Zhejiang Guanyu Stainless Steel Tube Co., Ltd  
  Directory | Useful Tool | Sitemap | Contact US | Home

         

Properties

Seamless Steel Tube Standard








1. structure seamless steel pipes (GB/T8162-2008) is used for general structural and mechanical structure of seamless steel tubes.
2. fluid delivery with seamless steel pipe (GB/T8163-2008) is used for conveying water, oil, gas and other fluids generally seamless.
3. low and medium pressure boiler seamless pipe (GB3087-2008) is used in the manufacture of various structural low and medium pressure boiler superheated steam pipes, boiling water pipes and superheated steam locomotive boiler tubes and arch bricks of high quality carbon structural steel useful heat rolled and cold drawn (rolled) seamless.
4. high-pressure boiler seamless pipe (GB5310-2008) is used to manufacture high-pressure and more pressure on the water boiler heating surface with high-quality carbon steel, alloy steel and heat-resistant stainless steel seamless pipe.
5. fertilizers, equipment, high pressure seamless steel pipe (GB6479-2000) is applicable to operating temperature -40 ~ 400 Degree Centigrade, working pressure of 10 ~ 30Ma of chemical equipment and pipeline quality carbon structural steel and alloy steel seamless steel tubes.
6. petroleum cracking seamless steel pipe (GB9948-2006) is applied to the oil refinery furnace tubes, heat exchanger and pipe seamless steel pipe.
7. geological drilling steel (YB235-70) is for the use of the geological department of the steel core drilling, can be divided by use of drill pipe, drill collars, cores, sleeves and precipitation tubes.
8. diamond core drilling Seamless (GB3423-82) for diamond core drilling drill, core rods, seamless steel casing.
9. oil drilling pipe (YB528-65) is used to thicken the oil drilling within or outside the thick ends of the seamless steel tubes. Steel wire and non-sub-car wire two car, car connector wire useful links, no threading methods and tools useful butt joint connection.



10, the ship carbon steel seamless pipe (GB5213-85) is the manufacture of pressure vessels piping grade I, II grade pressure piping, boilers and Superheater carbon steel seamless pipe. Carbon steel seamless pipe wall temperature does not exceed 450 Degree Centigrade, alloy steel seamless steel pipe wall temperatures in excess of 450 Degree Centigrade.
11, automobile axle casing seamless pipe (GB3088-82) is the manufacture of automobile axle tube and axle shaft axle useful high-quality carbon structural steel and alloy steel hot-rolled seamless steel tube.
12, diesel high pressure oil pipe (GB3093-2002) is to create high-pressure diesel injection system useful in the cold drawn seamless steel tubes.
13, hydraulic and pneumatic cylinder seamless steel with precision internal diameter (GB8713-88) is a manufacturer of hydraulic and pneumatic cylinder with a diameter size with precision cold drawn or cold rolled precision seamless steel tubes.
14, drawn or rolled precision seamless pipe (GB3639-2000) is used for mechanical structure, hydraulic equipment, high dimensional accuracy and surface finish of a good cold-drawn or cold rolled precision seamless steel tubes. Use precision seamless steel pipe manufacturing equipment, mechanical or hydraulic structure can be significant savings in machining time while improving material utilization, and help to improve product quality.
15 Stainless steel seamless tubes (GB/T14975-2002) is widely used in chemical, petroleum, textile, medical, food, machinery and other industrial corrosion resistant pipes and structural parts and components made of hot rolled stainless steel ( extrusion, expansion) and cold drawn (rolled) seamless.
16, fluid transport stainless steel seamless pipe (GB/T14976-2002) is used for the transmission fluid made of hot-rolled stainless steel (extrusion, expansion) and cold drawn (rolled) seamless.
17, shaped seamless steel tube is in addition to other than the general cross-section shape of seamless steel tubes. By the different shape and size of pipe section can be divided into such shaped seamless steel pipe wall thickness (code-named D), ranging from shaped seamless steel pipe wall thickness (code-named BD), variable diameter shaped seamless steel pipe (code-named BJ). Shaped seamless steel pipe used in a variety of structural parts, tools and mechanical parts. And the tube compared to special section tube generally larger moment of inertia and section modulus, a larger bending and distorting ability, can significantly reduce the structural weight, saving steel.

   Stainless Steel Tubing, Nickel Alloy Tubing, Brass Alloy Tubing, Copper Nickel Pipe Material Grades


Pipes Tubes Plates Bars Square Tubes Weight Calculation Calculator
Conversion Calculator Calculation-Pressure|Weight|Temperature|Volume|Length
Pipe Working Pressure Calculation
Metals Weight Calculator Calculation

TubingChina.com All Rights Reserved

Directory | Standard | Heat | Heat Exchanger | Temperature | Pressure | Corrosion | Hardness | Surface | Properties | Select Stainless Steel | Contact US

Useful Tools:

Stainless Steel Weight Calculator
Metals Weight Calculator
Nickel Alloy Weight Calculator
Copper Brass Alloy Weight Calculator
Copper Brass Alloy Sheet Plate Weight Calculator
Sheet Plate Weight Calculator
Hardness Conversion Calculator
Hardness Conversion Chart
Rockwell Brinell Vickers Shore Hardness Conversion Chart
Conversion Calculator
Length Weight Temperature Volume Pressure Calculater
Pipe Working Pressure Calculator
Pressure Conversion Converter
Round Bar Size Calculator
Gauge Sizes
Sheet Metal Gauge
Pipe Schedule
Nominal Pipe Size
ANSI Pipe Chart
Inch to mm Chart
Stainless Steel Pipe Sizes
Stainless Steel Tubing Sizes Chart
Stainless Steel L H Grade
Stainless Steel Density
Conversion of Stainless Steel
Nickel Alloy Grades Comparison Material Grade Chart Carbon Steel
Structural Steel Comparison Chart



Main Products:

BA Tube | AP Tube
Condenser Tubes Tubing
Stainless Steel Reheater Tube Superheater Tubes
Stainless Steel U bend Tube
Nickel Alloy U bend Tubes
Copper Alloy U Bend Tubes
Heat Exchanger Tube
Super Duplex Pipe
Nickel Alloy Tube
Brass Alloy Tubing
Copper Nickel Alloys Tubes
Stainless Steel Hollow Tube
Stainless Steel Oval Tubing
Stainless Steel Square Tubing
Stainless Steel Rectangular Tubing
Stainless Steel Capillary Tube
Duplex Stainless Steel Pipe
Seamless Stainless Steel Tubing
Corrugated Stainless Steel Tubing
Stainless Steel Twisted Tube
Polishing Stainless Steel Tubing
Stainless Steel Aircraft Tube
Stainless Steel Hydraulic Tubing
Stainless Steel Instrumentation Tubing
Stainless Steel Angle Iron Bar
Stainless Steel Mechanical Tube
Bright Annealing Stainless Tube
Heat resistant Stainless Steel
Stainless Steel Welded Pipe
Extruded Serrated Finned Tubes Integral Finned Tubes / Extruded Aluminum Finned Tubes
Brass Alloys Copper Nickel Alloy Integral Low Finned Tubes
HFW High Frequency Welded Helical Spiral Serrated Finned Tubes
Corrosion Resistant Stainless Steel
Corrosion Resistance Stainless Steel

Stainless Steel Tubing Pipe

304 Stainless Steel Pipe
304L Stainless Steel Pipe
304H Stainless Steel Pipe
304/304L Stainless Steel Tubing
309S Stainless Steel Pipe
310S Stainless Steel Pipe
316L Stainless Steel Tubing
316Ti Stainless Steel Tube
317L Stainless Steel Pipe
321 321H Stainless Steel
347 347H Stainless Steel
904L N08094 Seamless Tubes
17-4 PH 630 UNS S17400 Stainless Steel
253MA S30815 Stainless Steel Tube
S31254 254 SMO Pipe
S31803 Stainless Steel
2205 Duplex Pipe Tubing
S32101 Stainless Steel
S32304 Stainless Steel
2507 Super Duplex Pipe
S32750 Super Duplex Pipe
S32760 Super Duplex Steel
1.4462 Stainless Steel Pipe
ASTM A213 | ASTM A269
ASTM A312 | ASTM A511
ASTM A789 | ASTM A790
ASTM B161 / ASME SB 161 | ASTM B111
EN 10216-5
ASTM A789 ASME SA 789 S31803 S32205 S32101 S32750 S32760 S32304 S31500 S31260 Seamless Tubes
EN 10216-5 1.4462 1.4362 1.4162 1.4410 1.4501 Seamless Tubes
Nickel Alloy Tubing:

UNS N08020 Alloy 20 Tubing
UNS N02200 Alloy 200 Tube
UNS N02201 Alloy 201 Pipe
UNS N04400 Monel 400 Tubing
N06600 Inconel 600 Tube
N06601 Inconel 601 Tubing
N06625 Inconel 625 Tubes
N08800 Incoloy 800 Tube
N08810 Incoloy 800H Tube
N08811 Incoloy 800HT Tubing
UNS N08825 Incoloy 825 Pipe
ASTM B622 N10276 C276 Tubing
ASTM B622 N06022 Hastelloy C-22 Alloy Tubes
C28000 Brass Seamless Tubes C44300 Brass Seamless Tubes
C68700 Brass Seamless Tubes
C70600 Copper Nickel Tubes
C71500 Copper Nickel Tubes
DIN 2391 Seamless Precision Steel Tubes
EN 10305-1 E215 E235 E355 Seamless Precision Steel Tube Tubing Tubes
DIN 2393 St28 St34.2 St37.2 St44.2 St52.3 Welded Precision Steel Tubes
EN 10305-2 E195 E235 E355 Welded Cold Drawn Precision Steel Tube