Zhejiang Guanyu Stainless Steel Tube Co., Ltd  
  Directory | Useful Tool | Sitemap | Contact US | Home

         
DIRECTORY
ABOUT US
ABOUT STAINLESS
PRODUCTS
Stainless Steel Products
Standard Specification
Stainless Pipe Dimensions
Material Grades
Chemical Composition
Mechanical Properties
Technology Flow chart
Range of Applications
QUALIFICATION
EQUIPMENT
Producing Equipment
Testing Equipment
QUALITY&SERVICE
Quality Control
Service
METALS ENGINEERING
Request for Quotation
CONTACT US

Martensitic Martensite Stainless Steel

EN 10269 EN10302 EN10088-1 DIN17240 1.4913 X19CrMoNbVN11-1 Stainless Steel








EN 10269 EN10302 EN10088-1 DIN17240 1.4913 X19CrMoNbVN11-1 Stainless Steel is martensitic stainless steel for forming into stainless steel wrought products, known as Wrought Martensitic Creep-Resisting Stainless Steel. The use purpose of 1.4913 stainless steel is similar to 1.4938 stainless steel.

1.4913 Stainless Steel Standard Specification:

EN 10302 Creep resisting steels, nickel and cobalt alloys
EN 10269 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10088-1 Stainless steels. List of stainless steels
DIN 17240 Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications


EN10088-1 1.4913 X19CrMoNbVN11-1 Stainless Steel Physical Properties

Grade Density g/cm³ Elastic Modulus at
Gpa		 Mean Coefficient of Thermal
Expansion between 20°C and 		Thermal Conductivity at 20°C (W/m.K) Specific Thermal Capacity at 20°C (J/kg.K) Electrical Resistivity at 20°C
(Ω.m²/m)
20°C 100°C 200°C 100°C 200°C 300°C 400°C 500°C 600°C
1.4913 7.7 216 209 200 10.5 10.9 11.3 11.6 12.0 12.2 24 460 -

EN10269 1.4913 X19CrMoNbVN11-1 Stainless Steel Mechanical Properties
Designation Max dia. mm Minimum proof strength Rp0.2 N/mm2 at a temperature of (°C)
Steel name Steel No. 50 100 150 200 250 300 350 400 450 500 550 600 650
Steel for quenching and tempering
X19CrMoNbVN11-1 1.4913 160 726 701 676 651 643 627 610 577 544 495 412 305 -

Yield Strength
Rp0.2 (MPa)		 Tensile Strength
Rm (MPa)		 Impact
KV/Ku ( J )		 Elongation
A  (%)		 Reduction in
cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell Hardness (HBW) max
750 900/1050 24 12.0 40 Solution and Aging, Annealing, Ausaging, Q+T,etc 302

EN10269 1.4913 X19CrMoNbVN11-1 Stainless Steel Chemical Composition
Designation Chemical Composition (% by mass - max unless stated)
Steel name Steel number C Si Mn P max S max Al tot B Cr Mo Ni V Other
Steels for quenching and tempering
X19CrMoNbVN11-1 1.4913 0.17
/0.23		 0.50 0.40
/0.90		 0.025 0.015 0.02 0.0015 10.00
/11.50		 0.50
/0.80		 0.20
/0.60		 0.10
/0.30		 Nb 
0.25
/0.55:
N 
0.05
/0.10

1.4913 Stainless Steel is usually produced by AOD/VIM/VOD and followed by electroslag refining (ESR) if necessary for special purpose.

Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements. Bars are usually supplied bright in the solution annealing condition.

Final heat treatment - heat treatment / QT / solution treatment
Steel number Heat Treatment Symbol Quench/Anneal Temperature Cooling Temper Temperature
1.4913 Quenched and Tempered 1100°C /1130 °C air, oil 670°C /720 °C


EN10269 1.4913 X19CrMoNbVN11-1 Stainless Steel Size Availability
Steel Grade Specification Processing Range (mm)
1.4913 Stainless Steel Round Bar and Hollow Bar Φ1 to Φ2000mm
Square and Flat Steel Φ10 to Φ100mm
Plate and Sheet 0.08-800 (Length)×10-1500(Width)×Thickness
Tubing or Pipe OD:Φ4-410, Wall Thickness:1-35 mm, Lenght:10-12000mm
Coil and Strip Steel Thickness:0.1mm Width:1500mm
Forging Rings / Cylindrical / Disks


Wrought Stainless Steel

  Stainless Steel Tube/Pipe/Tubing, Nickel Alloy Tubing, Brass Alloy Tubing, Copper Nickel Pipe Material Grades


EN10269 1.4913 X19CrMoNbVN11-1Stainless Steel Tubing Size range:
Size:1/4″ × 0.035″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:3/8″ × 0.035″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:1/2″ × 0.035″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:5/8″ × 0.035″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:3/4″ × 0.035″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:1″ × 0.035″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:5/16″ × 0.035″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:1/4″ × 0.049″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:3/8″ × 0.049″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:1/2″ × 0.049″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:5/8″ × 0.049″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:3/4″ × 0.049″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:1″ × 0.049″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:1/4″ × 0.065″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:3/8″ × 0.065″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:1/2″ × 0.065″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:5/8″ × 0.065″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:3/4″ × 0.065″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:1″ × 0.065″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 
Size:1″ × 0.120″ 
EN 10302 EN10269 EN 10088-1 DIN 17240 1.4913 X19CrMoNbVN11-1 Stainless Steel Tubing and Pipes 

Related References:
EN 10269 Chemical Compositions of Stainless Steel
EN 10269 Elevated and Sub-Zero Temperature Mechanical Properties
EN 10269 Room Temperature Mechanical Properties of Stainless Steel
Martensitic and Precipitation Hardening Steel Comparison Table
Martensitic Stainless Steel for Knife Applications – Part 1: Fe-Cr-C

TubingChina.com All Rights Reserved

Directory | Standard | Heat | Heat Exchanger | Temperature | Pressure | Corrosion | Hardness | Surface | Properties | Select Stainless Steel | Contact US

Useful Tools:

Stainless Steel Weight Calculator
Metals Weight Calculator
Nickel Alloy Weight Calculator
Copper Brass Alloy Weight Calculator
Copper Brass Alloy Sheet Plate Weight Calculator
Sheet Plate Weight Calculator
Hardness Conversion Calculator
Hardness Conversion Chart
Rockwell Brinell Vickers Shore Hardness Conversion Chart
Conversion Calculator
Length Weight Temperature Volume Pressure Calculater
Pipe Working Pressure Calculator
Pressure Conversion Converter
Round Bar Size Calculator
Gauge Sizes
Sheet Metal Gauge
Pipe Schedule
Nominal Pipe Size
ANSI Pipe Chart
Inch to mm Chart
Stainless Steel Pipe Sizes
Stainless Steel Tubing Sizes Chart
Stainless Steel L H Grade
Stainless Steel Density
Conversion of Stainless Steel
Nickel Alloy Grades Comparison Material Grade Chart Carbon Steel
Structural Steel Comparison Chart


Main Products:

BA Tube | AP Tube
Condenser Tubes Tubing
Stainless Steel Reheater Tube Superheater Tubes
Stainless Steel U bend Tube
Nickel Alloy U bend Tubes
Copper Alloy U Bend Tubes
Heat Exchanger Tube
Super Duplex Pipe
Nickel Alloy Tube
Brass Alloy Tubing
Copper Nickel Alloys Tubes
Stainless Steel Hollow Tube
Stainless Steel Oval Tubing
Stainless Steel Square Tubing
Stainless Steel Rectangular Tubing
Stainless Steel Capillary Tube
Duplex Stainless Steel Pipe
Seamless Stainless Steel Tubing
Corrugated Stainless Steel Tubing
Stainless Steel Twisted Tube
Polishing Stainless Steel Tubing
Stainless Steel Aircraft Tube
Stainless Steel Hydraulic Tubing
Stainless Steel Instrumentation Tubing
Stainless Steel Angle Iron Bar
Stainless Steel Mechanical Tube
Bright Annealing Stainless Tube
Heat resistant Stainless Steel
Stainless Steel Welded Pipe
Extruded Serrated Finned Tubes Integral Finned Tubes / Extruded Aluminum Finned Tubes
Brass Alloys Copper Nickel Alloy Integral Low Finned Tubes
HFW High Frequency Welded Helical Spiral Serrated Finned Tubes
Corrosion Resistant Stainless Steel
Corrosion Resistance Stainless Steel

 		Stainless Steel Tubing Pipe

304 Stainless Steel Pipe
304L Stainless Steel Pipe
304H Stainless Steel Pipe
304/304L Stainless Steel Tubing
309S Stainless Steel Pipe
310S Stainless Steel Pipe
316L Stainless Steel Tubing
316Ti Stainless Steel Tube
317L Stainless Steel Pipe
321 321H Stainless Steel
347 347H Stainless Steel
904L N08094 Seamless Tubes
17-4 PH 630 UNS S17400 Stainless Steel
253MA S30815 Stainless Steel Tube
S31254 254 SMO Pipe
S31803 Stainless Steel
2205 Duplex Pipe Tubing
S32101 Stainless Steel
S32304 Stainless Steel
2507 Super Duplex Pipe
S32750 Super Duplex Pipe
S32760 Super Duplex Steel
1.4462 Stainless Steel Pipe
ASTM A213 | ASTM A269
ASTM A312 | ASTM A511
ASTM A789 | ASTM A790
ASTM B161 / ASME SB 161 | ASTM B111
EN 10216-5
ASTM A789 ASME SA 789 S31803 S32205 S32101 S32750 S32760 S32304 S31500 S31260 Seamless Tubes
EN 10216-5 1.4462 1.4362 1.4162 1.4410 1.4501 Seamless Tubes		 Nickel Alloy Tubing:

UNS N08020 Alloy 20 Tubing
UNS N02200 Alloy 200 Tube
UNS N02201 Alloy 201 Pipe
UNS N04400 Monel 400 Tubing
N06600 Inconel 600 Tube
N06601 Inconel 601 Tubing
N06625 Inconel 625 Tubes
N08800 Incoloy 800 Tube
N08810 Incoloy 800H Tube
N08811 Incoloy 800HT Tubing
UNS N08825 Incoloy 825 Pipe
ASTM B622 N10276 C276 Tubing
ASTM B622 N06022 Hastelloy C-22 Alloy Tubes
C28000 Brass Seamless Tubes C44300 Brass Seamless Tubes
C68700 Brass Seamless Tubes
C70600 Copper Nickel Tubes
C71500 Copper Nickel Tubes
DIN 2391 Seamless Precision Steel Tubes
EN 10305-1 E215 E235 E355 Seamless Precision Steel Tube Tubing Tubes
DIN 2393 St28 St34.2 St37.2 St44.2 St52.3 Welded Precision Steel Tubes
EN 10305-2 E195 E235 E355 Welded Cold Drawn Precision Steel Tube