Alat kelengkapan ISO Flensa ISO
Guanyu Tube offers a complete line of ISO vacuum fittings and ISO flanges. One different vacuum fittings type from Alat kelengkapan dan flensa KF dan Alat kelengkapan CF dan flensa CF. ISO fittings are ideal for high vacuum environments. ISO Components, ISO Fittings and ISO Adapters are available in a variety of configurations.
- ISO Stainless Steel Flanges
- ISO Stainless Steel Nipples
- ISO Stainless Steel Elbows
- ISO Stainless Steel Tees
- ISO Stainless Steel Crosses
- ISO Stainless Steel Clamps and Seals
ISO vacuum fittings and ISO flanges Fitur:
- 1. Flanges are designed according to ISO specification and can be changed upon request.
- 2. Flange sizes are from ISO 63 to ISO 160. Special sizes upon request.
- 3. Vacuum Range: ≥10-8 Torr
- 4. Standard materials are 304 and 316L baja tahan karat.
- 5. Tube sizes are from 2-1/2″ to 6″
- 6. The ISO flange system consists of two sexless flanges, an O-ring supported by a center ring and a range of clamps.
- 7. The system can afford up to 400℉ (200℃). However, sustained heating above 302℉ (150℃) may result in deterioration of the O-ring.
- 8. ISO products are supplied with a machining finish. Other finishes are also available.
- 9. Flanges and seals are reusable.
- 10. Quick assembly and disassembly.
- 11. ISO flanges are 100% tested before shipping.
- 12. Seal Temperature Range:
- Fluorocarbon FKM (Viton): -5℃～204℃ (23℉ -399℉)
- Silicon: -50℃～180℃ (-58℉ 〜356℉)
- Buna-N (NBR): -25℃～121℃ (-13℉～250℉)
ISO vacuum fittings and ISO flanges Aplikasi:
- 1. High Vacuum
- 2. Roughing line
- 3. Vacuum systems, which require cleaning and modified frequently.
- 4. Experimental system in research laboratories
1. ISO FLANGE
2. DOUBLE CLAW
3. OUTER RING
4. O-RING
5. CENTERING RING
1. OUTER RING
2. O-RING
3. DOUBLE CLAW
4. CENTERING RING
5. ISO FLANGE
Bored Flange
| Flange Ukuran | Tabung Ukuran | Dimensions, in. (mm) | Dimensions, in. (mm) | Dimensions, in. (mm) | Dimensions, in. (mm) |
| - | - | A | B | C | D |
| ISO63 | 2 1/2″ | 3.74″ (95.0) | 0.47″ (12.0) | 2.51″ (63.8) | 2.38″ (60.4) |
| ISO80 | 3″ | 4.33″ (110.0) | 0.47″ (12.0) | 3.01″ (76.5) | 2.87″ (73.0) |
| ISO100 | 4″ | 5.12″ (130.0) | 0.47″ (12.0) | 4.02″ (102.0) | 3.88″ (98.5) |
| ISO160 | 6″ | 7.09″ (180.0) | 0.47″ (12.0) | 6.02″ (153.0) | 5.85″ (148.7) |
| ISO200 | 8″ | 9.45″ (240.0) | 0.47″ (12.0) | 8.02″ (203.7) | 7.88″ (200.2) |
Nonrotatable Flange
| Flange Ukuran | Tabung Ukuran | Dimension, in. (mm) | Dimension, in. (mm) | Dimension, in. (mm) | Dimension, in. (mm) | Dimension, in. (mm) | Bolt Holes | Hole Diameter |
| - | - | A | B | C | D | F | - | - |
| ISO63 | 2 1/2″ | 5.12″ (130.0) | 0.47″ (12.0) | 2.44″ (61.9) | 2.51″ (63.8) | 4.33″ (110.0) | 4 | 0.35″ (9.0) |
| ISO80 | 3″ | 5.71″ (145.0) | 0.47″ (12.0) | 2.94″ (74.6) | 3.01″ (76.5) | 4.92″ (125.0) | 8 | 0.35″ (9.0) |
| ISO100 | 4″ | 6.50″ (165.0) | 0.47″ (12.0) | 3.91″ (99.3) | 4.02″ (102.0) | 5.71″ (145.0) | 8 | 0.35″ (9.0) |
| ISO160 | 6″ | 8.86″ (225.0) | 0.63″ (16.0) | 5.87″ (149.0) | 6.02″ (153.0) | 7.87″ (200.0) | 8 | 0.43″ (11.0) |
| IS0200 | 8″ | 11.22″ (285.0) | 0.63″ (16.0) | 7.83″ (199.0) | 8.02″ (203.7) | 10.24″ (260.0) | 12 | 0.43″ (11.0) |
90° Elbow
| Flange Ukuran | Tabung Ukuran | Dimensions, in. (mm) | Dimensions, in. (mm) |
| - | - | A | B |
| ISO63 | 2 1/2″ | 4.02″ (102.0) | 3.75″ (95.3) |
| ISO80 | 3″ | 4.76″ (121.0) | 4.50″ (114.0) |
| ISO100 | 4″ | 6.26″ (159.0) | 6.00″ (152.0) |
| ISO160 | 6″ | 9.25″ (235.0) | 9.02″ (229.0) |
Full Nipples
| Flange Ukuran | Tabung Ukuran | A, in. (mm) |
| ISO63 | 2 1/2″ | 6.50″ (165.0) |
| ISO80 | 3″ | 7.01″ (178.0) |
| ISO100 | 4″ | 7.76″ (197.0) |
| ISO160 | 6″ | 10.75″ (273.0) |
Double Claw Clamp
| Flange Ukuran | Dimensions, in. (mm) | Dimensions, in. (mm) | Thread Ukuran | Clamps Required |
| - | A | B | - | - |
| ISO63 | 0.94″ (24.0) | 2.03″ (51.5) | 5/16-18 UNC | 3-4 |
| ISO80 | 0.94″ (24.0) | 2.03″ (51.5) | 5/16-18 UNC | 4-8 |
| ISO100 | 0.94″ (24.0) | 2.03″ (51.5) | 5/16-18 UNC | 4-8 |
| ISO160 | 1.08″ (27.5) | 2.09″ (53.0) | 5/16-18 UNC | 4-8 |
Reducing Cross
| Flange Size | Flange Size | Tube Size | Tube Size | Dimensions, in. (mm) | Dimensions, in. (mm) |
| Run | Brabch | T | Tx | A | B |
| ISO80 | ISO63 | 3″ | 2 1/2″ | 3.50″ (88.9) | 3.50″ (88.9) |
| ISO100 | ISO63 | 4″ | 2 1/2″ | 4.13″ (105.0) | 4.02″ (102.0) |
| ISO100 | ISO80 | 4″ | 3″ | 4.13″ (105.0) | 4.02″ (102.0) |
| ISO160 | ISO63 | 6″ | 2 1/2″ | 5.24″ (133.0) | 5.00″ (127.0) |
| ISO160 | ISO80 | 6″ | 3″ | 5.24″ (133.0) | 5.00″ (127.0) |
| ISO160 | ISO100 | 6″ | 4″ | 5.24″ (133.0) | 5.12″ (130.0) |
Referensi Terkait:
Pemasangan Tabung Baja Tahan Karat
Metode Sambungan Pemasangan Pipa Baja Tahan Karat
Standar dan Spesifikasi Tabung dan Perlengkapan Pipa Baja ISO
Standar dan Spesifikasi Tabung dan Perlengkapan Pipa Baja DIN
Standar dan Spesifikasi Tabung dan Fitting Pipa BS
Standar Pemasangan Tabung Pipa JIS
Spesifikasi Standar ASTM untuk Tabung Mekanik Tabung Struktural
Perlengkapan Pipa Baja Tahan Karat Austenitik Tempa ASTM A403
Perlengkapan Flensa Tekanan Uji Hidrostatik
Spesifikasi Bahan ASTM Fitting Flange Cast Forging Valve
Spesifikasi Standar Katup ASTM
DIN 1686 - Standar untuk Toleransi Umum Pengecoran Kasar
Tabel Perbandingan Material DIN 1691 1693 dan DIN EN 1561
Tabel Toleransi ISO
Toleransi ISO Untuk Pengencang
Toleransi terhadap ISO 9445 Strip Sempit dan Lebar yang Digulung Dingin
Toleransi terhadap ISO 9444 Strip canai panas yang digulung terus menerus
Standar dan Spesifikasi Tabung dan Perlengkapan Pipa Baja ISO
Toleransi terhadap pelat kuarto baja tahan karat canai panas ISO 18286