EN 10130 Cold Rolled Low-carbon steel flat for cold forming
The standard covers cold-rolled not coated low-carbon steel flat products in rolled widths equal to or over 600mm for cold forming with minimum thickness of 0,36mm and generally less than 3mm thicknes. The material is supplied in sheet, coil, slit coil or cut lengths -from slit coils or sheet
The information to be supplied by the purchases includes
a) The word sheet, coil,slit coil or cutting length
b) The reference of this Standard BS EN 10130 + A1
c) The grade e.g DC followed by 01, 03, 04, 05 or 06 according to EN 10027-1 and other documents as relevant
or the number according to EN 10027-2.
d) The symbol referencing the required surface quality (A or B)
e) If necessary the symbol relating to the surface finish. (b = Bright, g = semi-bright, m = normal, r = rough.
Example: sheet EN 10130+A1 -DC02 - A - m
Tables identifying composition,yield strength and tensile strength at room temperature are provided on webpage EN-10130
Table of steel included in EN 10130:1999
| Name |
Number |
Name |
Number |
Name |
Number |
Name |
Number |
Name |
Number |
| DC01 |
1.0330 |
DC03 |
1.0347 |
DC04 |
1.0338 |
DC05 |
1.0312 |
DC06 |
1.0873 |
|
