Export ASME SA213 TP304 Corrugated Stainless Steel Tubes
On March 10th, 2017, Export ASME SA213 TP304 Corrugated Stainless Steel Tubing finished in Annealed Pickled (AP Tube) . The customer is from Malaysia. The use purpose is for Heat Exchanger. Dimension with Outside Diameter 19.05mm Wall Thickness 1.5mm (Minimum Wall Thickness). Total in 2432KG.
Standard according to ASME Sec II Part A 2013 Edition SA213 Gr TP304 (seamless cold) One copy of original mill certificates and test reports complete with identical heat numbers as stamped on materials shall
be provided. All materials supplied shall be new, in good condition, free from discontinuties, pits and injurious surface imperfections and shall have original stamping required by the material specifications traceable to respective mill certificates.OD tolerance 100% Good, WT Tolerance 1.65 in minimum 100% Good, Length Tolerance within (0,+3mm) 100% good. Mechanical properties in excellent.
Marking: The tubes shall be clearly stencil with mill mark. The marking shall include: manufacturer's name or brand, the specification number, and grade, the condition, hot finished or cold finished, and the wall designation, minimum wall or average wall, heat number and heat treatment lot identification. Package with Plywood Cases with Waterproof Paper inside.
ASME SA213 TP304 Corrugated Stainless Steel Tubing Pictures as below:
Corrugated Stainless Steel Tube Packing
Corrugated Stainless Steel Pipe Marking
Corrugated Stainless Steel Tubing
Corrugated Stainless Steel Tubing Material Test Certificate
Export ASME SA213 TP304 Corrugated Stainless Steel Tubing
|