Zhejiang Guanyu Stainless Steel Tube Co., Ltd  
  Directory | Useful Tool | Sitemap | Contact US | Home

         

Standard

ASTM Standards A






AIIMASTM-BP-01-08 Portable Document Format-Healthcare (PDF) A Best Practices Guide
A1-00(2005) Standard Specification for Carbon Steel Tee Rails
A2-02(2008) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
A3-01(2006) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
A6/A6M-08 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A20/A20M-07 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A27/A27M-08 Standard Specification for Steel Castings, Carbon, for General Application
A29/A29M-05 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
A31-04e1 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A34/A34M-06 Standard Practice for Sampling and Procurement Testing of Magnetic Materials
A36/A36M-08 Standard Specification for Carbon Structural Steel
A36/A36M-08 Especificación Normalizada para Acero al Carbono Estructural
A47/A47M-99(2004) Standard Specification for Ferritic Malleable Iron Castings
A48/A48M-03(2008) Standard Specification for Gray Iron Castings
A49-01(2006) Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
A53/A53M-07 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A53/A53M-07 Especificación Normalizada para Parrillas Electrosoldadas de Barras Corrugadas de Acero de Refuerzo para Concreto


A65-07 Standard Specification for Steel Track Spikes
A66-07 Standard Specification for Steel Screw Spikes
A67-00(2005) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
A74-08 Standard Specification for Cast Iron Soil Pipe and Fittings
A82/A82M-07 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
A82/A82M-07 Especificación Normalizada para Alambre de Acero, Liso, para Refuerzo de Concreto
A90/A90M-07 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A99-03 Standard Specification for Ferromanganese
A100-07 Standard Specification for Ferrosilicon
A101-04 Standard Specification for Ferrochromium
A102-04 Standard Specification for Ferrovanadium
A105/A105M-05 Standard Specification for Carbon Steel Forgings for Piping Applications
A106/A106M-08 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A108-07 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A109/A109M-08 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A111-99a(2004)e1 Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
A116-05 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
A121-07 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
A123/A123M-08 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A125-96(2007) Standard Specification for Steel Springs, Helical, Heat-Treated
A126-04 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A128/A128M-93(2007) Standard Specification for Steel Castings, Austenitic Manganese
A131/A131M-08 Standard Specification for Structural Steel for Ships
A132-04 Standard Specification for Ferromolybdenum
A134 / A134M Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A135/A135M-06 Standard Specification for Electric-Resistance-Welded Steel Pipe
A139/A139M-04 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A143/A143M-07 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A144-04 Specification for Ferrotungsten
A146-04 Standard Specification for Molybdenum Oxide Products
A148/A148M-08 Standard Specification for Steel Castings, High Strength, for Structural Purposes
A153/A153M-05 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A159-83(2006) Standard Specification for Automotive Gray Iron Castings
ASTM A161 Standard Specification for Seamless Low-Carbon and Carbon-Molybdenum Steel Still Tubes for Refinery Service
A167-99(2004) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A176-99(2004) Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
ASTM A178/A178M-02 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A179/A179M Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Condenser and Heat-Exchanger Tubes
A181/A181M-06 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A182/A182M-08a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Services
A183-03 Standard Specification for Carbon Steel Track Bolts and Nuts
A184/A184M-06 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
A185/A185M-07 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
Especificación Normalizada para Refuerzo Electrosoldado de Alambre de Acero Liso, para Concreto
ASTM A192/A192M-02(2007) Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A193/A193M-08b Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M-08b Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A197/A197M-00(2006) Standard Specification for Cupola Malleable Iron
ASTM A199 Standard for Alloy Steel Heat Exchanger Tubes
ASTM A200 Standard for Seamless Alloy Steel Tube
A203/A203M-97(2007)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A204/A204M-03(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A209/A209M-03(2007) Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A210/A210M-02(2007) Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A213/A213M-08 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A214/A214M-96(2005) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A216/A216M-07 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A217/A217M-07 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A220/A220M-99(2004) Standard Specification for Pearlitic Malleable Iron
A225/A225M-03(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
A227/A227M-06 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A228/A228M-07 Standard Specification for Steel Wire, Music Spring Quality
A229/A229M-99(2005) Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
A230/A230M-05 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
A231/A231M-04 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
A232/A232M-05 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
ASTM A234/A234M-07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A239-95(2004) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A240/A240M-08 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A242/A242M-04e1 Standard Specification for High-Strength Low-Alloy Structural Steel
A242/A242M-04 Especificación Normalizada para Acero Estructural de Alta Resistencia y Baja Aleación
A247-06 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
ASTM A249/A249M-08 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
ASTM A250/A250M-05 Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
ASTM A252-98(2007) Standard Specification for Welded and Seamless Steel Pipe Piles
ASTM A254-97(2007) Standard Specification for Copper-Brazed Steel Tubing
A255-07 Standard Test Methods for Determining Hardenability of Steel
A262-02a(2008) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A263-03 Standard Specification for Stainless Chromium Steel-Clad Plate
A264-03 Specification for Stainless Chromium-Nickel Steel-Clad Plate
A265-03 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A266/A266M-03a(2008) Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
ASTM A268/A268M Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
ASTM A269-08 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A270 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A275/A275M-08 Standard Practice for Magnetic Particle Examination of Steel Forgings
A276-08a Standard Specification for Stainless Steel Bars and Shapes
A278/A278M-01(2006) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
A283/A283M-03(2007) Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A285/A285M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A288-91(2008) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A289/A289M-97(2008) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A290/A290M-05 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A291/A291M-05 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A295/A295M-05 Standard Specification for High-Carbon Anti-Friction Bearing Steel
A297/A297M-08 Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A299/A299M-04 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A302/A302M-03(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A304-05e2 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A307-07b Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A307-07b Especificación Normalizada paraTornillos y Pernos de Acero al Carbono, con 60 000 PSI de Resistencia a la Tracción
A308/A308M-06 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A309-01(2007) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A311/A311M-04 Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A312/A312M-08a Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A313/A313M-08 Standard Specification for Stainless Steel Spring Wire
A314-08 Standard Specification for Stainless Steel Billets and Bars for Forging
A319-71(2006) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
A320/A320M-08 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
A322-07 Standard Specification for Steel Bars, Alloy, Standard Grades
A323-05 Standard Specification for Ferroboron
A324-08 Standard Specification for Ferrotitanium
A325-07a Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A325M-08 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
A327-91(2006) Standard Test Methods for Impact Testing of Cast Irons
A327M-91(2006) Standard Test Methods for Impact Testing of Cast Irons (Metric)
A328/A328M-07 Standard Specification for Steel Sheet Piling
ASTM A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
ASTM A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
ASTM A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A336/A336M-08 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A338-84(2004) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
A340-03a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
A341/A341M-00(2005) Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
A342/A342M-04 Standard Test Methods for Permeability of Feebly Magnetic Materials
A343/A343M-03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A345-04 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
A348/A348M-05 Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
A350/A350M-07 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A351/A351M-06 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
A352/A352M-06 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A353/A353M-04 Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
A354-07a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A355-89(2006) Standard Specification for Steel Bars, Alloys, for Nitriding
A356/A356M-07 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
ASTM A358/A358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A363-03 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A367-60(2005) Standard Test Methods of Chill Testing of Cast Iron
A368-95a(2004) Standard Specification for Stainless Steel Wire Strand
ASTM A369/A369M Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
ASTM A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A372/A372M-03(2008) Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A376/A376M-06 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A377-03(2008)e1 Standard Index of Specifications for Ductile-Iron Pressure Pipe
A380-06 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
ASTM A381 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A384/A384M-07 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A385-08 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A387/A387M-06a Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A388/A388M-08 Standard Practice for Ultrasonic Examination of Steel Forgings
A389/A389M-08 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A390-06 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A391/A391M-07 Standard Specification for Grade 80 Alloy Steel Chain
A392-07 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A394-07 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A395/A395M-99(2004) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A400-69(2006) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A401/A401M-03 Standard Specification for Steel Wire, Chromium-Silicon Alloy
ASTM A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A407-07 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
ASTM A409/A409M Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A411-08 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A413/A413M-07 Standard Specification for Carbon Steel Chain
A414/A414M-07 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
A416/A416M-06 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A416M-06 Especificación Normalizada para Torón de Acero, de Siete Alambres Sin Recubrimiento para Concreto Preesforzado
A418/A418M-07 Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
ASTM A420/A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A421/A421M-05 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A421M-05 Especificación Normalizada para Alambre de Acero Aliviado de Esfuerzos sin Recubrimiento para Concreto Preesforzado
ASTM A423/A423M Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A424-06 Standard Specification for Steel, Sheet, for Porcelain Enameling
ASTM A426/A426M Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A427-02(2007) Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
A428/A428M-06 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A434-06 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A435/A435M-90(2007) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A436-84(2006) Standard Specification for Austenitic Gray Iron Castings
A437/A437M-06 Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
A439-83(2004) Standard Specification for Austenitic Ductile Iron Castings
A447/A447M-93(2007) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A449-07b Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A450/A450M-07 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
A451/A451M-06 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A453/A453M-08 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A455/A455M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A456/A456M-08 Standard Specification for Magnetic Particle Examination of Large Crankshaft
Forgings
A459-08 Standard Specification for Zinc-Coated Flat Steel Armoring Tape
A460-94(2004)e1 Standard Specification for Copper-Clad Steel Wire Strand
A463/A463M-06 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A466/A466M-07 Standard Specification for Weldless Chain
A467/A467M-07 Standard Specification for Machine and Coil Chain
A469/A469M-07 Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
A470/A470M-05e1 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A471-08 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A472/A472M-07 Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
A473-01 Standard Specification for Stainless Steel Forgings
A474-03(2008) Standard Specification for Aluminum-Coated Steel Wire Strand
A475-03 Standard Specification for Zinc-Coated Steel Wire Strand
A476/A476M-00(2005) Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
A478-97(2008) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A479/A479M-08 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480/A480M-08b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A481-05 Standard Specification for Chromium Metal
A482-05 Standard Specification for Ferrochrome-Silicon
A483-04 Standard Specification for Silicomanganese
A484/A484M-08 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A485-03 Standard Specification for High Hardenability Antifriction Bearing Steel
A487/A487M-93(2007) Standard Specification for Steel Castings Suitable for Pressure Service
A488/A488M-07 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A489-04e1 Standard Specification for Carbon Steel Lifting Eyes
A490M-04ae1 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
A490-08a Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
A491-07 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A492-95(2004) Standard Specification for Stainless Steel Rope Wire
A493-95(2004) Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A494/A494M-08 Standard Specification for Castings, Nickel and Nickel Alloy
A495-06 Standard Specification for Calcium-Silicon Alloys
A496/A496M-07 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
A497/A497M-07 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
A498-06 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
A499-89(2008) Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
A500/A500M-07 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A500/A500M-07 Carbono Conformados en Frío, Electrosoldados y sin Costura, de forma Circular y no Circular
A501-07 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A501-07 Especificación Normalizada para Tubos Estructurales de Acero al Carbono Conformados en Caliente, Electrosoldados y sin Costura
A502-03 Standard Specification for Rivets, Steel, Structural
A503/A503M-01(2006) Standard Specification for Ultrasonic Examination of Forged Crankshafts
A504/A504M-08 Standard Specification for Wrought Carbon Steel Wheels
A505-00(2005) Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A506-05 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A507-06 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A508/A508M-05b Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A510M-06 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
A510-07 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
A511/A511M-08 Standard Specification for Seamless Stainless Steel Mechanical Tubing
A512-06 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A513-08 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A514/A514M-05 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A515/A515M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A516/A516M-06 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A517/A517M-06 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A518/A518M-99(2008) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A519-06 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A521/A521M-06 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
A522/A522M-07 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
ASTM A523-96(2012) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
ASTM A524-96(2012) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A529/A529M-05 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM A530/A530M-04a Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A531/A531M-91(2006) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A532/A532M-93a(2008) Standard Specification for Abrasion-Resistant Cast Irons
A533/A533M-93(2004)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A534-04 Standard Specification for Carburizing Steels for Anti-Friction Bearings
A536-84(2004) Standard Specification for Ductile Iron Castings
A537/A537M-08 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
ASTM A540/A540M-06 Standard Specification for Alloy-Steel Bolting Materials for Special Applications
A541/A541M-05 Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A542/A542M-99(2004)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
A543/A543M-93(2004)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A550-06 Standard Specification for Ferrocolumbium
A551/A551M-08 Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
ASTM A553/A553M-06 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
ASTM A554-08a Standard Specification for Welded Stainless Steel Mechanical Tubing
A555/A555M-05 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM A556/A556M-96(2005) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A560/A560M-05 Standard Specification for Castings, Chromium-Nickel Alloy
A561-08 Standard Practice for Macroetch Testing of Tool Steel Bars
A562/A562M-06 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
A563-07a Standard Specification for Carbons and Alloy Steel Nuts
A563M-07 Standard Specification for Carbon and Alloy Steel Nuts [Metric]
A564/A564M-04 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A565/A565M-05a Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A568/A568M-07a Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A571/A571M-01(2006) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A572/A572M-07 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A572/A572M-07 Especificación Normalizada para Acero Estructural de Alta Resistencia de Baja Aleación de Columbio-Vanadio
A573/A573M-05 Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A574-04e1 Standard Specification for Alloy Steel Socket-Head Cap Screws
A574M-04e1 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
A575-96(2007) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576-90b(2006) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A577/A577M-90(2007) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M-07 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
A579/A579M-04a Standard Specification for Superstrength Alloy Steel Forgings
A580/A580M-08 Standard Specification for Stainless Steel Wire
A581/A581M-95b(2004) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A582/A582M-05 Standard Specification for Free-Machining Stainless Steel Bars
A586-04a Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
ASTM A587-96(2005) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A588/A588M-05 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A588M-05 Especificación Normalizada para Acero Estructural de Alta Resistencia y Baja Aleaci ón, con Punto Mínimo de Fluencia de hasta 50 ksi [345 MPa], con Resistencia a la Corrosi ón Atmosférica
ASTM A589/A589M-06 Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A592/A592M-04 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
ASTM A595/A595M-06 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A596/A596M-95(2004) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A597-87(2004) Standard Specification for Cast Tool Steel
A598/A598M-02(2007) Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
A599/A599M-07 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A600-92a(2004) Standard Specification for Tool Steel High Speed
A601-05 Standard Specification for Electrolytic Manganese Metal
A602-94(2004) Standard Specification for Automotive Malleable Iron Castings
A603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope
A604/A604M-07 Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A606-04 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A608/A608M-06 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature
A609/A609M-91(2007) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A610-79(2004) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A612/A612M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A615/A615M-08b Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A615/A615M-08a Especificación Normalizada para Barras de Acero al Carbono Lisas y Corrugadas para Refuerzo de Concreto
A618/A618M-04 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A623-08 Standard Specification for Tin Mill Products, General Requirements
A623M-08 Standard Specification for Tin Mill Products, General Requirements [Metric]
A624/A624M-03(2008)e1 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A625/A625M-08 Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
A626/A626M-03(2008)e1 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A632-04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A633/A633M-01(2006) Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A635/A635M-07 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A636-08 Standard Specification for Nickel Oxide Sinter
A638/A638M-00(2004) Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A640-97(2002)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A641/A641M-03 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A644-05 Standard Terminology Relating to Iron Castings
A645/A645M-05 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A646/A646M-06 Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A648-04a Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
A649/A649M-08 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A650/A650M-03(2008) Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A653/A653M-08 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M-05e2 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A657/A657M-03(2008)e1 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A659/A659M-06 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A660-96(2005) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A662/A662M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A663/A663M-89(2006) tandard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A664-06e1 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Tube Sheet, Strip, Plate, and Flat Bar
A667/A667M-87(2003) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
ASTM A668/A668M-04 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
ASTM A671-06 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM A672-08 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A673/A673M-07 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A674-05 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M-03e1 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A677-07 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A678/A678M-05 Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
A679/A679M-06 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A681-08 Standard Specification for Tool Steels Alloy
A682/A682M-05 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
A683-05e1 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A684/A684M-08 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A686-92(2004) Standard Specification for Tool Steel, Carbon
A688/A688M-08 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
A689-97(2007)e1 Standard Specification for Carbon and Alloy Steel Bars for Springs
A690/A690M-07 Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
ASTM A691 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A693-06 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A694 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A696-90a(2006) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A697/A697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
A698/A698M-07 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A700-05 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A701-05 Standard Specification for Ferromanganese-Silicon
A702-89(2006) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
A703/A703M-08 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A704/A704M-06 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A705/A705M-95(2004) Standard Specification for Age-Hardening Stainless Steel Forgings
A706/A706M-08a Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A706/A706M-08 Especificación Normalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas para Refuerzo de Concreto
ASTM A707/A707M-02(2007) Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A709/A709M-08 Standard Specification for Structural Steel for Bridges
A710/A710M-02(2007) Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A711/A711M-07 Standard Specification for Steel Forging Stock
A712-07 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
A713-04 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
ASTM A714-99(2003) Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
A716-08 Standard Specification for Ductile Iron Culvert Pipe
A717/A717M-06 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
A719/A719M-02(2007) Standard Test Method for Lamination Factor of Magnetic Materials
A720/A720M-02(2007) Standard Test Method for Ductility of Nonoriented Electrical Steel
A721/A721M-02(2007) Standard Test Method for Ductility of Oriented Electrical Steel
A722/A722M-07 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
A722/A722M-07 EspecificaciÓn Normalizada para Barras de Acero de Alta Resistencia sin Recubrimiento para Concreto Preesforzado
A723/A723M-08 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A724/A724M-04 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
A726-05 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
ASTM A727/A727M-02(2007) Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A729/A729M-06 Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A732/A732M-05 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
ASTM A733-03 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A734/A734M-87a(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
A735/A735M-03(2007) Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
A736/A736M-03(2007) Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
A737/A737M-99(2004) Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A738/A738M-07 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A739-90a(2006) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A740-98(2008) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A741-98(2003) Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
A742/A742M-03 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A743/A743M-06 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744/A744M-06 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A745/A745M-94(2003) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
A746-03 Standard Specification for Ductile Iron Gravity Sewer Pipe
A747/A747M-07 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A748/A748M-87(2003) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A749/A749M-08 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A751-08 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A752-04 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
A752M-04 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
A753-08 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A754/A754M-06 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A755/A755M-03 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A756-94(2001) Standard Specification for Stainless Anti-Friction Bearing Steel
A757/A757M-00(2004) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A758/A758M-00(2005) Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A759-00(2005) Standard Specification for Carbon Steel Crane Rails
A760/A760M-06 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A761/A761M-04 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A762/A762M-08 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A763-93(2004) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A764-07 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A765/A765M-07 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A767/A767M-05 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A767/A767M-05 Especificación Normalizada para Barras de Acero Cincadas (Galvanizadas) para Refuerzo de Concreto
A768/A768M-05 Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A769/A769M-05 Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
A770/A770M-03(2007) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A772/A772M-00(2005) Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A774/A774M-06 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A775/A775M-07b Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A775/A775M-07b EspecificaciÓn Normalizada para Barras de Acero de Refuerzo Recubiertas con Epoxi
A778-01 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A779/A779M-05 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
A780-01(2006) Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A781/A781M-06 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A782/A782M-06 Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel
A786/A786M-05 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A787-05 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A788/A788M-08a Standard Specification for Steel Forgings, General Requirements
A789/A789M-08a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A790/A790M-08 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A792/A792M-08 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A793-96(2001) Standard Specification for Rolled Floor Plate, Stainless Steel
A794-06 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
A795/A795M-08 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A796/A796M-06 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A798/A798M-07 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A799/A799M-04 Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A800/A800M-01(2006) Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
A801-04 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
A802/A802M-95(2006) Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A803/A803M-08 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
A804/A804M-04 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
A805-08 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A807/A807M-02e1 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A809-08 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A810-01 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A811-03 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
A813/A813M-07 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A814/A814M-08 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A815/A815M-08a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A817-07 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A818-06 Standard Specification for Coppered Carbon Steel Wire
A820/A820M-06 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A821/A821M-05 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks
A822/A822M-04 Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A823-99(2008) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
A824-01(2007) Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A827/A827M-02(2007) Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
A829/A829M-06 Standard Specification for Alloy Structural Steel Plates
A830/A830M-06 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A832/A832M-06 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A834-95(2006) Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A835/A835M-84(2005) Standard Specification for Sizes of Ferroalloys and Alloy Additives
A836/A836M-02(2007) Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A837/A837M-06 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A838-02(2007) Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
A839-02(2008) Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
A840-06 Standard Specification for Fully Processed Magnetic Lamination Steel
A841/A841M-03a(2007) Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
A842-85(2004) Standard Specification for Compacted Graphite Iron Castings
A844/A844M-04 Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
A847/A847M-05 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A848-01(2006) Standard Specification for Low-Carbon Magnetic Iron
A849-00(2005) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A852/A852M-03(2007) Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
A853-04 Standard Specification for Steel Wire, Carbon, for General Use
A854/A854M-08 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A855/A855M-03 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A856/A856M-03 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A857/A857M-07 Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A858/A858M-07 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
A859/A859M-04 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A860/A860M-00(2005) Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
A861-04(2008) Standard Specification for High-Silicon Iron Pipe and Fittings
A862/A862M-98(2008) Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
A865/A865M-06 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A866-01 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A867-03(2008) Standard Specification for Iron-Silicon Relay Steels
A871/A871M-03(2007) Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A872/A872M-07a Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A874/A874M-98(2004) Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A875/A875M-06 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
A876-03 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A877/A877M-05 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
A878/A878M-05 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A879/A879M-06 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A881/A881M-05 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
A882/A882M-04a Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
A884/A884M-06 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A884M-06 Especificación Normalizada para Alambre y Refuerzo Electrosoldado de Alambre de Acero Recubierto con Epoxi
A886/A886M-05 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A887-89(2004) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A888-08 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A889/A889M-03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
A890/A890M-99(2007) Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A891/A891M-08 Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A892-06 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A893/A893M-03(2008) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
A894/A894M-00(2005) Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
A895-89(2004) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A896-89(2004) Standard Practice for Conducting Case Studies on Galvanized Structures
A897/A897M-06 Standard Specification for Austempered Ductile Iron Castings
A898/A898M-07 Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A899-91(2007) Standard Specification for Steel Wire, Epoxy-Coated
A900/A900M-01(2006) Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
A901-03 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
A902-08 Standard Terminology Relating to Metallic Coated Steel Products
A903/A903M-99(2007) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A904-04 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Parts
A905-04 Standard Specification for Steel Wire, Pressure Vessel Winding
A906/A906M-02 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A908-03 Standard Specification for Stainless Steel Needle Tubing
A909/A909M-06 Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
A910/A910M-05 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
A911/A911M-05 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
A912/A912M-04 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
A913/A913M-07 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A914/A914M-92(2005) Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A915/A915M-08 Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A917-08 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A918-06 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A920/A920M-07 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A921/A921M-93(2005) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
A922-05 Standard Specification for Silicon Metal
A923-08 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
A924/A924M-08 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A925-03 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A926-03(2008) Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A927/A927M-04 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
A928/A928M-08a Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A929/A929M-01(2007) Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A930-03 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A931-08 Standard Test Method for Tension Testing of Wire Ropes and Strand
A932/A932M-01(2006) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
A933/A933M-07 Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
A934/A934M-07 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A934-07 Especificación Normalizada para Barras de Acero de Refuerzo Prefabricadas Recubiertas con Epoxi
A937/A937M-06 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
A938-07 Standard Test Method for Torsion Testing of Wire
A939-07 Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
A940/A940M-06 Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
A941-06a Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A942-95(2007) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
A943/A943M-01(2005) Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A944-05 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A945/A945M-06e1 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A946-95(2004) Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
A947M-95(2004) Standard Specification for Textured Stainless Steel Sheet [Metric]
A949/A949M-01(2005) Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A950/A950M-99(2007) Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A951/A951M-06 Standard Specification for Steel Wire for Masonry Joint Reinforcement
A952/A952M-02 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A955/A955M-07a Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
A956-06 Standard Test Method for Leeb Hardness Testing of Steel Products
A957/A957M-08 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A958-00(2006) Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A959-07 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A960/A960M-08 Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A961/A961M-08 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A962/A962M-07b Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
A964/A964M-03 Standard Specification for Corrugated Steel Box Culverts
A965/A965M-06a Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A966/A966M-08 Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A967-05e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A968/A968M-96(2001) Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
A970/A970M-07 Standard Specification for Headed Steel Bars for Concrete Reinforcement
A971/A971M-05 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
A972/A972M-00(2004) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A973/A973M-07 Standard Specification for Grade 100 Alloy Steel Chain
A974-97(2003) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A975-97(2003) Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A976-03 Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
A978/A978M-08 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A979/A979M-03 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A980-97(2003) Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A981-97(2007) Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors
A982/A982M-05 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A983/A983M-06 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A984/A984M-03 Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
A985/A985M-08 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A986/A986M-01(2006) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A987-07 Standard Practice for Measuring Shape Characteristics of Tin Mill Products
A988/A988M-07 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A989/A989M-07 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A990-08 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A991/A991M-08 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A992/A992M-06a Standard Specification for Structural Steel Shapes
A992M-06a Especificación Normalizada para Perfiles de Acero Estructural
A994-05 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A995/A995M-98(2007) Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A996/A996M-06a Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A996/A996M-06a Especificación Normalizada para Barras Corrugadas de Acero de Riel y de Acero de Eje para Refuerzo de Concreto
A997-07 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
A998/A998M-08 Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
A999/A999M-04a Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
A1000-05 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A1001-01(2006) Standard Specification for High Strength Steel Castings in Heavy Sections
A1002-99(2003) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
A1003/A1003M-08 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1004/A1004M-99(2004) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
A1005/A1005M-00(2004) Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
A1006/A1006M-00(2004) Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
A1007-07 Standard Specification for Carbon Steel Wire for Wire Rope
A1008/A1008M-08a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
A1009-05 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications
A1010/A1010M-01e1 Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
A1011/A1011M-08 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1012-02(2007) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
A1013-00(2005) Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
A1014/A1014M-06 Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service
A1015-01(2005) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
A1016/A1016M-04a Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
A1017/A1017M-07 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
A1018/A1018M-08a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1019/A1019M-01(2007) Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains
A1020/A1020M-02(2007) Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
A1021/A1021M-05 Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
A1022/A1022M-07 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
A1023/A1023M-07 Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
A1024/A1024M-02(2007) Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
A1025-05 Standard Specification for Ferroalloys, General Requirements
A1028-03 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
A1030/A1030M-05 Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
A1031-05 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
A1032-04 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
A1033-04 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
A1034/A1034M-05b Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
A1035/A1035M-07 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
A1036-04 Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
A1037/A1037M-05 Standard Specification for Steel Line Pipe, Black, Furnace-butt-Welded
A1038-08 Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
A1039/A1039M-04 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial and Structural, Produced by the Twin-Roll Casting Process
A1040-07 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1041/A1041M-04 Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten
A1042/A1042M-04 Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains
A1043/A1043M-05 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
A1044/A1044M-05 Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
A1045-08 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Water Closets to Sanitary Drainage System
A1046/A1046M-06 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
A1047/A1047M-05 Standard Test Method for Pneumatic Leak Testing of Tubing
A1048/A1048M-06 Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
A1049/A1049M-06 Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
A1053/A1053M-06 Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
A1054-07 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets
A1055-08 Standard Specification for Zinc and Epoxy Dual Coated Steel Reinforcing Bars
A1056-08 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
A1058-08 Standard Test Methods for Mechanical Testing of Steel Products—Metric

TubingChina.com All Rights Reserved

Directory | Standard | Heat | Heat Exchanger | Temperature | Pressure | Corrosion | Hardness | Surface | Properties | Select Stainless Steel | Contact US

Useful Tools:

Stainless Steel Weight Calculator
Metals Weight Calculator
Nickel Alloy Weight Calculator
Copper Brass Alloy Weight Calculator
Copper Brass Alloy Sheet Plate Weight Calculator
Sheet Plate Weight Calculator
Hardness Conversion Calculator
Hardness Conversion Chart
Rockwell Brinell Vickers Shore Hardness Conversion Chart
Conversion Calculator
Length Weight Temperature Volume Pressure Calculater
Pipe Working Pressure Calculator
Pressure Conversion Converter
Round Bar Size Calculator
Gauge Sizes
Sheet Metal Gauge
Pipe Schedule
Nominal Pipe Size
ANSI Pipe Chart
Inch to mm Chart
Stainless Steel Pipe Sizes
Stainless Steel Tubing Sizes Chart
Stainless Steel L H Grade
Stainless Steel Density
Conversion of Stainless Steel
Nickel Alloy Grades Comparison Material Grade Chart Carbon Steel
Structural Steel Comparison Chart



Main Products:

BA Tube | AP Tube
Condenser Tubes Tubing
Stainless Steel Reheater Tube Superheater Tubes
Stainless Steel U bend Tube
Nickel Alloy U bend Tubes
Copper Alloy U Bend Tubes
Heat Exchanger Tube
Super Duplex Pipe
Nickel Alloy Tube
Brass Alloy Tubing
Copper Nickel Alloys Tubes
Stainless Steel Hollow Tube
Stainless Steel Oval Tubing
Stainless Steel Square Tubing
Stainless Steel Rectangular Tubing
Stainless Steel Capillary Tube
Duplex Stainless Steel Pipe
Seamless Stainless Steel Tubing
Corrugated Stainless Steel Tubing
Stainless Steel Twisted Tube
Polishing Stainless Steel Tubing
Stainless Steel Aircraft Tube
Stainless Steel Hydraulic Tubing
Stainless Steel Instrumentation Tubing
Stainless Steel Angle Iron Bar
Stainless Steel Mechanical Tube
Bright Annealing Stainless Tube
Heat resistant Stainless Steel
Stainless Steel Welded Pipe
Extruded Serrated Finned Tubes Integral Finned Tubes / Extruded Aluminum Finned Tubes
Brass Alloys Copper Nickel Alloy Integral Low Finned Tubes
HFW High Frequency Welded Helical Spiral Serrated Finned Tubes
Corrosion Resistant Stainless Steel
Corrosion Resistance Stainless Steel

Stainless Steel Tubing Pipe

304 Stainless Steel Pipe
304L Stainless Steel Pipe
304H Stainless Steel Pipe
304/304L Stainless Steel Tubing
309S Stainless Steel Pipe
310S Stainless Steel Pipe
316L Stainless Steel Tubing
316Ti Stainless Steel Tube
317L Stainless Steel Pipe
321 321H Stainless Steel
347 347H Stainless Steel
904L N08094 Seamless Tubes
17-4 PH 630 UNS S17400 Stainless Steel
253MA S30815 Stainless Steel Tube
S31254 254 SMO Pipe
S31803 Stainless Steel
2205 Duplex Pipe Tubing
S32101 Stainless Steel
S32304 Stainless Steel
2507 Super Duplex Pipe
S32750 Super Duplex Pipe
S32760 Super Duplex Steel
1.4462 Stainless Steel Pipe
ASTM A213 | ASTM A269
ASTM A312 | ASTM A511
ASTM A789 | ASTM A790
ASTM B161 / ASME SB 161 | ASTM B111
EN 10216-5
ASTM A789 ASME SA 789 S31803 S32205 S32101 S32750 S32760 S32304 S31500 S31260 Seamless Tubes
EN 10216-5 1.4462 1.4362 1.4162 1.4410 1.4501 Seamless Tubes
Nickel Alloy Tubing:

UNS N08020 Nickel Alloy 20 Tubing
UNS N02200 Nickel Alloy 200 Tube
UNS N02201 Nickel Alloy 201 Pipe
UNS N04400 400 Nickel Alloy Tubing
N06600 600 2.4816 Nickel Alloy Pipe
N06601 601 2.4851 Nickel Alloy Tubing
N06625 625 2.4856 Nickel Alloy Tubes
N08800 800 Nickel Alloy Tubes
N08810 800H UNS N08810 Nickel Alloy Tubes
N08811 800HT Nickel Alloy Tubes
UNS N08825 825 2.4858 Nickel Alloy Seamless Pipes
ASTM B622 N10276 Nickel Alloy Seamless Tubing
ASTM B622 N06022 Hastelloy C-22 Nickel Alloy Tubes
C28000 Brass Seamless Tubes C44300 Brass Seamless Tubes
C68700 Brass Seamless Tubes
C70600 Copper Nickel Tubes
C71500 Copper Nickel Tubes
DIN 2391 Seamless Precision Steel Tubes
EN 10305-1 E215 E235 E355 Seamless Precision Steel Tube Tubing Tubes
DIN 2393 St28 St34.2 St37.2 St44.2 St52.3 Welded Precision Steel Tubes
EN 10305-2 E195 E235 E355 Welded Cold Drawn Precision Steel Tube