<16 950 305 650 900/1150 7
16<40 900 280 650 850/1100 9
40<63 840 260 650 850/1050 9
63<160 800 245 650 850/1000 10
X39Cr13 1.4031 104) 950 305 QT800 700 850/1100 7
10<16 950 305 700 850/1100 7
16<40 900 280 650 800/1050 8
40<63 840 260 650 800/1000 8
63<160 800 245 650 800/1000 10
X46Cr13 1.4034 104) 950 305 QT850 700 900/1150 7
10<16 950 305 700 900/1150 7
16<40 900 280 650 850/1100 8
40<63 840 260 650 850/1000 8
63<160 800 245 650 850/1000 10
X14CrMoS17 1.4104 104) 880 280 QT650 580 700/980 7
10<16 880 280 530 700/980 7
16<40 800 250 500 650/930 9
40<63 760 230 500 650/880 10
63<160 730 220 500 650/850 10
X39CrMo17-1 1.4122 104) 1000 340 QT750 650 800/1050 8
10<16 1000 340 600 800/1050 8
16<40 980 310 550 800/1000 10
40<63 930 290 550 750/950 12
63<160 900 280 550 750/950 12
X17CrNi16-2 1.4057 104) 1050 330 QT800 750 850/1100 7
10<16 1050 330 700 850/1100 7
16<40 1000 310 650 800/1050 9
40<63 950 295 650 800/1000 12
63<160 950 295 650 800/950 12
X4CrNiMo16-5-1 1.4418 104) 1150 380 QT900 750 900/1150 10
10<16 1150 380 750 900/1150 10
16<40 1100 320 700 900/1100 12
40<63 1100 320 700 900/1100 16
63<160 1100 320 700 900/1100 16
160<250 1100 320 700 900/1100 14
Special Martensitic Grades
X29CrS13 1.4029 104) 950 305 QT850 750 900/1100 8
10<16 950 305 700 900/1100 8
16<40 900 280 650 850/1100 10
40<63 840 260 650 850/1050 10
63<160 800 245 650 850/1000 12
X46CrS13 1.4035 104) 880 280 - - - -
10<16 880 280 - - -
16<40 800 250 - - -
40<63 760 230 - - -
Standard Precipitation Hardening Grades
X5CrNiCuNb16-4 1.4542 104) 1200 360 P800 600 900/1100 10
10<16 1200 360 600 900/1100 10
16<40 1200 360 520 800/1050 12
40<63 1200 360 520 800/1000 18
63<160 1200 360 520 800/950 18
<100 - - P930 720 930/1100 12
<100 - - P960 790 960/1160 10
<100 - - P1070 1000 1070/1270 10
Special Precipitation Hardening Grades
X5NiCrTiMoVB25-15-2 1.4606 104) 850 240 P880 750 950/1200 15
10<16 800 230 750 950/1150 15
16<40 800 230 600 900/1150 18
40<63 700 212 550 880/1150 20

Note
  1. Width across flats for hexagons.
  2. For information only.
  3. Elongation is valid only for dimensions of 5mm and above. For smaller diameters, the minimum elongation has to agreed upon at the time of the enquiry and order
  4. In the range 1mm<<5mm valid only for rounds. The mechanical properties of non round bars with thicknesses < 5mm have to be agreed at the time of the enquiry and order
  Stainless Steel Tube/Pipe/Tubing, Nickel Alloy Tubing, Brass Alloy Tubing, Copper Nickel Pipe Material Grades



EN 10088-3 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Related References:
1. EN 10088-3 Mechanical Properties of Martensitic Precipitation
2. EN 10088-3 Mechanical properties austenitic stainless steel bar
3. EN 10088-3 Mechanical Properties of Duplex Stainless Steel Bar
4. EN 10088-3 Duplex Steel Long Products Mechanical Properties
5. EN 10088-3 Mechanical Properties of Ferritic Stainless Steel
6. EN 10088-3 Mechanical properties austenitic stainless steel bar
7. EN 10088-3 Cold Worked Wire Mechanical Properties
8. EN 10088-3 Stainless Steel Long Products Grades
9. EN 10088-3 Mechanical Properties of ferritic steel long product
10. EN 10088-3 Mechanical Properties of Martensitic and Precipitation Hardening Stainless Steel Bright Bars
11. EN 10088-3 Mechanical of Martensitic and Precipitation Hardening Long Products
12. Permissible Analysis Tolerances on Cast Ranges in EN 10088-3


TubingChina.com All Rights Reserved

Directory | Standard | Heat | Heat Exchanger | Temperature | Pressure | Corrosion | Hardness | Surface | Properties | Select Stainless Steel | Contact US

Useful Tools:

Stainless Steel Weight Calculator
Metals Weight Calculator
Nickel Alloy Weight Calculator
Copper Brass Alloy Weight Calculator
Copper Brass Alloy Sheet Plate Weight Calculator
Sheet Plate Weight Calculator
Hardness Conversion Calculator
Hardness Conversion Chart
Rockwell Brinell Vickers Shore Hardness Conversion Chart
Conversion Calculator
Length Weight Temperature Volume Pressure Calculater
Pipe Working Pressure Calculator
Pressure Conversion Converter
Round Bar Size Calculator
Gauge Sizes
Sheet Metal Gauge
Pipe Schedule
Nominal Pipe Size
ANSI Pipe Chart
Inch to mm Chart
Stainless Steel Pipe Sizes
Stainless Steel Tubing Sizes Chart
Stainless Steel L H Grade
Stainless Steel Density
Conversion of Stainless Steel
Nickel Alloy Grades Comparison Material Grade Chart Carbon Steel
Structural Steel Comparison Chart



Main Products:

BA Tube | AP Tube
Condenser Tubes Tubing
Stainless Steel Reheater Tube Superheater Tubes
Stainless Steel U bend Tube
Nickel Alloy U bend Tubes
Copper Alloy U Bend Tubes
Heat Exchanger Tube
Super Duplex Pipe
Nickel Alloy Tube
Brass Alloy Tubing
Copper Nickel Alloys Tubes
Stainless Steel Hollow Tube
Stainless Steel Oval Tubing
Stainless Steel Square Tubing
Stainless Steel Rectangular Tubing
Stainless Steel Capillary Tube
Duplex Stainless Steel Pipe
Seamless Stainless Steel Tubing
Corrugated Stainless Steel Tubing
Stainless Steel Twisted Tube
Polishing Stainless Steel Tubing
Stainless Steel Aircraft Tube
Stainless Steel Hydraulic Tubing
Stainless Steel Instrumentation Tubing
Stainless Steel Angle Iron Bar
Stainless Steel Mechanical Tube
Bright Annealing Stainless Tube
Heat resistant Stainless Steel
Stainless Steel Welded Pipe
Extruded Serrated Finned Tubes Integral Finned Tubes / Extruded Aluminum Finned Tubes
Brass Alloys Copper Nickel Alloy Integral Low Finned Tubes
HFW High Frequency Welded Helical Spiral Serrated Finned Tubes
Corrosion Resistant Stainless Steel
Corrosion Resistance Stainless Steel

Stainless Steel Tubing Pipe

304 Stainless Steel Pipe
304L Stainless Steel Pipe
304H Stainless Steel Pipe
304/304L Stainless Steel Tubing
309S Stainless Steel Pipe
310S Stainless Steel Pipe
316L Stainless Steel Tubing
316Ti Stainless Steel Tube
317L Stainless Steel Pipe
321 321H Stainless Steel
347 347H Stainless Steel
904L N08094 Seamless Tubes
17-4 PH 630 UNS S17400 Stainless Steel
253MA S30815 Stainless Steel Tube
S31254 254 SMO Pipe
S31803 Stainless Steel
2205 Duplex Pipe Tubing
S32101 Stainless Steel
S32304 Stainless Steel
2507 Super Duplex Pipe
S32750 Super Duplex Pipe
S32760 Super Duplex Steel
1.4462 Stainless Steel Pipe
ASTM A213 | ASTM A269
ASTM A312 | ASTM A511
ASTM A789 | ASTM A790
ASTM B161 / ASME SB 161 | ASTM B111
EN 10216-5
ASTM A789 ASME SA 789 S31803 S32205 S32101 S32750 S32760 S32304 S31500 S31260 Seamless Tubes
EN 10216-5 1.4462 1.4362 1.4162 1.4410 1.4501 Seamless Tubes
Nickel Alloy Tubing:

UNS N08020 Alloy 20 Tubing
UNS N02200 Alloy 200 Tube
UNS N02201 Alloy 201 Pipe
UNS N04400 Monel 400 Tubing
N06600 Inconel 600 Tube
N06601 Inconel 601 Tubing
N06625 Inconel 625 Tubes
N08800 Incoloy 800 Tube
N08810 Incoloy 800H Tube
N08811 Incoloy 800HT Tubing
UNS N08825 Incoloy 825 Pipe
ASTM B622 N10276 C276 Tubing
ASTM B622 N06022 Hastelloy C-22 Alloy Tubes
C28000 Brass Seamless Tubes C44300 Brass Seamless Tubes
C68700 Brass Seamless Tubes
C70600 Copper Nickel Tubes
C71500 Copper Nickel Tubes
DIN 2391 Seamless Precision Steel Tubes
EN 10305-1 E215 E235 E355 Seamless Precision Steel Tube Tubing Tubes
DIN 2393 St28 St34.2 St37.2 St44.2 St52.3 Welded Precision Steel Tubes
EN 10305-2 E195 E235 E355 Welded Cold Drawn Precision Steel Tube