2.0872-CuNi10Fe1Mn
Standard: DIN EN 1652
Equal to:Cunifer 10.Cupronicdel 90/10
Anticorrosion environment: The sea water, contains the salt water, the industry water
Application: Ship-building industry's seawater conduit system, marine project apply, desalinization seawater delivery pipe
2.4066/2.4068-Ni99,2/LC-Ni99
Standard :DIN 17740/2.4068VdTUV-Wbl.345
Equal to:Nickel 99,2/LC-Nickel 99,2/Nickel 200/ Nickel 201
Anticorrosion environment: Many kinds of organic solution/alkalinity liquids
Apply to: The production soda water, chlorine, salty pedantry, the soap, Yuan wash the medicinal preparation, food industry
2.4605-NiCr23Mo16AI
Standard :VdTUV-Wbl.505
Equal to:Nicrofer 5923 hMo Alloy 59
Anticorrosion environment: Under oxidized and reducing condition high corrosive medium, inorganic acid, like nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid
Apply to: The desulphurization factory trachea, the drugs manufacture industry, uses the solid combustion power plant, the treatment plant heating system
2.4360-NiCu30Fe
Standard :VdTUV-Wbl.263,DIN 17743
Equal to:Monel 400,Alloy 400,Nicorros
Anticorrosion environment: Sea water, hydrofluoric acid, sulfuric acid and non-oxidized diluted acid, alkali and lye
Apply to: Salt industry, sea water desalinization factory, nuclear fuel processing
2.4602-NiCr21Mo14W
Standard :VdTUV-Wbl.479,DIN 17744
Equal to: Hastelloy C22,lnconel 622,Nicrofer 5621 hMoW
Anticorrosion environment: Strong corrosion, oxidation and reducing atmosphere and high temperature environment
Apply to: Chemical industry, formic acid and ethanoic acid production, chlorous acid and phosphoric acid production, purification system waste gas
2.4610-NiMo16Cr16Ti
Standard :VdTUV-Wbl.424,DIN 17744
Equal to:Hastelloy C4, Alloy C 4,Nicrofer 6616 hMo
Anticorrosion environment: Under the oxidation and the reducing condition contains the chlorine and the sulfur high corrosive medium, the dilute sulphuric acid
Apply to: Chemistry reaction still, chlorination response
2.4633-NiCr25FeAIY
Standard :DIN 17742. VdTUV-Wbl.540
Equal to:Nicrofer 6025 H/HTAlloy 602/602CA
Anticorrosion environment: The heat-resisting high temperature reaches 1200 ℃ , the cold hot repeated extreme condition, to contain the sulfur under hot conditions oxidized environment
Apply to: Makes the furnace, the heating and the chemical process craft, the power plant
2.4819-NiMo16Cr15W
VdTUV-Wbl.400,DIN 17744
Equal to:Hastelloy C-276 , Alloy C-276,Nicrofer 5716 hMoW
Anticorrosion environment: Including chloride ion high temperature gas, hydrochloric acid and chloride solution, highly concentrated oxidation salt brine
Apply to: Chemistry and petrochemical craft, desulphurization factory breather and system, acidic gas, sulfuric acid cooling system, paper industry, organic acid manufacture
Visual Testing
100% PMI Testing
Hydraustatic Testing
Plywood Cases Package
Iron Frame Plywood Case Package
Nickel Alloy Tubing Specification:
ASME SB163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ASME SB165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
ASME SB167 Standard Specification for Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube
ASME SB407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ASME SB423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube
ASME SB444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
ASME SB622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
ASME SB668 UNS N08028 Seamless Pipe and Tube
ASME SB690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
ASME SB729 Standard Specification for seamless UNS N08020, UNS N08026, and UNS N08024 nickel alloy pipe and Tube
Standards |
Desciption |
ASTM B163 |
Standard Specifications for seamless nickel and nickel alloy condensers and heat-exchanger tubes |
ASTM B704 |
Standard Specification for Welded Alloy Tubes |
ASTM B705 |
Standard Specification for Nickel-Alloy Welded Pipe |
DIN 17744 (2002/09) |
nickel-forgeable alloy with molybdenum and chrome |
DIN 17750 (2002/09) |
ribbons and sheet metal out of nickel with nickel-wrought alloy properties |
DIN 17751 (2002/09) |
tubes out of nickel with nickel-wrought alloy properties |
DIN 17752 (2002/09) |
rod made from nickel with nickel-wrought alloy properties |
DIN 17753 (2002/09) |
wire out of nickel with nickel-wrought alloy properties |
VdTÜV / Werkstoffblatt 432/1 |
extremely corrosion resistant nickel based alloy, niCr21Mo, material-nr. 2.4858 ribbon, sheet metal |
VdTÜV / Werkstoffblatt 432/2 |
432/2 extremely corrosion resistant nickel based alloy, NiCr 21 Mo, material-nr. 2.4858 seamless pipe |
VdTÜV / Werkstoffblatt 432/3 |
extremely corrosion resistant nickel based alloy, NiCr 21 Mo, material-nr. 2.3858 rod steel, forging |
Related References:
Nickel Alloy Tube
Nickel Alloy Pipe Weight Calculator
Nickel Alloy Density Specific Gravity Chart
Sheet Plate Weight Calculator
Nickel Base Alloy
Corrosion Resistance of Nickel Alloy
Nickel Effect In Stainless Steel
Nickel Alloy Grades Comparison Chart
2.4360 | 2.4600 | 2.4602 | 2.4605 | 2.4610 | 2.4633 | 2.4816 | 2.4851 | 2.4856 | 2.4858 | 2.4889
Chemical Composition of Hastelloy
UNS Number N1 Nickel Alloys | UNS Number N2 Nickel Alloys | UNS Number N3 Nickel Alloys
Selection of Stainless Steel and Nickel Alloys
Special Alloy Steel:
ID |
UNS NO. |
Other Name |
Abbreviation |
DIN/SEW
Parent metal or tube |
ASTM
Parent metal or tube |
VdTUV
Material name |
Density
(g/cm 3 |
1.4361 |
S30600 |
|
X1CrNiSi18-15-4 |
DIN EN 10088-2 |
A240/A269 A312 |
|
7.7 |
1.4429 |
S31653 |
|
X2CrNiMoN17-13-3 |
DIN EN 10088-2/
DIN17455-DIN 17457 |
A240/A312 |
|
8.0 |
14439/
1.4438 |
S31726 |
|
X2CrNiMoN17-13-5 |
DIN EN 10088-2/
DIN17455-DIN 17457 |
A240 A249 A269 A312 A376 A409 |
405 |
8.0 |
1.4462 |
S31803 |
Duplex |
X2CrNiMoN122-5-3 |
DIN EN 10088-2 |
A240/A790 A928 |
418 |
7.8 |
1.4465 |
N08310 |
|
X1CrNiMoN25-25-2 |
SEW 400 |
|
486 |
8.0 |
1.4529 |
N08926 |
6Moly |
X1NiCrMoCuN25-20-7 |
DIN EN 10088-2 |
B625 A240/A312 B673 B674 B677 |
502 |
8.1 |
1.4539 |
N08904 |
904L |
X1NiCrMoCu25-20-5 |
DIN EN 10088-2 |
A312 A240 B625 B673 B674 B677 |
421 |
8.0 |
1.4547 |
S31254 |
254SMo |
X1CrNiMoCuN20-18-7 |
DIN EN 10088-2 |
A240 A312 A358 |
473 |
8.0 |
1.4562 |
N08031 |
Alloy31 |
X1NiCrMoCu32-28-7 |
SEW 400 |
B625/B619. B622 B626 |
509 |
8.0 |
1.4563 |
N08028 |
Alloy28 |
X1NiCrMoCu31-27-4 |
DIN EN 10088-2 |
B709/B668 |
483 |
8.0 |
1.4565/
1.4565S |
S34565 |
|
X2CrNiMnMoNbN25-18-5-4 |
SEW 400 |
A240/A312 |
537 |
8.0 |
1.4591 |
R20033 |
|
X1CrNiMoCuN33-32-1 |
SEW 400 |
B625/B622 B619 B626 |
516 |
7.9 |
1.4828 |
S30900 |
|
X15CrNiSi20-12 |
DIN EN 10095/SEW470 |
A167 |
|
7.9 |
1.4841 |
S31000
S31400 |
|
X15CrNiSi25-21 |
DIN EN 10095/SEW470 |
A167 |
|
7.9 |
1.4876 |
N08800 |
Alloy800 |
X10NiCrAlTi32-21 |
DIN EN 10095/SEW470 |
A240 B409/B163 B407 |
412.434 |
8.0 |
1.4958 |
N08810 |
Alloy800H |
X5NiCrAlTi31-20 |
DIN EN 10028-7/DIN 17459 |
A240 B409/B163 ASTM B407 B514 B515 |
|
8.0 |
1.4959 |
N08811 |
Alloy 800HT |
XBNiCrAlTi32-21 |
DIN EN 10028-7/DIN 17459 |
A240 B409/B163 B407 |
|
8.0 |
CW352H
(2.0872) |
C70600 |
|
CuNi10Fe1Mn |
DIN EN 1652 |
B122 B171 /B466 B467 |
420 |
8.94 |
CW354H
(2.0882) |
C71500 |
|
CuNi30MnFe |
DIN EN 1652 |
B122 B171/B467 |
420 |
8.94 |
2.4066 |
N02200 |
Nickel 200 |
Ni99,2 |
DIN 17740/DIN 17751 |
B162/B161 B163 B725 |
|
8.9 |
2.4068 |
N02201 |
Nickel 201 |
LC-Ni99 |
DIN 17740/DIN 17751 |
B162 /B161 B163 |
345 |
8.9 |
2.4360 |
N04400 |
Alloy400 |
NiCu30Fe |
DIN17743 DIN17750/17751 |
B127 B163 B165 |
263 |
8.8 |
2.4600 |
N10675 |
Hastelloy B3 |
NiMo29Cr |
DIN 17744 DIN17750 |
B333/B619 B622 B626 |
512,517 |
9.2 |
2.4602 |
N06022 |
Hastelloy C22 |
NiCr21Mo14W |
DIN 17744 DIN17750 |
B575 B619 B622 B626 |
479 |
8.7 |
2.4605 |
N06059 |
Alloy59 |
NiCr23Mo16Al |
DIN 17744 DIN17750 |
B575 B619 B622 B626 |
505 |
8.6 |
2.4610 |
N06455 |
Hatelloy C4 |
NiMo16Cr16Ti |
DIN 17744 DIN17750/17751 |
B575 B619 B622 B626 |
424 |
8.6 |
2.4617 |
N10445 |
AlloyB2 |
NiMoFe6928 |
|
|
|
|
2.4633 |
N06025 |
Alloy33 |
NiCr25FeAlY |
DIN 17742 DIN17750 |
B168/B163 B167 B516 B517 B546 |
540 |
7.9 |
2.4650 |
N07263 |
|
NiCo20Cr20MoTi |
DIN 17744 DIN17750 |
|
|
8.4 |
2.4816 |
N06600 |
Alloy600 |
NiCr15Fe |
DIN EN 10095 DIN 17742
DIN 17750/17751 |
B168/B163 B167 B516 B517 |
305 |
8.5 |
2.4819 |
N10276 |
Alloy C276 |
NiMo16Cr15W |
DIN 17744 DIN17750/17751 |
B575/B619 B622 B626 |
400 |
8.9 |
2.4851 |
N06601 |
Alloy601 |
NiCr23Fe |
DIN EN 10095
DIN 17742 17750 17751 |
B168 B167 B163 |
|
8.2 |
2.4856 |
N06625 |
Alloy625 |
NiCr22Mo9Nb |
DIN EN 10095 DIN 17744
17750/17751 |
B443/B444 B704 B705 |
499 |
8.4 |
2.4858 |
N08825 |
Alloy825 |
NiCr21Mo |
DIN 17742 17750 /17751 |
B424/B163 B423 B704 B705 |
432 |
8.1 |