Zhejiang Guanyu Stainless Steel Tube Co., Ltd  
  Directory | Useful Tool | Sitemap | Contact US | Home

         

Stainless Steel

Compared Austenitic Stainless Steel and Duplex Stainless Steel Strength and Vulnerable






Compared with the austenitic stainless steel, duplex stainless steel strengths are as follows:

1 Yield strength than conventional austenitic stainless steel more than twice as high, and has a plastic molding needs adequate toughness. Use of duplex stainless steel tank or pressure vessel wall thickness less than the usual 30-50% austenite is beneficial to reduce costs.

2 Duplex stainless steel has excellent resistance to stress corrosion cracking capacity, even with the lowest amount of duplex stainless steel alloy has a higher resistance than the austenitic stainless steel stress corrosion cracking capacity, especially in chloride ion environments. Austenitic stainless steel stress corrosion is a common problem difficult to resolve outstanding.

3 In many applications the most common medium of 2205 duplex stainless steel corrosion resistance than the average of 316L stainless stee, and super duplex stainless steel with high corrosion resistance, then a number of media, such as acetic acid, formic acid, etc. can even replace the high-alloy austenitic stainless steel, and even corrosion resistant alloy.

4 Duplex stainless steel has a good resistance to localized corrosion, with the austenitic stainless steel alloy content rather than its resistance to corrosion and fatigue corrosion and wear better than the austenitic stainless steel.

5 The linear expansion coefficient of austenitic stainless steel is low, and carbon steel close fit with the carbon steel connections, has important engineering significance, such as the production of composite boards or lining and so on.

6 in terms of dynamic load or static load conditions, the ratio of austenitic stainless steel has a higher energy absorption capacity, which structural parts to cope with sudden incidents such as collisions, explosions, etc., have obvious advantages of duplex stainless steel, are of practical value .



Compared with the austenitic stainless steel, duplex stainless steel of the vulnerable is as follows:

1 The application of universal and multi-faceted as stainless steel, such as its temperature must be controlled at 250 degrees Celsius.

2 The plasticity and toughness lower than the austenitic stainless steel, cold, heat processing process and molding properties than austenitic stainless steel.

3 The existence of temperature brittle zone, the need for strict control of heat treatment and welding technology system in order to avoid the appearance of harmful phase, damage to property.

Compared with the ferritic stainless steel, duplex stainless steel strengths are as follows:

1 the mechanical properties of ferritic stainless steel than good, especially the plastic toughness ferritic stainless steel is not as brittle as sensitive.

2 In addition to resistance to stress corrosion, other localized corrosion resistance is superior to ferritic stainless steel.

3 cold and cold-forming properties of process performance is much better than ferritic stainless steel.

4 welding performance is far superior to ferritic stainless steel, the former general welding without preheating, without heat treatment after welding.

5 scope of application than the width of ferritic stainless steel.

Related References:
Austenitic Stainless Steel
Superaustenitic Stainless Steel
Austenitic stainless steel for timber fixings
Austenitic Stainless Steel Grades Comparison Table
Effect of Austenitic Steel Composition and Heat Treatment
Compared Austenitic and Duplex Steel strength and vulnerable
Stress Relieving Heat Treatment for Austenitic Stainless Steel
Mechanism Measurement of Work Hardening Austenitic Steel
Composition Effect Magnetic Permeability of Austenitic Steel
Effect of Cold Work and Heat Treatment of Austenitic Stainless Steel

  Stainless Steel Tube/Pipe/Tubing, Nickel Alloy Tubing, Brass Alloy Tubing, Copper Nickel Pipe Material Grades


TubingChina.com All Rights Reserved

Directory | Standard | Heat | Heat Exchanger | Temperature | Pressure | Corrosion | Hardness | Surface | Properties | Select Stainless Steel | Contact US

Useful Tools:

Stainless Steel Weight Calculator
Metals Weight Calculator
Nickel Alloy Weight Calculator
Copper Brass Alloy Weight Calculator
Copper Brass Alloy Sheet Plate Weight Calculator
Sheet Plate Weight Calculator
Hardness Conversion Calculator
Hardness Conversion Chart
Rockwell Brinell Vickers Shore Hardness Conversion Chart
Conversion Calculator
Length Weight Temperature Volume Pressure Calculater
Pipe Working Pressure Calculator
Pressure Conversion Converter
Round Bar Size Calculator
Gauge Sizes
Sheet Metal Gauge
Pipe Schedule
Nominal Pipe Size
ANSI Pipe Chart
Inch to mm Chart
Stainless Steel Pipe Sizes
Stainless Steel Tubing Sizes Chart
Stainless Steel L H Grade
Stainless Steel Density
Conversion of Stainless Steel
Nickel Alloy Grades Comparison Material Grade Chart Carbon Steel
Structural Steel Comparison Chart



Main Products:

BA Tube | AP Tube
Condenser Tubes Tubing
Stainless Steel Reheater Tube Superheater Tubes
Stainless Steel U bend Tube
Nickel Alloy U bend Tubes
Copper Alloy U Bend Tubes
Heat Exchanger Tube
Super Duplex Pipe
Nickel Alloy Tube
Brass Alloy Tubing
Copper Nickel Alloys Tubes
Stainless Steel Hollow Tube
Stainless Steel Oval Tubing
Stainless Steel Square Tubing
Stainless Steel Rectangular Tubing
Stainless Steel Capillary Tube
Duplex Stainless Steel Pipe
Seamless Stainless Steel Tubing
Corrugated Stainless Steel Tubing
Stainless Steel Twisted Tube
Polishing Stainless Steel Tubing
Stainless Steel Aircraft Tube
Stainless Steel Hydraulic Tubing
Stainless Steel Instrumentation Tubing
Stainless Steel Angle Iron Bar
Stainless Steel Mechanical Tube
Bright Annealing Stainless Tube
Heat resistant Stainless Steel
Stainless Steel Welded Pipe
Extruded Serrated Finned Tubes Integral Finned Tubes / Extruded Aluminum Finned Tubes
Brass Alloys Copper Nickel Alloy Integral Low Finned Tubes
HFW High Frequency Welded Helical Spiral Serrated Finned Tubes
Corrosion Resistant Stainless Steel
Corrosion Resistance Stainless Steel

Stainless Steel Tubing Pipe

304 Stainless Steel Pipe
304L Stainless Steel Pipe
304H Stainless Steel Pipe
304/304L Stainless Steel Tubing
309S Stainless Steel Pipe
310S Stainless Steel Pipe
316L Stainless Steel Tubing
316Ti Stainless Steel Tube
317L Stainless Steel Pipe
321 321H Stainless Steel
347 347H Stainless Steel
904L N08094 Seamless Tubes
17-4 PH 630 UNS S17400 Stainless Steel
253MA S30815 Stainless Steel Tube
S31254 254 SMO Pipe
S31803 Stainless Steel
2205 Duplex Pipe Tubing
S32101 Stainless Steel
S32304 Stainless Steel
2507 Super Duplex Pipe
S32750 Super Duplex Pipe
S32760 Super Duplex Steel
1.4462 Stainless Steel Pipe
ASTM A213 | ASTM A269
ASTM A312 | ASTM A511
ASTM A789 | ASTM A790
ASTM B161 / ASME SB 161 | ASTM B111
EN 10216-5
ASTM A789 ASME SA 789 S31803 S32205 S32101 S32750 S32760 S32304 S31500 S31260 Seamless Tubes
EN 10216-5 1.4462 1.4362 1.4162 1.4410 1.4501 Seamless Tubes
Nickel Alloy Tubing:

UNS N08020 Alloy 20 Tubing
UNS N02200 Alloy 200 Tube
UNS N02201 Alloy 201 Pipe
UNS N04400 Monel 400 Tubing
N06600 Inconel 600 Tube
N06601 Inconel 601 Tubing
N06625 Inconel 625 Tubes
N08800 Incoloy 800 Tube
N08810 Incoloy 800H Tube
N08811 Incoloy 800HT Tubing
UNS N08825 Incoloy 825 Pipe
ASTM B622 N10276 C276 Tubing
ASTM B622 N06022 Hastelloy C-22 Alloy Tubes
C28000 Brass Seamless Tubes C44300 Brass Seamless Tubes
C68700 Brass Seamless Tubes
C70600 Copper Nickel Tubes
C71500 Copper Nickel Tubes
DIN 2391 Seamless Precision Steel Tubes
EN 10305-1 E215 E235 E355 Seamless Precision Steel Tube Tubing Tubes
DIN 2393 St28 St34.2 St37.2 St44.2 St52.3 Welded Precision Steel Tubes
EN 10305-2 E195 E235 E355 Welded Cold Drawn Precision Steel Tube