EN 10088-3 Duplex Steel Long Products Mechanical Properties
EN 10088-3 show the mechanical properties of stainless steel semi-finished products, bars, rods and sections for general purposes. This covers austenitic-ferritic duplex stainless steel. The properties include proof strength, tensile strength, yield strength, elongation and hardness.
EN 10088-3 was originally published in 1995. The second, current version, EN 10088-3:2005, has superseded EN 10088-3:1995, which was withdrawn by BSi on 20th June 2005.
The tables shown here only have the 2005 tensile strength properties ranges of the austenitic-ferritic duplex steel. Two new special grades have been added: 1.4477, 1.4424
This article does not include bright products. These were introduced in the 2005 edition.
EN 10088-3 mechanical properties - austenitic-ferritic duplex stainless steel
| Designation |
Mechanical properties min unless stated |
| Steel name |
Steel number |
Max thickness d mm |
Proof strength Rp0.22) N/mm2 |
Tensile strength Rm2) N/mm2 |
Elongation A2) % |
Max hardness1)HB |
| Austenitic-ferritic stainless steel-standard grades |
| X3CrNiMoN27-5-2 |
1.4460 |
160 |
450 |
620/880 |
20 |
260 |
| X2CrNiMoN22-5-3 |
1.4462 |
160 |
450 |
650/880 |
25 |
270 |
| Austenitic-ferritic stainless steel-special grades |
| X2CrNiN23-4 |
1.4362 |
160 |
400 |
600/830 |
25 |
260 |
| X2CrNiMoN29-7-2 |
1.4477 |
10 |
650 |
800/1050 |
25 |
310 |
| 10<d<160 |
550 |
750/1000 |
25 |
310 |
| X2CrNiMoCuN25-6-3 |
1.4507 |
160 |
500 |
700/900 |
25 |
270 |
| X2CrNiMoN25-7-4 |
1.4410 |
160 |
530 |
730/930 |
25 |
290 |
| X2CrNiMoCuWN25-7-4 |
1.4501 |
160 |
530 |
730/930 |
25 |
290 |
| X2CrNiMoSi18-5-3 |
1.4424 |
50 |
450 |
700/900 |
25 |
260 |
| 50<d<160 |
400 |
680/900 |
25 |
260 |
These austenitic-ferritic duplex stainless steel are in the solution-annealed condition. The solution treatment may be omitted, if the conditions for hot working and subsequent cooling are such that the requirements for the mechanical properties of the product and the resistance to intergranular corrosion as defined in EN ISO 3651-2 are obtained.
 EN 10088-3 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Related References:
1. EN 10088-3 Mechanical Properties of Martensitic Precipitation
2. EN 10088-3 Mechanical properties austenitic stainless steel bar
3. EN 10088-3 Mechanical Properties of Duplex Stainless Steel Bar
4. EN 10088-3 Duplex Steel Long Products Mechanical Properties
5. EN 10088-3 Mechanical Properties of Ferritic Stainless Steel
6. EN 10088-3 Mechanical properties austenitic stainless steel bar
7. EN 10088-3 Cold Worked Wire Mechanical Properties
8. EN 10088-3 Stainless Steel Long Products Grades
9. EN 10088-3 Mechanical Properties of ferritic steel long product
10. EN 10088-3 Mechanical Properties of Martensitic and Precipitation Hardening Stainless Steel Bright Bars
11. EN 10088-3 Mechanical of Martensitic and Precipitation Hardening Long Products
12. Permissible Analysis Tolerances on Cast Ranges in EN 10088-3
|
