Stainless Steel Cold Worked Tempers
H-series tempers are designed to produce materials with specific quantities of stress-relieved, cold work and cold-worked (drawn) tempers, HR-tempers, order-strengthening tempers and HT-Tempers by cold working.
| H00 |
1/8 hard |
| H01 |
1/4 hard |
| H02 |
1/2 hard |
| H03 |
3/4 hard |
| H04 |
Hard |
| H06 |
Extra hard |
| H08 |
Spring |
| H10 |
Extra spring |
| H12 |
Special spring |
| H13 |
Ultra spring |
| H14 |
Super spring |
| H50 |
Extruded and drawn |
| H52 |
Pierced and drawn |
| H55 |
Light drawn;light cold rolled |
| H58 |
Drawn general purpose |
| H60 |
Cold heading; forming |
| H63 |
Rivet |
| H64 |
Screw |
| H66 |
Bold |
| H70 |
Bending |
| H80 |
Hard drawn |
| H85 |
Medium-hard-drawn electrical wire |
| H86 |
Hard-drawn electrical wire |
| H90 |
As-finned |
| HR01 |
H01and stress relieved |
| HR02 |
H02 and stress relieved |
| HR04 |
H04 and stress relieved |
| HR08 |
H08 and stress relieved |
| HR10 |
H10 and stress relieved |
| HR20 |
As-finned |
| HR50 |
Drawn and stress relieved |
| HT04 |
H04 and order heat treated |
| HT08 |
H08 and order heat treated |
Solution Heat-Treated Temper
TB-series tempers are designed to produce materials with solution heat treating precipitation hardenable or spinodal hardenable alloys.
| TB00 |
Solution heat treated |
Quench-Hardened Tempers
TQ-series tempers are designed to produce materials by quench hardening treatments.
| TQ00 |
Quench hardened |
| TQ50 |
Quench hardened and temper annealed |
| TQ55 |
Quench hardened and temper annealed cold drawn and stress relieved |
| TQ75 |
Interrupted quench hardened |
Solution Heat-Treated and Cold-Worked Tempers
D-series tempers are designed to produce materials by controlled amounts of cold work of solution heat-treated precipitation hardenable or spinodal hardenable alloys.
| D00 |
TB00 cold worked to 1/8 hard |
| D01 |
TB00 cold worked to 1/4 hard |
| D02 |
TB00 cold worked to 1/2 hard |
| D03 |
TB00 cold worked to 3/4 hard |
| D04 |
TB00 cold worked to full hard |
Spinodal Heat Treated Temper
TX-series tempers are designed to produce materials by spinodal heat treatment of spinodal hardenable alloys.
Precipitation Heat-Treated Temper
F-series tempers are designed to produce materials by precipitation heat treatment of precipitation-hardenable alloys.
| F00 |
TB00 and precipitation hardened |
Cold-Worked and Precipitation Heat-Treated Tempers
TH-series tempers are designed in alloys that have been solution heat treated, cold worked, and precipitation heat treated.
| TH01 |
TD01 and precipitation hardened |
| TH02 |
TD02 and precipitation hardened |
| TH03 |
TD03 and precipitation hardened |
| TH04 |
TD04 and precipitation |
Mill-Hardened Tempers
TM-series tempers are designed to produce heat-treated materials supplied by the mill resulting from combinations of cold work and precipitation heat treatment or spinodal heat treatment.
| TM00 |
AM |
| TM01 |
1/4 HM |
| TM02 |
1/2 HM |
| TM04 |
HM |
| TM06 |
XHM |
| TM08 |
XHMS |
Cold Worked and Spinodal Heat Treated Tempers
TS-series tempers are produced in alloys that have been cold worked, spinodal heat treated and solution heat treated.
| TS00 |
1/8 hard and spinodal hardened (1/8 TS) |
| TS01 |
1/4 hard and spinodal hardened (1/4 TS) |
| TS02 |
1/2 hard and spinodal hardened (1/2 TS) |
| TS03 |
3/4 hard and spinodal hardened (3/4 TS) |
| TS04 |
Hard and spinodal hardened |
| TS06 |
Extra hard and spinodal hardened |
| TS08 |
Spring and spinodal hardened |
| TS10 |
Extra spring and spinodal hardened |
| TS12 |
Special spring and spinodal hardened |
| TS13 |
Ultra spring and spinodal hardened |
| TS14 |
Super spring and spinodal hardened |
Precipitation Heat-Treated or Spinodal Heat-Treated, Cold-Worked, and Thermal Stress-Relieved Tempers
TR-series tempers are designed to be produced in spinodal heat-treated or cold-worked precipiation heat-treated alloys by thermal stress relief.
| TR01 |
TL01 and stress relieved |
| TR02 |
TL02 and stress relieved |
| TR04 |
TL04 and stress relieved |
Precipitation Heat-Treated or Spinodal Heat-Treated and Cold-Worked Tempers
TL-series tempers are designed to be produced by cold working the spinodal heat-treated or precipitation heat-treated alloys.
| TL00 |
TF00 cold worked to 1/8 hard |
| TL01 |
TF00 cold worked to 1/4 hard |
| TL02 |
TF00 cold worked to 1/2 hard |
| TL04 |
TF00 cold worked to full hard |
| TL08 |
TF00 cold worked to spring |
| TL10 |
TF00 cold worked to extra spring |
Tube, Welded, Cold-Worked and Stress Relieved Tempers
WR-series tempers are designed as a result of forming, welding, cold working, and stress relieving when producing a tube.
| WR00 |
WM00; drawn and stress relieved |
| WR01 |
WM01; drawn and stress relieved |
| WR02 |
WM02; drawn and stress relieved |
| WR03 |
WM03; drawn and stress relieved |
| WR04 |
WM04; drawn and stress relieved |
| WR06 |
WM06; drawn and stress relieved |
Tube, Welded and Cold-Worked Tempers
WH-series tempers are designed as a result of forming, welding, and cold working when producing a tube.
| WH00 |
Welded and drawn to 1/8 hard |
| WH01 |
Welded and drawn to 1/4 hard |
| WH02 |
Welded and drawn to 1/2 hard |
| WH03 |
Welded and drawn to 3/4 hard |
| WH04 |
Welded and drawn to full hard |
| WH06 |
Welded and drawn to extra hard |
Hot Rolling - Hot Rolling Process | Hot Rolling Application | Types of Hot Rolling Mill | Hot Rolled Steel Tube | History
Cold Rolling - Physical metallurgy | Degree of cold work | Cold Rolling Stainless Steel | Manufacturing Process
Foil rolling | Rolling Mill | Steel Mill | Production methods | Recycling of Steel | Modern Steelmaking | Contemporary Steel
|
