Jiangyin Donghao Stainless Steel Tubing  
  Portugal | Japanese | Русский | España | Deutsch | English | Chinese Sitemap | Contact US

    Products

Products

High Temperature Stainless Steel Pipes








High temperature stainless steel tubing maintain their mechanical properties when exposed to elevated temperatures on either a short- or long-term basis.All materials selection must be determined by the application and operating conditions in each individual case.

With their increased concentration of chrome, silicon and aluminium they are especially resistant under the influence of hot gases as well as in salt and metal melting. However, the individual corrosion resistance is always dependent on the surrounding conditions, and can therefore not be precisely determined in a single testing.

Besides the common Austenitic High Temperature Alloys above (i.e., 1.4948, 1.4878,1.4828, 1.4833, and 1.4845), there are three proprietary Stainless steel alloys: 153 MA, 253 MA, and 353 MA. These three alloys are based on the same concept. Improved oxidation resistance by an increased silicon content and addition of very small quantities of rare earth metals (micro-alloying => MA). Enhanced creep strength due to increased contents of nitrogen (and carbon for 253 MA). In many cases, the properties of these steels have proved to be equivalent or even superior to those of grades with higher contents of alloying elements. 153 MA is normally intended for use at somewhat lower service temperature than the other two grades.

Depending on the area of application these temperatures can rise e.g. to

- 500°C (932°F) in chemical processes
- 700°C (1,292°F) in power plant applications
- 1,000°C (1,832°F) for furnace engineering



304H | 321H | 309S | 310S | 347H

Tube Weight Calculation Working Pressure Calculator Conversion Converter Metals Weight Calculator
Length Converter Capacity Power Converter Area Converter Volume Capacity Converter
Power Energy Converter Pressure Converter Temperature Converter Weight Conversion Converter

Heat Resisting Stainless Steel Seamless Tubes Use of stainless steel under high temperature condition refer table
Corrosion Resistant Stainless Steel Tube
Corrosion Resistance of Stainless Steel Tubes
High Temperature Stainless Steel Tubes
High Temperature Stainless Steel Tubes
High Temperature Property Stainless Steel
Heat resistant Stainless Steel Tubes
Welded Stainless Steel Pipe
U-bend Stainless Steel Tubes
Heat Exchanger Tubes
Duplex Stainless Steel Tubes
Boiler Tubes, Condenser Tubes
Corrugated Seamless Stainless Steel Pipe Tube
DIN 2391 Seamless Precision Steel Tubes
DIN2391 Seamless Pricision Steel Tube Tubing Tubes
Non Acid-resisting Stainless Steel Tube
Bright Annealing Stainless Steel Tubes
High Temperature-Tubes and Pipes Standards
High Temperature Change Stainless Steel Mechnical Properties
Heat Resistant Stainless Steels and Corrosion Resistant Stainless Steels-Valve Steels,Iron Baes Super alloys

Share TubingChina.com All Rights Reserved

Directory | Standard | Heat | Heat Exchanger | Temperature | Pressure | Corrosion | Hardness | Surface | Properties | Selection of Stainless Steel | Contact US

Useful Tools:

Metals weight Calculator
Stainless Steel Weight Calculator
Nickel Alloy Tubing Weight Calculator
Sheet Plate Weight Calculator
Hardness Values Conversion Calculator
Hardness Conversion Calculator
Length Weight Temperature Volume Pressure Conversion
Pipe Working Pressure Calculation
Pressure Conversion Converter Calculator
Gauge Sizes - Wire Sheet Plate Tube
Stainless Steel Pipe Schdule
Nominal Pipe Size
ANSI Pipe Chart

Stainless Steel Tubing and Pipe:

Heat Exchanger Tubes
U Bend Stainless Steel Tubing
Duplex Stainless Steel Pipe
Boiler Tubes, Condenser Tubes
Stainless Steel Seamless Pipes Corrugated Seamless Stainless Steel Pipe Tube
Cold Drawn Bright Annealing Stainless Steel Tubes
Heat resistant Stainless Steel Tubes
Welded Stainless Steel Pipe
Corrosion Resistant Stainless Steel Tube
Corrosion Resistance of Stainless Steel Tubes
Nickel Alloy Seamless Tubes:

UNS N08020 2.4600 Nickel Alloy 20 Seamless Tubing
UNS N02200 2.4066 200 Nickel Alloy Seamless Tubing
UNS N04400 400 Nickel Alloy 2.4360 Nickel Alloy Tubing
UNS N08800 800 Nickel Alloy Seamless Tubes
UNS N08810 800H UNS N08810 Nickel Alloy Seamless Tubes
UNS N08811 800HT Nickel Alloy Seamless Tubes
UNS N08825 825 2.4858 Nickel Alloy Seamless Tubes
UNS N06600 600 2.4816 Nickel Alloy Seamless Tubes
UNS N06625 625 2.4856 Nickel Alloy Seamless Tubes
UNS N10276 C-276 2.4819 Nickel Alloy Seamless Tubing
Why Choose US?

Production Equipment
Testing Equipement
Qualification and Certificates
Quality Control Systerm
Service Range and Procedure

Contact US:
sales@tubingchina.com