EN 10088-3 Mechanical Martensitic and Precipitation Hardening
EN 10088-3 gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes. The properties given in this article are proof strength, tensile strength, elongation and hardness of martensitic and precipitation hardening stainless steel.
EN 10088-3 was originally published in 1995. The second, current version, EN 10088-3:2005, has superseded EN 10088-3:1995, which was withdrawn by BSi on 20th June 2005.
The tables shown here only have the 2005 tensile strength properties ranges of the martensitic and precipitation hardening steel. Of the new grades added in the 2005 edition the following appear as bright bar
Special martensitic stainless steel grade 1.4035
Special precipitation hardening grade 1.4606
This article is specfically for bright products which were introduced in the 2005 edition.
N 10088-3 mechanical properties - martensitic and precipitation hardening stainless steel bright bar including lengths cut from wire.
Designation |
Max Thickness mm 1) |
Mechanical properties min unless stated |
Annealed |
Heat Treated |
Steel name |
Steel number |
Tensile
strength Rm
N/mm2
max |
Hardness HB max2) |
Heat Treatment Condition |
Proof strength Rp
0.2N/mm2 |
Tensile strength Rm
N/mm2 |
Elon
gation
A %3) |
Standard Martensitic Grades |
X12Cr13 |
1.4006
/410 |
104) |
880 |
280 |
QT650 |
550 |
700/1000 |
9 |
10<16 |
880 |
280 |
500 |
700/1000 |
9 |
16<40 |
800 |
250 |
450 |
650/930 |
10 |
40<63 |
760 |
230 |
450 |
650/880 |
10 |
63<160 |
730 |
220 |
450 |
650/850 |
15 |
X12CrS13 |
1.4005
/416 |
104) |
880 |
280 |
QT650 |
550 |
700/1000 |
8 |
10<16 |
880 |
280 |
500 |
700/1000 |
8 |
16<40 |
800 |
250 |
450 |
650/930 |
10 |
40<63 |
760 |
230 |
450 |
650/880 |
10 |
63<160 |
730 |
220 |
450 |
650/850 |
12 |
X20Cr13 |
1.4021
/420 |
104) |
910 |
290 |
QT700 |
600 |
750/1000 |
8 |
10<16 |
910 |
290 |
550 |
750/1000 |
8 |
16<40 |
850 |
260 |
500 |
700/950 |
10 |
40<63 |
800 |
250 |
500 |
700/900 |
12 |
63<160 |
760 |
230 |
500 |
700/850 |
13 |
X30Cr13 |
1.4028
/420F |
104) |
950 |
305 |
QT850 |
700 |
900/1050 |
7 |
10<16 |
950 |
305 |
650 |
900/1150 |
7 |
16<40 |
900 |
280 |
650 |
850/1100 |
9 |
40<63 |
840 |
260 |
650 |
850/1050 |
9 |
63<160 |
800 |
245 |
650 |
850/1000 |
10 |
X39Cr13 |
1.4031 |
104) |
950 |
305 |
QT800 |
700 |
850/1100 |
7 |
10<16 |
950 |
305 |
700 |
850/1100 |
7 |
16<40 |
900 |
280 |
650 |
800/1050 |
8 |
40<63 |
840 |
260 |
650 |
800/1000 |
8 |
63<160 |
800 |
245 |
650 |
800/1000 |
10 |
X46Cr13 |
1.4034 |
104) |
950 |
305 |
QT850 |
700 |
900/1150 |
7 |
10<16 |
950 |
305 |
700 |
900/1150 |
7 |
16<40 |
900 |
280 |
650 |
850/1100 |
8 |
40<63 |
840 |
260 |
650 |
850/1000 |
8 |
63<160 |
800 |
245 |
650 |
850/1000 |
10 |
X14CrMoS17 |
1.4104
/430F |
104) |
880 |
280 |
QT650 |
580 |
700/980 |
7 |
10<16 |
880 |
280 |
530 |
700/980 |
7 |
16<40 |
800 |
250 |
500 |
650/930 |
9 |
40<63 |
760 |
230 |
500 |
650/880 |
10 |
63<160 |
730 |
220 |
500 |
650/850 |
10 |
X39CrMo17-1 |
1.4122 |
104) |
1000 |
340 |
QT750 |
650 |
800/1050 |
8 |
10<16 |
1000 |
340 |
600 |
800/1050 |
8 |
16<40 |
980 |
310 |
550 |
800/1000 |
10 |
40<63 |
930 |
290 |
550 |
750/950 |
12 |
63<160 |
900 |
280 |
550 |
750/950 |
12 |
X17CrNi16-2 |
1.4057
/431 |
104) |
1050 |
330 |
QT800 |
750 |
850/1100 |
7 |
10<16 |
1050 |
330 |
700 |
850/1100 |
7 |
16<40 |
1000 |
310 |
650 |
800/1050 |
9 |
40<63 |
950 |
295 |
650 |
800/1000 |
12 |
63<160 |
950 |
295 |
650 |
800/950 |
12 |
X4CrNiMo16-5-1 |
1.4418 |
104) |
1150 |
380 |
QT900 |
750 |
900/1150 |
10 |
10<16 |
1150 |
380 |
750 |
900/1150 |
10 |
16<40 |
1100 |
320 |
700 |
900/1100 |
12 |
40<63 |
1100 |
320 |
700 |
900/1100 |
16 |
63<160 |
1100 |
320 |
700 |
900/1100 |
16 |
160<250 |
1100 |
320 |
700 |
900/1100 |
14 |
Special Martensitic Grades |
X29CrS13 |
1.4029 |
104) |
950 |
305 |
QT850 |
750 |
900/1100 |
8 |
10<16 |
950 |
305 |
700 |
900/1100 |
8 |
16<40 |
900 |
280 |
650 |
850/1100 |
10 |
40<63 |
840 |
260 |
650 |
850/1050 |
10 |
63<160 |
800 |
245 |
650 |
850/1000 |
12 |
X46CrS13 |
1.4035 |
104) |
880 |
280 |
- |
- |
- |
- |
10<16 |
880 |
280 |
- |
- |
- |
16<40 |
800 |
250 |
- |
- |
- |
40<63 |
760 |
230 |
- |
- |
- |
Standard Precipitation Hardening Grades |
X5CrNiCuNb16-4 |
1.4542
/630 |
104) |
1200 |
360 |
P800 |
600 |
900/1100 |
10 |
10<16 |
1200 |
360 |
600 |
900/1100 |
10 |
16<40 |
1200 |
360 |
520 |
800/1050 |
12 |
40<63 |
1200 |
360 |
520 |
800/1000 |
18 |
63<160 |
1200 |
360 |
520 |
800/950 |
18 |
<100 |
- |
- |
P930 |
720 |
930/1100 |
12 |
<100 |
- |
- |
P960 |
790 |
960/1160 |
10 |
<100 |
- |
- |
P1070 |
1000 |
1070/1270 |
10 |
Special Precipitation Hardening Grades |
X5NiCrTiMoVB25-15-2 |
1.4606 |
104) |
850 |
240 |
P880 |
750 |
950/1200 |
15 |
10<16 |
800 |
230 |
750 |
950/1150 |
15 |
16<40 |
800 |
230 |
600 |
900/1150 |
18 |
40<63 |
700 |
212 |
550 |
880/1150 |
20 |
Note
- Width across flats for hexagons.
- For information only.
- Elongation is valid only for dimensions of 5mm and above. For smaller diameters, the minimum elongation has to agreed upon at the time of the enquiry and order
- In the range 1mm<<5mm valid only for rounds. The mechanical properties of non round bars with thicknesses < 5mm have to be agreed at the time of the enquiry and order
EN 10088-3 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Related References:
1. EN 10088-3 Mechanical Properties of Martensitic Precipitation
2. EN 10088-3 Mechanical properties austenitic stainless steel bar
3. EN 10088-3 Mechanical Properties of Duplex Stainless Steel Bar
4. EN 10088-3 Duplex Steel Long Products Mechanical Properties
5. EN 10088-3 Mechanical Properties of Ferritic Stainless Steel
6. EN 10088-3 Mechanical properties austenitic stainless steel bar
7. EN 10088-3 Cold Worked Wire Mechanical Properties
8. EN 10088-3 Stainless Steel Long Products Grades
9. EN 10088-3 Mechanical Properties of ferritic steel long product
10. EN 10088-3 Mechanical Properties of Martensitic and Precipitation Hardening Stainless Steel Bright Bars
11. EN 10088-3 Mechanical of Martensitic and Precipitation Hardening Long Products
12. Permissible Analysis Tolerances on Cast Ranges in EN 10088-3
|