| Std Number |
Date |
Status |
Title |
| Tolerances and surfaces |
| EN 10029 |
1991 |
C |
Tolerances on Dimensions, Shape and Mass for Hot Rolled Steel Plates 3mm Thick or Above |
| EN 10048 |
1997 |
C |
Hot Rolled Narrow Steel Strip - Tolerances on Dimensions and Shape |
| EN 10051 |
1992 |
C |
Continuously Hot-Rolled Uncoated Plate, Sheet and Strip of Non-Alloy and Alloy Steels - Tolerances on Dimensions and Shape |
| EN 10058 |
2003 |
C |
Hot Rolled Flat Steel Bars for General Purposes - Dimensions and Tolerances on Shape and Dimensions |
| EN 10059 |
2003 |
C |
Hot Rolled Square Steel Bars for General Purposes - Dimensions and Tolerances on Shape and Dimensions |
| EN 10060 |
2003 |
C |
Hot Rolled Round Steel Bars for General Purposes - Dimensions and Tolerances on Shape and Dimensions |
| EN 10061 |
2003 |
C |
Hot Rolled Hexagon Steel Bars for General Purposes - Dimensions and Tolerances on Shape and Dimensions |
| EN 10258 |
1997 |
C |
Cold Rolled Stainless Steel Narrow Strip and Cut Lengths - Tolerances on Dimensions and Shape |
| EN 10259 |
1997 |
C |
Cold Rolled Stainless Steel Wide Strip and Plate/Sheet Tolerances on Dimensions and Shape |
| EN 10278 |
1999 |
C |
Dimensions and Tolerances of Bright Steel Products |
| ENISO 1127 |
1997 |
C |
Stainless Steel Tubes - Dimensions, Tolerances and Conventional Masses Per Unit Length |
| BS 1134-1 |
1988 |
C |
Assessment of Surface Texture-Methods & Instrumentation |
| Passivation and cleaning |
| EN 2516 |
1997 |
C |
Passivation of Corrosion Resisting Steels and Decontamination of Nickel Base Alloys |
| ISO 15730 |
2000 |
C |
Metallic and other Inorganic Coatings. Electropolishing as a Means of Smoothing and Passivating Stainless Steel |
| ASTM A380 |
- |
- |
Practice for Cleaning, Descaling and Passivation of Stainless Steel Parts, Equipment and Systems |
| ASTM A380ASTM A967 |
- |
- |
Specification for Chemical Passivation Treatments for Stainless Steel Parts |
| Testing |
| EN 10204 |
2004 |
C |
Metallic Products - Types of Inspection Documents |
| EN 10228-4 |
1999 |
C |
Non-Destructive Testing of Steel Forgings. Ultrasonic Testing of Austenitic and Austenitic-Ferritic Stainless Steel Forgings |
| EN 10307 |
2001 |
C |
Non-destructive testing. Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
| ENISO 3651 |
1998 |
C |
Determination of Resistance to Intergranular Corrosion of Stainless Steel |
| ISO 11408 |
1999 |
C |
Chemical Conversion Coatings - Black Oxide Coating on Iron and Steel - Specification and Test Methods |
| ISO 16701 |
2003 |
C |
Corrosion of Metals and Alloys-Corrosion in Artificial Atmosphere-Accelerated Corrosion Test Involving Exposure Under Controlled Conditions of Humidity Cycling and Intermittent Spraying of a Salt Solution |
