|
|
|
ISO Steel Pipe Tube and Fittings Standard and Specifications
ISO Tolerances For Fasteners | ISO Tolerance Chart | ISO & Metric Standards | ISO Steel Pipe Tube and Fittings Standard | ISO 2768 | ISO 8062 BS6615 Casting Tolerance Standard | Rough Casting Tolerance
ISO 7-1:1994-05
Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
ISO 7-2:2000
Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauge
ISO 49:1994
Malleable cast iron fittings threaded to ISO 7-1
ISO 228-1:2000
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 228-2:1987
Pipe threads where pressure-tight joints are not made on the threads; Part 2 : Verification by means of limit gauge
ISO 264:1976
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure; Laying lengths; Metric series
ISO 265-1:1988
Pipes and fittings of plastics materials; fittings for domestic and industrial waste pipes; basic dimensions: metric series; part 1: unplasticized poly(vinyl chloride) (PVC-U)
ISO 392:1986
Asbestos-cement pipe fittings for building and sanitary purposes
ISO 580:1990
Injection-molded unplasticized poly(vinyl chloride) (PVC-U) fittings; oven test; test method and basic specifications
ISO 727-1:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series
ISO 727-2:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series
ISO 881:1980
Asbestos-cement pipes, joints, fittings/sewage/drain
ISO 1179:1981
Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications
ISO 1635-2:1987
Seamless wrought copper and copper alloy tube
ISO 1651:1974
Tube drawing mandrels
ISO 1684:1975
Wire, bar and tube drawing dies; Specifications
ISO 2016:1981
Capillary solder fittings for copper tubes; Assembly dimensions and tests
ISO 2035:1974
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure; Pressure-resistance test
ISO 2044:1974
Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe; Hydraulic internal pressure test
ISO 2048:1990
Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints; minimum depths of engagement
ISO 2284:1987
Hand taps for parallel and taper pipe threads; General dimensions and marking
ISO 2507-1:1995
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method
ISO 2507-2:1995
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes
ISO 2507-3:1995
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
ISO 2531:1998
Ductile iron pipes, fittings, accessories and their joints for water or gas applications
ISO 2804:1996
Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions
ISO 2851:1993
Stainless steel bends and tees for the food industry
ISO 2852:1993
Stainless steel clamp pipe couplings for the food industry
ISO 3183-1:1996
Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 1: Pipes of requirement class A
ISO 3183-2:1996
Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 2: Pipes of requirements class B
ISO 3253:1998
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
ISO/TR 3313:1998
Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
ISO 3419:1981
Non-alloy and alloy steel butt-welding fittings
ISO 3458:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes ; Test of leakproofness under internal pressure
ISO 3459:1976
Polyethylene (PE) pressure pipes; Joints assembled with mechanical fittings; Internal under-pressure test method and requirement
ISO 3477:1981
Polypropylene (PP) pipes and fittings - density
ISO 3501:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of resistance to pull out
ISO 3503:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under internal pressure when subjected to bending
ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings; Specification and determination of density
ISO 3545-1:1989
Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular accessories with circular cross-section
ISO 3545-2:1989
Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular hollow sections
ISO 3545-3:1989
Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular cross-section
ISO 3586:1976
Glass plant, pipeline and fittings; general rules for testing, handling and use
ISO 3587:1976
Glass plant, pipeline and fittings; Pipeline and fittings of nominal bore 15 to 150 mm; Compatibility and interchangeability
ISO 3603:1977
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness
ISO 3604:1976
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness under conditions of external hydraulic pressure
ISO 3633:2002
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U)
ISO 4056:1978
Polyethylene (PE) pipes and fittings- designation
ISO 4059:1978
Polyethylene (PE) pipes; Pressure drop in mechanical pipe-jointing systems; Method of test and requirements
ISO 4132:1979
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure; Laying lengths and size of threads; Metric series
ISO 4144:2003
Pipework - Stainless steel fittings threaded in accordance with ISO 7-1
ISO 4145:1986
Non-alloy steel fittings threaded to ISO 7/1
ISO 4230:1987
Hand- and machine-operated circular screwing dies for taper pipe threads; R series
ISO 4231:1987
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series
ISO 4397:1993
Fluid power systems and components; connectors and associated components; nominal outside diameters of tubes and nominal inside diameters of hoses
ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings; Determination and specification of density
ISO 4422-1:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 1: General
ISO 4422-2:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 2: Pipes (with or without integral sockets)
ISO 4422-3:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 3: Fittings and joints
ISO 4422-5:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications - Part 5: Fitness for purpose of the system
ISO 4435:2003
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U)
ISO 4440-1:1994
Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 1: Test method
ISO 4440-2:1994
Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 2: Test conditions
ISO 4451:1980
Polyethylene (PE) pipes and fittings - determinati
ISO 4483:1979
Asbestos-cement pipelines; Field pressure testing
ISO 4486:1985
Asbestos-cement ventilation ducts and fittings; Dimensions and characteristics
ISO 4488:1979
Asbestos-cement pipes and joints for thrust-boring and pipe jacking
ISO 4704:1977
Glass plant, pipeline and fittings; Glass plant components
ISO/TR 5168:1998
Measurement of fluid flow - Evaluation of uncertainties
ISO 5251:1981
Stainless steel butt-welding fittings
ISO 5256:1985
Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal tar derived materials
ISO 5361:1999
Anaesthetic and respiratory equipment - Tracheal tubes and connectors
ISO 5730:1992
Stationary shell boilers of welded construction (other than water-tube boilers)
ISO 5969:1979
Ground thread taps for pipe threads G series and Rp series; Tolerances on the threaded portion
ISO 6207:1992
Seamless nickel and nickel alloy tube
ISO 6447:1983
Rubber seals; Joint rings used for gas supply pipes and fittings; Specification for material
ISO 6448:1985
Rubber seals; Joint rings used for petroleum product supply pipes and fittings; Specification for material
ISO 6455:1983
Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure; Dimensions of laying lengths; Metric series
ISO 6594:1983
Cast iron drainage pipes and fittings; Spigot series
ISO 6605:2002
Hydraulic fluid power - Hoses and hose assemblies - Test methods
ISO 6761:1981
Steel tubes; Preparation of ends of tubes and fittings for welding
ISO 6964:1986
Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification
ISO/TR 7074:1986
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
ISO 7228:1993
Tracheal tube connectors
ISO 7245:1984
Pipes and fittings of acrylonitrile-butadiene- styrene (ABS); General specification for moulding and extrusion materials
ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/ acrylester (ASA); General specification for moulding and extrusion materials
ISO 7268:1983
Pipe components; Definition of nominal pressure
ISO 7278-2:1988
Liquid hydrocarbons; dynamic measurement; proving systems for volumetric meters;
part 2: pipe provers
ISO 7279:1984
Polypropylene (PP) fittings for pipes under pressure; Sockets for fusion using heated tools; Metric series; Dimensions of sockets
ISO 7370:1982
Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified diameters and standard lengths
ISO 7387-1:1983
Adhesives with solvents for assembly of u PVC pipe elements; Characterization; Part 1 : Basic test methods
ISO 7608:1985
Shipbuilding; Inland navigation; Couplings for disposal of oily mixture and sewage water
ISO 7671:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)
ISO 7675:2003
Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)
ISO 7682:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)
ISO 7686:1992
Plastics pipes and fittings; opacity; test method
ISO 8142:1990
Thermal insulation; bonded preformed man-made mineral fiber pipe sections; specification
ISO 8283-1:1991
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 1: unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
ISO 8283-2:1992
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 2: polyethylene (PE)
ISO 8283-3:1992
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 3: polypropylene (PP)
ISO 8283-4:1992
Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 4: acrylonitrile/butadiene/styrene (ABS)
ISO 8361-1:1991
Thermoplastics pipes and fittings; water absorption;
part 1: general test method
ISO 8361-2:1991
Thermoplastics pipes and fittings; water absorption;
part 2: test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
ISO 8361-3:1991
Thermoplastics pipes and fittings; water absorption;
part 3: test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
ISO 8434-1, :1994
Metallic tube connections for fluid power and general use -
Part 1: 24 compression fittings
ISO 8434-2:1994
Metallic tube fittings for fluid power and general use -
Part 2: 37 flared fittings
ISO 8434-3:1995
Metallic tube connections for fluid power and general use -
Part 3: O-ring face seal fittings
ISO 8434-4:1995
Metallic tube connections for fluid power and general use -
Part 4: 24 cone connectors with O-ring weld-on nipples
ISO 8434-5:1995
Metallic tube connections for fluid power and general use -
Part 5: Test methods for threaded hydraulic fluid power connections
ISO 8491:1998
Metallic materials - Tube (in full section) - Bend test
ISO 8492:1998
Metallic materials - Tube - Flattening test
ISO 8493:1998
Metallic materials - Tube - Drift-expanding test
ISO 8494:1998
Metallic materials - Tube - Flanging test
ISO 8495:1998
Metallic materials - Tube - Ring-expanding test
ISO 8496:1998
Metallic materials - Tube - Ring tensile test
ISO 8497:1994
Thermal insulation; determination of steady-state thermal transmission properties of thermal insulation for circular pipes
ISO 8572:1991
Pipes and fittings made of glass-reinforced thermosetting plastics (GRP); definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing
ISO 8770:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
ISO 8772:1991
High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems; specifications
ISO 8773:1991
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems; specifications
ISO 8796:2004
Polyethylene PE 32 and PE 40 pipes for irrigation laterals - Susceptibility to environmental stress cracking induced by insert-type fittings - Test method and requirements
ISO 9080:2003
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 9095:1990
Steel tubes; continuous character marking and colour coding for material identification
ISO 9261:2004
Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods
ISO 9356:1989
Polyolefin pipe assemblies with or without jointed fittings; resistance to internal pressure; test method
ISO 9623:1997
PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure - Design lengths and size of threads - Metric series
ISO 9625:1993
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
ISO 9691:1992
Rubber; recommendations for the workmanship of pipe joint rings; description and classification of imperfections
ISO 9803:1993
Vacuum technology; pipeline fittings; mounting dimensions
ISO/TR 9824-1:1990
Measurement of free surface flow in closed conduits;
part 1: methods
ISO 9808:1990
Solar water heaters; elastomeric materials for absorbers, connecting pipes and fittings; method of assessment
ISO/TR 9824-2:1990
Measurement of free surface flow in closed conduits;
part 2: equipment
ISO 9853:1991
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems; crushing test
ISO 10147:1994
Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
ISO/TR 10358:1993
Plastics pipes and fittings; combined chemical-resistance classification table
ISO 10400:1993
Petroleum and natural gas industries; formulae and calculation for casing, tubing, drill pipe and line pipe properties
ISO 10420:1994
Petroleum and natural gas industries; flexible pipe systems for subsea and marine riser applications
ISO 10422:2001
Petroleum and natural gas industries - Threading, gauging and thread inspection of casing, tubing and line pipe
ISO 10508:1995
Thermoplastics pipes and fittings for hot and cold water systems
ISO 10806:2003
Pipework - Fittings for corrugated metal hoses
ISO/TR 10837:1991
Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
ISO 10928:1997
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
ISO 10931-1:1997
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 1: General
ISO 10931-2:1997
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 2: Pipes
ISO 10931-3:1996
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 3: Fittings
ISO 10931-4:1997
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 4: Valves
ISO 10931-5:1998
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 5: Fitness for purpose of the system
ISO/TR 11295:1992
Techniques for rehabilitation of pipeline systems by the use of plastics pipes and fittings
ISO 11413:1996
Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
ISO 11414:1996
Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
ISO 11420:1996
Method for the assessment of the degree of carbon dispersion polyolefin pipe, fittings and compounds
ISO 11496:1993
Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of laminar imperfections
ISO/TR 11647:1996
Fusion compatibility of polyethylene (PE) pipes and fittings
ISO 11961:1996
Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
ISO 12162:1995
Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient
ISO 13664:1997
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections
ISO 13665:1997
Seamless and welded steel tube for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
ISO 13761:1996
Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20
ISO 13783:1997
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure
Related References:
Stainless Steel Tube Fitting
Stainless Steel Pipe Fitting Connection Method
ISO Steel Pipe Tube and Fittings Standard and Specifications
DIN Steel Pipe Tube and Fittings Standard and Specification
BS Pipe Tube and Fitting Standard and Specification
JIS Pipe Tube Fitting Standard
ASTM Standard Specification for Structural Tubing Mechanical Tubing
ASTM A403 Wrought Austenitic Stainless Steel Piping Fittings
Hydrostatic Test Pressure Flange Fittings
ASTM Material Specification Fitting Flange Cast Forging Valve
ASTM Valve Standard Specification
DIN 1686 - Standard for Rough Casting General Tolerance
Material Comparison Table DIN 1691 1693 and DIN EN 1561
ISO Tolerance Table
ISO Tolerances For Fasteners
Tolerances to ISO 9445 Cold Rolled Narrow and Wide Strip
Tolerances to ISO 9444 ontinuously Rolled Hot Rolled Strip
ISO Steel Pipe Tube and Fittings Standard and Specifications
Tolerances to ISO 18286 hot rolled stainless steel quarto plate
|
|
|
